Cover des Buchs: International Conference on Gears 2019
Im Shop erwerben
, um zu prüfen, ob Sie einen Vollzugriff auf diese Publikation haben.
Sammelband Teilzugriff

International Conference on Gears 2019

Herausgeber:innen:
Reihe:
VDI-Berichte, Band 2355
Verlag:
 2019

Zusammenfassung

Der Bericht ist ausschließlich als PDF-Dokument erschienen!

Drei Konferenzen in einer, auf 1.874 Seiten finden Sie jede Menge aller neueste Informationen zum Thema Gears.

Die beiden anderen Konferenzen waren:

3rd International Conference on High Performance Plastic Gears 2019

und

3rd International Conference on Gear Production 2019

Achtung:

Dieser VDI-Bericht ist ausschließlich als PDF-Datei auf CD-ROM lieferbar!

Auszug aus dem 22-seitigen Inhaltsverzeichnis:

Foreword 1

K. Stahl, Technische Universität München (TUM), Garching

International Conference on Gears 2019

Flank strength

Influence of gear surface roughness on pitting and micropitting life 3

E. Bergstedt, Prof. U. Olofsson, KTH, Stockholm, Sweden;

J. Lin, Beijing University of Technology, Beijing, China;

P. Lindholm, ABB Corporate Research, Västerås, Sweden

Influence of stressed volume of tooth flank on the surface durability 15

A. Kubo, Research Institute for Applied Sciences, Ooicho, Kyoto, Japan

Transfer of the tooth fl...

Schlagworte

Publikation durchsuchen

Bibliographische Angaben

Copyrightjahr
2019
ISBN-Print
978-3-18-092355-0
ISBN-Online
978-3-18-102355-6
Verlag
VDI Verlag, Düsseldorf
Reihe
VDI-Berichte
Band
2355
Sprache
Deutsch
Seiten
XXVIII
Produkttyp
Sammelband

Inhaltsverzeichnis

KapitelSeiten
  1. Titelei/Inhaltsverzeichnis Teilzugriff I - XXVI Download Kapitel (PDF)
  2. Foreword Kein Zugriff 1 - 2 K. Stahl
      1. Influence of gear surface roughness on pitting and micropitting life Kein Zugriff 3 - 14 E. Bergstedt, U. Olofsson, J. Lin, P. Lindholm
      2. Influence of stressed volume of tooth flank on the surface durability Kein Zugriff 15 - 24 A. Kubo
      3. Transfer of the tooth flank stress into an analogy test concept to provoke the damage pattern tooth flank fracture (TFF) Kein Zugriff 25 - 36 C. Brecher, C. Lopenhaus, F. Goergen
      4. Effect of surface characterization induced by fine shot peening on scuffing of steel roller Kein Zugriff 37 - 46 Y. Omiya, M. Fujii, H. Sekishita, K. Ishimoto, A. Ueda
      1. Bionic tooth root: fatigue testing and potential on gear units Kein Zugriff 47 - 56 F. Lubos, Z. Roth
      2. Planetary gears: modes, noise and modifications application and validation of simulation and experiment Kein Zugriff 57 - 68 M. Heider, B. Pinnekamp, A. Beinstingel
      3. Noise characteristics induced by micropitting formed on particle-based parkerized gears Kein Zugriff 69 - 78 R. Saito, K. Matsuo, Y. Suzuki
      4. Experimental study of railway gearbox whining noise Kein Zugriff 79 - 90 K. Landet, J. Perret-Liaudet, E. Rigaud, J. Y. Guerder, M. Fraces
      1. Windage power loss reductions in high-speed gear pairs Kein Zugriff 91 - 100 M. Ruzek, F. Ville, P. Velex, Y. Marchesse
      2. Power loss analysis of different high-power density gearbox typologies: CFD analysis and experimental measurements on a cycloidal gear set Kein Zugriff 101 - 114 F. Concli, L. Maccioni, C. Gorla
      3. Scaling of planetary gear stages according to gear loss similarity Kein Zugriff 115 - 126 F. Siglmuller, U. Weinberger, J. Gotz, M. Sedlmair, T. Lohner, K. Stahl
      4. Analysis on the efficiency of HypoGear Kein Zugriff 127 - 136 F. Eigner, R. Michel, M. Berger
      1. Optimized tooth root strength by controlled shot peening Kein Zugriff 137 - 148 J. Hoffmeister, J. Hermes
      2. Optimisation of spur gear tooth fillet for maximum bending strength using Bezier curves Kein Zugriff 149 - 160 G. Vasileiou, N. Rogkas, V. Spitas, P. Zalimidis
      3. Simulation of the tooth root strength under consideration of material quality, finishing process and size effects Kein Zugriff 161 - 172 J.-A. Meis, F. Teklote, M. Borowski
      4. Flank load carrying capacity of hard-soft gear pairings Kein Zugriff 173 - 184 B. J . Siewerin, T. Tobie, K. Stahl, A. Dobler
      1. Loaded tooth contact analysis of bevel gears with complex gear body Kein Zugriff 185 - 192 F. Mieth, B. Schlecht
      2. FEM analysis of the load distribution over the face width of helical gear pairs considering deviations, misalignments and deformations Kein Zugriff 193 - 202 A. Mihailidis, A. Psarros
      3. Improved tooth contact analysis by using virtual gear twins – How helpful is AI for finding best gear design? Kein Zugriff 203 - 216 B. Schlecht, T. Schulze
      4. Co-simulation of the tooth contact of bevel gears within a multibody simulation Kein Zugriff 217 - 228 W. Wagner, S. Schumann, B. Schlecht
      1. Condition monitoring of gearboxes using magnetoresistive sensors Kein Zugriff 229 - 244 R. Slatter
      2. Deep online oil analysis of dielectric parameters for life time enhancement of industrial gearboxes – Identification of critical operation conditions for reduction of failure rates Kein Zugriff 245 - 256 M. R. Mauntz, J. Peuser
      3. Comparing data sources for condition monitoring suitability Kein Zugriff 257 - 268 M. Fromberger, S. Sendlbeck, M. Rothemund, J. Gotz, M. Otto, K. Stahl
      4. Monitoring concept study for aerospace power gear box drive train Kein Zugriff 269 - 286 S. Nowoisky, M. Grzeszkowski, C. Guhmann, J. G. Pelham
      1. Investigations into non-metallic inclusion crack area characteristics relevant for tooth root fracture damages of case carburised and shot-peened high strength gears of different sizes made of high-qu... Kein Zugriff 287 - 300 D. Fuchs, T. Tobie, K. Stahl, S. Schurer
      2. Investigations on the pitting load capacity of internal spur and helical gears Kein Zugriff 301 - 314 M. Geitner, T. Tobie, K. Stahl, B. Zornek
      3. Wear prediction for double helical gears grinded by forming method Kein Zugriff 315 - 330 H. Wang, X. Wen, C. Zhou, Z. Liu
      1. Investigation of transient response motion of differential planetary gear train during reverse rotation and starting by using high-speed camera monitoring Kein Zugriff 331 - 342 T. Fukuda, M. Nakagawa, T. Hirogaki, E. Aoyama
      2. Analysis of dynamic transmission error for nutation drive with double circular arc gears under assembly errors and different loads Kein Zugriff 343 - 354 Y. Cai, L. Yao, J. Ding, S. Ouyang, J. Zhang
      3. Experimental and numerical investigation of helical gear transmission error under gear misalignments Kein Zugriff 355 - 366 D. Park, F. Santini, A. Rezayat, T. Tamarozzi, J. Pavel
      1. Optimization of hypoid gear macro/micro geometries for high efficiency drives, taking into consideration NVH and strength Kein Zugriff 367 - 378 K. Takaki, M. Sugimoto
      2. Design and CnC manufacturing of face milled beveloid gears Kein Zugriff 379 - 390 C. Gosselin, E. Fritz, L. Seiler
      3. Analytical design method for beveloid gears with a small shaft angle and offset Kein Zugriff 391 - 402 D. Marino, H. Binz, M. Bachmann
      1. Optimization of asymmetric tooth root generated with protuberance hob Kein Zugriff 403 - 414 A. L. Kapelevich, Y. V. Shekhtman
      2. DIN Q6 meets DIN Q10 – Need for modern internal gear production Kein Zugriff 415 - 424 T. Kleiber
      3. Prediction of transmission accuracy lifetime of RV gearbox Kein Zugriff 425 - 436 C. Liu, W. Shi, F. Maria Cura, A. Mura
      4. Parametric Study of a 3D trochoidal reducer model with involute profile Kein Zugriff 437 - 448 T. Pinel, J. Bruyere, P.Velex, L. Billet
      1. Investigation of dynamic modeling and vibration transmission characteristics of helicopter main gearbox Kein Zugriff 449 - 460 H. Xu, D. Qin, C. Liu, Y. Yi, H. Jia
      2. A study of dynamic behavior of tractor pto driveline to analyze a rattle noise Kein Zugriff 461 - 470 J. Ahn, C. H. Choi, J. H. Yu, S. C. Kim
      3. Dynamic models for planetary gearboxes SHM Kein Zugriff 471 - 480 F. Concli, C. Gorla
      4. Dynamic simulation for double input compound power-split mechanism of in-wheel motor driven EVs Kein Zugriff 481 - 492 X. Yang, N. Yue, Q. Yang, L. Wang, Y. Shao, H. Xiong
      1. Design and rating by means of loaded TCA of straight bevel differential gears Kein Zugriff 493 - 504 J. Thomas, C. Gosselin, P. Eng
      2. Investigation of meshing phenomenon of hypoid gears with different offsets via high response infrared video thermography Kein Zugriff 505 - 516 K. Mukaiyama, M. Nakagawa, T. Hirogaki, E. Aoyama
      3. New calculation method of the micropitting load carrying capacity of bevel and hypoid gears Kein Zugriff 517 - 528 J. Pellkofer, M. Hein, K. Stahl, T. Reimann, M. Hombauer
      4. Transient 3D TEHL simulation of spiral bevel gears under mixed friction conditions Kein Zugriff 529 - 540 R. Beilicke, L. Bobach, D. Bartel
      1. Tribo-dynamics model of a spur gear pair with gyroscopic effect and flexible shaft Kein Zugriff 541 - 554 B. Hu, M. Zheng, C. Zhou
      2. Calculation of mixed friction conditions in large-scale rolling-sliding contacts for different surface structures Kein Zugriff 555 - 568 D. Mevissen, C. Lopenhaus, T. Bergs
      3. White etching crack bearing failure: identification of high risk lubricant compounds using artificial neural networks Kein Zugriff 569 - 582 B. Azzam, F. Harzendorf, R. Schelenz, G. Jacobs, W. Holweger
      1. Prediction of heat generation of crossed axis gearbox Kein Zugriff 583 - 594 A. Miltenović, M. Banić, V. Miltenović
      2. A method to determine local wear of worm gears with highly resolved circumferential backlash curves Kein Zugriff 595 - 606 K. Daubach, Manuel Oehler, Bernd Sauer
      3. Curvature interference characteristic of conical worm gear Kein Zugriff 607 - 618 Y. Zhao, Q. Meng, Z. Yang
      1. A methodology for measurement of loaded transmission error of hypoid gear pair with misalignments Kein Zugriff 619 - 634 H. Blettery, D. Talbot, A. Kahraman, H. Xu
      2. Dynamic model of bevel gearing with friction damper Kein Zugriff 635 - 644 E. V. Kozharinov, J. M. Temis
      3. An easy-to-use and fast computational model for the prediction of the influence of manufacturing errors on gear transmission error Kein Zugriff 645 - 656 A. D. Rauch, C. Wirth
      1. Determination of S-N curves for pitting based on local damage analysis Kein Zugriff 657 - 668 F. Muller, S. Schumann, B. Schlecht
      2. Minimizing gear friction with water-containing gear fluids Kein Zugriff 669 - 680 M. Yilmaz, T. Lohner, K. Michaelis, K. Stahl
      3. Hydrogen embrittlement of oil lubricated contacts Kein Zugriff 681 - 688 D. Kurten, A. Kailer
      1. ISO Standard based method for determining a global in-operation dynamic factor KAV in gears subjected to variable velocity and loading conditions Kein Zugriff 689 - 700 F. Cura
      2. REXS – Standardized gear unit model Kein Zugriff 701 - 712 M. Keuthen
      3. Automated requirements-driven design synthesis of gearboxes with graph-based design languages using state of the art tools Kein Zugriff 713 - 726 K. Holder, C. Salander, S. Rudolph, R. Stetter
      4. Investigation of the potential of using surrogate models in the gear design process Kein Zugriff 727 - 740 J. Brimmers, M. Willecke, C. Lopenhaus, C. Brecher
      1. Dynamic modeling and analysis of a star-wheel reducer Kein Zugriff 741 - 752 J. Zhang, J. Wang
      2. Wolfrom gearboxes for lightweight, human-centered robotics Kein Zugriff 753 - 764 P. Lopez Garcia, S. Crispel, T. Verstraten, E. Saerens, B. Vanderborght, D. Lefeber
      3. Influence of tooth profile modifications on the dynamic behavior of a planetary gear set – Experimental investigation and numerical validation for different amplitudes of tooth profile modifications Kein Zugriff 765 - 776 J. Neufond, E. Rigaud, J. Perret-Liaudet, A. Carbonelli
      4. Influence of tooth profile modification on planetary gear sets dynamic Kein Zugriff 777 - 784 D. V. Kalinin, J. Y. Temis
      1. Investigation of the influence of elastic gear body structures on the operational behavior of gears Kein Zugriff 785 - 796 P. Scholzen, C. Lopenhaus, C. Brecher, D. Billenstein, F. Rieg, G. Hammerl
      2. Consideration of elastic deformations of gear bodies using a reduction on a fourier series Kein Zugriff 797 - 808 M. Raabe
      3. A gear load distribution model for planetary gear set with a flexible carrier Kein Zugriff 809 - 822 L. Ryali, D. Talbot
      4. Hybrid models for the study of gear body dynamic deflections – Gear body modes Kein Zugriff 823 - 834 B. Guilbert, P. Velex, P. Cutuli
      1. Experimental and theoretical study of load mesh factor for different boundary conditions in wind gearbox planetary stages Kein Zugriff 835 - 844 H. Aurrekoetxea, I. Ruiz de Ocenda
      2. A study of gear oil performances contributing to wind turbine lifetime extensions Kein Zugriff 845 - 856 S. Yokoyama
      3. Optimized electrified drivetrains and duty cycle testing methods related to future autonomous driving vehicle concepts Kein Zugriff 857 - 866 R. Worner, L. Pott, M. Lutz, C. Kajinski, H. Scheihing, C. Pasler
      4. Two-speed transmission based on energy-efficient MRF-coupling elements and power split mechanism Kein Zugriff 867 - 876 C. Hegger, T. Kruger, J. Maas
      1. Conventional high-strength nodular graphite iron as a substitute for austempered ductile iron (ADI) Kein Zugriff 877 - 892 J. Lohmiller, J. Hoffmeister, J. Hermes
      2. Japanese standardization for gear steel qualification via evaluation of HV-scattering Kein Zugriff 893 - 902 A. Kubo, M. Nagae, K. Kawasaki
      3. Modelling of high power geared transmissions, introduction of a filling material Kein Zugriff 903 - 914 C. Chevrel-Fraux, R. Fargere, J. Bruyere, P. Velex
      4. Gear performance beyond current standards – Implementing increased material fatigue performance in gears Kein Zugriff 915 - 924 E. Lothman, L. Kamjou, E. Claesson
      1. Tooth contact analysis of non-circular gears with non-involute tooth profiles: Application to horological spur gears Kein Zugriff 925 - 936 M. Chapron, Q. Theurillat-Bonjour
      2. Derivation of tooth stiffness of asymmetric gears for loaded tooth contact analysis Kein Zugriff 937 - 948 B. Mahr, A. Pogacnik, A. Langheinrich
      3. Tooth root bending capacity – An analysis of stress and strength Kein Zugriff 949 - 958 H. Linke, R. Hess
      4. Experimental verification of improvements in static and fatigue bending capacity of spur gear tooth via tooth root design optimization Kein Zugriff 959 - 972 N. Yildirim, M. Yasar, E. Yildirim, F. Erdogan, B. Karatas
      1. Conjugate tooth profile of circular spline to involute flex gear in strain wave gearing Kein Zugriff 973 - 984 I. Moriwaki, S. Doi, Asso. D. Iba, T. Yomenura, K. Haizumi
      2. Load sharing model for high contact ratio spur gears with long profile modifications Kein Zugriff 985 - 996 J. I. Pedrero, M. Pleguezuelos, M. B. Sanchez
      3. A study on tooth profile modification of cycloid planetary gear drive with tooth number difference of two Kein Zugriff 997 - 1010 S.-J. Tsai, VDI, L. C. Chang, C.-H. Huang
      4. Research on Dynamic Drum Shape Modification of Helical Gear Pair Kein Zugriff 1011 - 1026 L. Hui, X. Changl, Y. Shouw, L. Cheng, Z. Chen, L. Yu
      1. Detection of surface damages by non-destructive micromagnetic methods Kein Zugriff 1027 - 1038 B. Karpuschewski
      2. Ring gear tooth cracks detected using instantaneous angular speed: wind turbine application Kein Zugriff 1039 - 1052 Y. Hawwari, J. Touzet, H. Andre, H. I. Cakar, I. Khelf, L. Alloin
      3. Sensorless evaluation of the ideal timing for oil-change Kein Zugriff 1053 - 1064 J. Lotz, B. Bouche, R. Thiele
      4. Transferring knowledge about gear systems to machines in order to improve diagnosis efficiency Kein Zugriff 1065 - 1076 A. Carbonelli
      1. Use of multiple-body simulation during the development process of gear units Kein Zugriff 1077 - 1086 M. Lutz, J. Hermes
      2. Application of pre-calculated gear mesh stiffness on elastic gear bodies in multi-body simulation Kein Zugriff 1087 - 1098 F. Andary, G. Jacobs, J. Berroth
      3. Analysis of manufacturing variability on the transmission error of an internal gear pair using a multibody framework Kein Zugriff 1099 - 1110 C. Natali, A. Rezayat, D. Park, P. Jiranek, T. Tamarozzi
      4. Robust force control of series elastic actuator using disturbance observer Kein Zugriff 1111 - 1122 X. Du, B. Chen, X. Shan
      1. Improving the Estimation accuracy of fishing reel sensation caused by gear vibration using tactile response delay time Kein Zugriff 1123 - 1134 T. Inoue, S. Kurokawa
      2. Creation of gear self-controlled variator Kein Zugriff 1135 - 1144 K. S. Ivanov, E. K. Yaroslavtseva
      3. High speed driven tool for machine tools using magnetic transmission technology Kein Zugriff 1145 - 1154 S. Vonderschmidt, A. Ott, A. Vonderschmidt
      4. Study on the contact characteristics of threaded surfaces in a planetary roller screw mechanism Kein Zugriff 1155 - 1164 S. J. Ma, G. Y. Wu, G. Liu
      1. Effect of installation errors on beveloid gears’ precision ground by cone-shape worm wheel Kein Zugriff 1165 - 1172 B. Cao, G. Li
      2. Evaluation method of measuring software based on virtual gear measuring center Kein Zugriff 1173 - 1180 C. Lu, J. Wang, P. Yin
      3. Index hobbing for asymmetrical gears Kein Zugriff 1181 - 1186 P. Falbriard
      4. Micro-hobbing Kein Zugriff 1187 - 1190 P. Falbriard
      5. Visualization of phase differences between tooth helix deviations using graph theory Kein Zugriff 1191 - 1198 D. Iba, I. Moriwaki, H. Noda, H. Inoue, M. Kim
      6. Proposal of linear mapping model among machining processes for gear tooth surface using graphic analysis Kein Zugriff 1199 - 1206 J. Hongu, H. Noborio, T. Koide, A. Tamura
      7. Multisensory measurement of the base circle radius as a fundamental shape parameter of large gears Kein Zugriff 1207 - 1214 M. Pillarz, A. von Freyberg, A. Fischer
      8. Investigation on dynamic behavior of differential gearing with herringbone teeth Kein Zugriff 1215 - 1222 K. Liu, H. Liu, W. Shi
      9. The Analysis on Grease Lubrication at Two Tapered Bodies Contact Considering Surface Roughness Kein Zugriff 1223 - 1236 Z. H. Wu, Y. Q. Xu, K. A. Liu
      10. 2-stage gearbox optimization to minimize weight and maximize gear mesh efficiency considering the gear ratio for high speed gear Kein Zugriff 1237 - 1244 S.-G. Moon, S.-C. Kim, J.-H. Sohn, G.-H. Lee
      11. Study of lateral and torsional vibration distribution of two-stage planetary gears based on vibration energy theory Kein Zugriff 1245 - 1252 Z. Zhan, H. Liu, C. Xiang, Q. Yan, H. Li, W. Wei, L. Xu
      12. Efficiency modelling and analysis for a novel double-arc bevel gear nutation transmission system for pure electric vehicles Kein Zugriff 1253 - 1258 N. Wan, L. Yao
      13. Life extension for gearboxes through predictive maintenance Kein Zugriff 1259 - 1262 S. Bill
      14. Test stand for internally cooled metal gears Kein Zugriff 1263 - 1266 H.-J. Dennig, S. Winterberg
      1. Comparison of strength ratings of plastic gears by VDI 2736 and JIS B 1759 – In vision of building a new international standard Kein Zugriff 1267 - 1278 I. Bae, U. Kissling
      2. Thermoplastic high performance composite gears Kein Zugriff 1279 - 1290 H.-J. Dennig, S. Monn, A. Vodermayer
      3. Determination of fatigue strength of plastic gears under consideration of environmental influences Kein Zugriff 1291 - 1298 K. Humm, M.-S. Wirth, A. Linnemann, T. Schalk
      4. Extension of the application limits for crossed helical gearboxes by new geometries for smaller sliding paths or smaller contact pressures Kein Zugriff 1299 - 1310 C. Boehme, D. Vill, P. Tenberge
      5. Comparison between VDI 2736 wear calculation and experimentally obtained results Kein Zugriff 1311 - 1322 S. Matkovič, A. Pogačnik, M. Kalin
      6. Predicting wear for high performance plastic gears Kein Zugriff 1323 - 1334 B. van Wissen, M. Kanters, F. Mitsuzuka, K. Iwanaga, Ir. A. Hasanovic
      7. Material data for advanced plastic gear simulation Kein Zugriff 1335 - 1344 J. Cathelin
      8. Wear resistant plastics – Bespoke plastic compounds for plastic gears Kein Zugriff 1345 - 1356 K. Smrczkova
      9. Advances in polyacetal materials for gears Kein Zugriff 1357 - 1366 R. Ratnagiri, M. Kato, H. Kuchelka
      10. spur gears Kein Zugriff 1367 - 1378 B. Gierl, D. Drummer
      1. Flank load carrying capacity of oil-lubricated high performance plastic gears – Analysis of the pitting development in back-to-back tests Kein Zugriff 1379 - 1390 C. M. Illenberger, T. Tobie, K. Stahl
      2. Detailed analyses of film thickness and friction in thermoplastic EHL contacts Kein Zugriff 1391 - 1400 E. Maier, T. Lohner, K. Stahl, P. Sperka, M. Hartl
      3. Design of gear surface models for 3D-printing of plastic gears Kein Zugriff 1401 - 1410 S. Detzel, Y. S. Krieger, M. F. Traeger, T. C. Lueth
      4. Thermal simulation of anisotropic PEEK-based tribocomposites Kein Zugriff 1411 - 1420 N. C. Ecke, A. K. Schlarb, J. Holler, Jan Niedermeyer, P. Klein
      1. Powertrain NVH improvement with high-performance polymer gears Kein Zugriff 1421 - 1430 R. Weidig, H. J. Weimar
      2. Improvement of the noise and vibration behavior of an electromechanical brake booster – An integral approach Kein Zugriff 1431 - 1442 J. Fechler, S. Oberle, M. Knopfle, V. Merz
      3. Vibration-based plastic gear crack detection system using a pre-learned convolutional neural network Kein Zugriff 1443 - 1452 B. H. Kien, D. Iba, Y. Ishii, Y. Tsutsui, N. Miura, T. Iizuka, A. Masuda, A. Sone, I. Moriwaki
      1. Simulation tool-chain for plastic gear design Kein Zugriff 1453 - 1460 M. Uhlig, C. Pastor
      2. Layout of profile modifications for symmetric and asymmetric plastic gears Kein Zugriff 1461 - 1472 A. Pogačnik, U. Kissling
      3. A multi-criteria polymer gears design optimisation procedure Kein Zugriff 1473 - 1484 J. Tavčar, J. Kos, D. Zorko, J. Duhovnik
      4. Complementary strengths of orbitless & planetary drives Kein Zugriff 1485 - 1496 L. Stocco
      1. Virtual gauge for splined shaft-hub joints – Quality inspection and assembly of involute splines in the context of Industry 4.0 Kein Zugriff 1497 - 1508 K. Lubke
      2. Methodical analysis and selection of auto identification systems in the gear box manufacturing Kein Zugriff 1509 - 1520 T. Sturmlinger, A. Comak, A. Albers, S. Gerdhenrichs, R. H. Schmitt
      3. Digital twin of gear measuring center (dtgmc) Kein Zugriff 1521 - 1532 P. L. Yin, J. H. Wang, C. X. Lu
      4. Combining gear design with manufacturing process decisions Kein Zugriff 1533 - 1544 U. Kissling, U. Stolz, A. Turich
      1. Optical gear measurement: holographic system for 100 % inspection Kein Zugriff 1545 - 1550 A. Schiller, T. Beckmann, M. Fratz, T. Seyler, A. Bertz
      2. Measurement of gear racks with variable transmission ratio Kein Zugriff 1551 - 1556 H. Rohr
      3. Temperature influence on involute gear measurements Kein Zugriff 1557 - 1566 A.-K. Wiemann, M. Stein, K. Kniel
      4. Scattered light measurement on worm gears with high efficiency requirements Kein Zugriff 1567 - 1578 B. Brodmann, H. Bodschwinna
      1. Gear skiving of external gears with internally geared tools Kein Zugriff 1579 - 1590 J. Klose, F. Zanger, V. Schulze
      2. Potentials and limits of gear hobbing with cooling lubricants Kein Zugriff 1591 - 1602 B. Karpuschewski, D. Sackmann, M. Kochig, M. Beutner, F. Welzel
      3. Large ring gear milling technology on universal machines – Philosophy of complete machining concept on a universal machine Kein Zugriff 1603 - 1618 P. Schneyer
      1. Micro skiving – (r)evolution of a known production process Kein Zugriff 1619 - 1634 H. Baour, P. Falbriard
      2. Machining process solutions to support the reduction of distortion in ring gears after heat treatment Kein Zugriff 1635 - 1646 A. Spatzig, N. Fujimura, T. Monden, T. Kikuchi, K. Yoshikawa, A. Georgoussis
      3. Analysis of process forces and surface topography when manufacturing case-hardened gears by double flanked hard skiving Kein Zugriff 1647 - 1658 M. Zapf, J. Klose, F. Zanger, V. Schulze
      4. New possibilities for dry hard finishing of internal gears Kein Zugriff 1659 - 1664 G.-T. Weber
      1. Prospects of manufacturing spiroid gears with small gear ratios Kein Zugriff 1665 - 1674 V. I. Goldfarb, E. S. Trubachev, K. V. Bogdanov, T. A. Pushkareva
      2. Consideration of solid particles in a gear lapping simulation Kein Zugriff 1675 - 1686 F. Rudolph, S. Schumann, B. Schlecht
      3. Influence of elastic effects on the grinding force in plunging bevel gear grinding Kein Zugriff 1687 - 1696 M. Solf, C. Lopenhaus, T. Bergs
      1. Approach for modeling elasticity in the gear honing process Kein Zugriff 1697 - 1706 M. Schrank, C. Kiesewetter-Marko, C. Lopenhaus, A. Epple, T. Bergs, C. Brecher
      2. Simulation of tooth flank profile in the gear honing process Kein Zugriff 1707 - 1724 K. Matsuo, Y. Suzuki, I. Moriwaki
      3. A method of tooth longitudinal modification for internal gearing power honing Kein Zugriff 1725 - 1738 J. Han, Y. Zhu, X. Tian, L. Xia
      4. Discretization of the contact conditions considering the grain engagement for generating gear grinding Kein Zugriff 1739 - 1748 P. H. O. Teixeira, C. Lopenhaus, C. Brecher, T. Bergs
      1. Lean heat treatment for distortion control Kein Zugriff 1749 - 1764 V. Heuer, D. Bolton
      2. Cold forging of gear components by a modified Samanta process Kein Zugriff 1765 - 1776 A. Weis, T. Deliktas, M. Liewald, N. Missal
      3. Lightweight forging initiative III: transmission lightweighting potential based on design and material concepts in a split-axle hybrid vehicle and a heavy-duty truck Kein Zugriff 1777 - 1786 H.-W. Raedt, T. Wurm, A. Busse
      4. Inline-deep rolling – a new approach to increase tooth root load capacity Kein Zugriff 1787 - 1798 B. Karpuschewski, T. Lierse, S. Schulze
      1. Evaluation of gear flank surface structure produced by skiving Kein Zugriff 1799 - 1812 M. Trubswetter, M. Otto, K. Stahl
      2. Gear standards for reliable measurement of noise-causing gears – Quick verification of the measurement precision Kein Zugriff 1813 - 1822 T. Kahnenbley, G. Gravel
      3. New improvement opportunities through applying topology optimization combined with 3D printing to the construction of gearbox housings Kein Zugriff 1823 - 1834 P. Barreiro, J. Hoffmeister, J. Hermes, A. Bronner
      4. Online estimate and compensation of the gear machining error based on electronic gearbox cross-coupling controller Kein Zugriff 1835 - XXVIII X. Tian, Y. Wu, J. Han, L. Xia

Ähnliche Veröffentlichungen

aus dem Schwerpunkt "Materialfluss & Fördertechnik"
Cover der Ausgabe: f+h Jahrgang 75 (2025), Heft 8
Ausgabe Kein Zugriff
Fördertechnik Materialfluss Logistik 4.0
Jahrgang 75 (2025), Heft 8
Cover der Ausgabe: f+h Jahrgang 75 (2025), Heft fokus-KMU
Ausgabe Kein Zugriff
Fördertechnik Materialfluss Logistik 4.0
Jahrgang 75 (2025), Heft fokus-KMU
Cover der Ausgabe: f+h Jahrgang 75 (2025), Heft 7
Ausgabe Kein Zugriff
Fördertechnik Materialfluss Logistik 4.0
Jahrgang 75 (2025), Heft 7
Cover der Ausgabe: f+h Jahrgang 75 (2025), Heft 6
Ausgabe Kein Zugriff
Fördertechnik Materialfluss Logistik 4.0
Jahrgang 75 (2025), Heft 6
Cover der Ausgabe: f+h Jahrgang 75 (2025), Heft 5
Ausgabe Kein Zugriff
Fördertechnik Materialfluss Logistik 4.0
Jahrgang 75 (2025), Heft 5

Hinweis

Dieses Werk ist urheberrechtlich geschützt und darf nur nach den Vorgaben der Nutzungs- und Lizenzvereinbarung genutzt werden. Jede darüber hinaus gehende Nutzung des Werkes ist ausdrücklich untersagt und wird verfolgt.

Feedback geben

Wir freuen uns über Ihr Feedback zu Inhalten und Funktionen. Ihre Nachricht hilft uns, unseren Service stetig zu verbessern.

Bewertung
Bild anhängen
oder hier ablegen
PNG oder JPG (max. 3 MB)

Anmelden

Passwort vergessen?
Login via Open Athens
Noch kein Benutzerkonto?
Jetzt registrieren

Publikation zitieren

Download: RIS BibTex