Volume 107 (2017), Edition 01-02

Search publication

Bibliographic data

ISSN-Print

1436-4980

ISSN-Online

1436-4980

Publisher

VDI fachmedien, Düsseldorf

Language

German

Product type

Volume

Articles

Article

No access

Titelei/Inhaltsverzeichnis

Page 1 - 3

VDI Fachmedien GmbH & Co. KG, Düsseldorf 2017

doi.org/10.37544/1436-4980-2017-01-02-1

Article

No access

Analyse zur Anfahrstrategie beim Flankenfräsen*/Analysis of the endmill-entry strategy - Development of a characteristic value for evaluating the endmill-entry strategy in milling titanium

Page 2 - 7

VDI Fachmedien GmbH & Co. KG, Düsseldorf 2017

Authors: E. Prof. Abele | C. Hasenfratz | F. Geßner

doi.org/10.37544/1436-4980-2017-01-02-4

Article

No access

Mikrofräsbearbeitung von austenitischem Edelstahl*/Micro milling of austenitic stainless steel

Page 8 - 13

VDI Fachmedien GmbH & Co. KG, Düsseldorf 2017

Authors: D. Prof. Biermann | S. Hannich | M. Bücker

doi.org/10.37544/1436-4980-2017-01-02-10

Article

No access

Drehen von Vermicularguss unter kryogener Kühlung*/Turning compacted graphite iron under cryogenic cooling - Studies on the impact of process cooling on material and chip formation properties

Page 14 - 20

VDI Fachmedien GmbH & Co. KG, Düsseldorf 2017

Authors: M. Prof. Oechsner | M. Siebers | H. Scheerer | G. Andersohn | E. Prof. Abele | T. Heep

doi.org/10.37544/1436-4980-2017-01-02-16

Article

No access

Werkzeugverlagerung beim Reiben*/Measuring the tool deviation during reaming with sensoric tools

Page 21 - 26

VDI Fachmedien GmbH & Co. KG, Düsseldorf 2017

Authors: E. Prof. Abele | A. Bretz

doi.org/10.37544/1436-4980-2017-01-02-23

Article

No access

Untersuchung des Einflusses der Nebenschneiden auf den Reibprozess*/Influence of secondary cutting edges on the reaming process

Page 27 - 33

VDI Fachmedien GmbH & Co. KG, Düsseldorf 2017

Authors: E. Prof. Abele | N. Lautenschläger

doi.org/10.37544/1436-4980-2017-01-02-29

Article

No access

Simulation des orthogonalen Zerspanens mit LS-Dyna*/Simulation of the orthogonal cutting process with LS-Dyna - Comparison of Lagrangian-, Eulerian- and SPH cutting models

Page 34 - 38

VDI Fachmedien GmbH & Co. KG, Düsseldorf 2017

Authors: M. Storchak | F. Diemer

doi.org/10.37544/1436-4980-2017-01-02-36

Article

No access

Kleine Unwucht – große Wirkung/Dynamic systems for cutting force compensation

Page 39 - 44

VDI Fachmedien GmbH & Co. KG, Düsseldorf 2017

Authors: O. Kuklevskyi | S. Weiland | T. Stehle

doi.org/10.37544/1436-4980-2017-01-02-41

Article

No access

Innovative Prozesskette zur UHC-Bauteilfertigung/Innovative process chain for manufacturing ultra-high-carbon component - High performance manufacturing process for an economical serial production of lightweight steel

Page 45 - 51

VDI Fachmedien GmbH & Co. KG, Düsseldorf 2017

Authors: A. Weidle | P. Lippmann | A. Akkaya

doi.org/10.37544/1436-4980-2017-01-02-47

Article

No access

Ultraschallunterstütztes Umformen und Verstemmen/Ultrasonic-assisted forming and caulking – Current results of the joint research project “UltraCaulk”

Page 52 - 58

VDI Fachmedien GmbH & Co. KG, Düsseldorf 2017

Authors: U. Leicht | M. Michalski | M. Merklein

doi.org/10.37544/1436-4980-2017-01-02-54

Article

No access

Einfluss der Andrückrollenhärte beim Microfinishen*/Microfinishing - Influence of the pressure roller hardness: Analysis of the contact conditions and the obtained surface roughness

Page 59 - 65

VDI Fachmedien GmbH & Co. KG, Düsseldorf 2017

Authors: D. Prof. Biermann | M. Kansteiner | M. Tilger | P. Wiederkehr

doi.org/10.37544/1436-4980-2017-01-02-61

Article

No access

Vibrationsunterstützte Senkerosion*/Vibrations-assisted EDM-machining of seal slots

Page 66 - 73

VDI Fachmedien GmbH & Co. KG, Düsseldorf 2017

Authors: E. Prof. Uhlmann | D. C. Domingos | S. Yabroudi | R. Bolz

doi.org/10.37544/1436-4980-2017-01-02-68

Article

No access

Bohrfolien erhöhen Bearbeitungsqualität*/Application of supportive foils in drilling fibre-reinforced plastics - Functional supportive foils increase machining quality in drilling fibre reinforced plastics

Page 74 - 80

VDI Fachmedien GmbH & Co. KG, Düsseldorf 2017

Authors: D. Becker | M. Schneider | P. Esch

doi.org/10.37544/1436-4980-2017-01-02-76

Article

No access

Gleitreibung der tribologischen Paarung CFK – Werkzeugschneidenoberfläche*/Sliding friction of the tribological pair of CFRP / tool cutting surface

Page 81 - 86

VDI Fachmedien GmbH & Co. KG, Düsseldorf 2017

Authors: T. Stehle | B. Prof. Azarhoushang | D. Becker | R. Eisseler

doi.org/10.37544/1436-4980-2017-01-02-83

Article

No access

Temperaturanalyse beim Trennschleifen von CFK*/Temperature analysis during the cut-off grinding of CFRP

Page 87 - 93

VDI Fachmedien GmbH & Co. KG, Düsseldorf 2017

Authors: Y. Babenko | M. Schneider | A. Gebhardt

doi.org/10.37544/1436-4980-2017-01-02-89

Article

No access

Surface Engineering

Page 94 - 95

VDI Fachmedien GmbH & Co. KG, Düsseldorf 2017

Authors: M. Farajian | J. Schubnell | M. Luke

doi.org/10.37544/1436-4980-2017-01-02-96

Article

No access

Ansätze zur Planung von Kommissioniersystemen*/Approaches to the planning of order picking systems

Page 96 - 101

VDI Fachmedien GmbH & Co. KG, Düsseldorf 2017

Authors: A. Martini | T. Mauksch | U. Prof. Stache

doi.org/10.37544/1436-4980-2017-01-02-98

Article

No access

Smart Maintenance – Asset Management der Zukunft*/Smart Maintenance - Asset management for the future An integrative management approach

Page 102 - 106

VDI Fachmedien GmbH & Co. KG, Düsseldorf 2017

Authors: S. Bärenfänger-Wojciechowski | M. Austerjost | M. Prof Henke

doi.org/10.37544/1436-4980-2017-01-02-104