Cover des Buchs: International Conference on Gears 2025
, um zu prüfen, ob Sie einen Vollzugriff auf diese Publikation haben.
Sammelband Kein Zugriff

International Conference on Gears 2025

Autor:innen:
Reihe:
VDI-Berichte, Band 2460
Verlag:
 2025

Zusammenfassung

Content (Auszug) Foreword 1 AI and digitalization – Impact on the future of gears Powered by AI – Leading the future of drive technology 3 J. Reimann, J. Zundel, T. Sadek, Flender GmbH, Bocholt AI/ML-accelerated gear durability analysis within gear design optimization AI/ML-accelerated gear durability analysis within gear design optimization 7 M. Vivet, D. Park, A. Scheuer, Siemens Digital Industries Software, Leuven, Belgium Condition monitoring using AI Early Detection of Critical Operating Conditions in Journal Bearings of Gearboxes Using Acoustic Emission and Machine Learning 25 F. Wirsing, A. Saleh, G. Jacobs, D. Bosse, F. König, B. Lehmann, B. Klinghart, Institut für Maschinenelemente und Systementwicklung, RWTH Aachen University, Schinkelstraße 10, 52062 Aachen Condition Monitoring and Remaining Useful Lifetime Prediction of a Worm Gear based on Simulative, Lazy Learning, and Deep Learning Methods 45 F. Heiland, J. Schilling, R. Kollert, M. Götz, A. Keller, D. Katava, P. Rettenmeier, M. Werschler, IMS Gear SE & Co. KGaA, Donaueschingen Tooth root carrying capacity Tooth root strength of different quenched and tempered steels for induction-harde...

Schlagworte

Publikation durchsuchen

Bibliographische Angaben

Copyrightjahr
2025
ISBN-Online
978-3-18-102460-7
Verlag
VDI Verlag, Düsseldorf
Reihe
VDI-Berichte
Band
2460
Sprache
Deutsch
Seiten
XXII
Produkttyp
Sammelband

Inhaltsverzeichnis

KapitelSeiten
  1. Titelei/Inhaltsverzeichnis Kein Zugriff I - XX
  2. Foreword Kein Zugriff 1 - 2
    1. Powered by AI – Leading the future of drive technology Kein Zugriff J. Reimann, J. Zundel, T. Sadek
    1. optimization AI/ML-accelerated gear durability analysis within gear design optimization Kein Zugriff M. Vivet, D. Park, A. Scheuer
    1. Early Detection of Critical Operating Conditions in Journal Bearings of Gearboxes Using Acoustic Emission and Machine Learning Kein Zugriff 25 - 44 F. Wirsing, A. Saleh, G. Jacobs, D. Bosse, F. König, B. Lehmann, B. Klinghart
    2. Condition Monitoring and Remaining Useful Lifetime Prediction of a Worm Gear based on Simulative, Lazy Learning, and Deep Learning Methods Kein Zugriff 45 - 58 F. Heiland, J. Schilling, R. Kollert, M. Götz, A. Keller, D. Katava, P. Rettenmeier, M. Werschler
    1. Tooth root strength of different quenched and tempered steels for induction-hardened planetary pinions in wind turbine gearboxes Kein Zugriff S. Hendricks, C. Westphal, M. Davidovic, T. Bergs
    1. Noise Reduction of two-stage Planetary Gear Set based on Multi-body Dynamics and Modal Acoustic Transfer Vector Simulations Kein Zugriff D. J. Min, H. Yoo
    1. Size influence on tooth root strength based on testing and simulation Kein Zugriff J. Meis, N. Lukaschik
    1. Virtual Optimization of Gearbox Oiling – How Reliable are the Results? Kein Zugriff 105 - 114 M. Reichl, K. Schierl
    2. Detailed and efficient transient simulations of wave gears Kein Zugriff 115 - 122 H. Grillenberger, H. Golbach, M. Kittsteiner, V. Makhavikou, L. Ronchiato, R. G. Parker
    1. Efficient simulation procedure for NVH evaluation of bevel gear sets Kein Zugriff 123 - 132 F. Rudolph, J. Kunert
    2. Frequency Response Analysis of Drivetrains based on an Iterative Approach for Efficient Prediction of System Responses Kein Zugriff 133 - 146 S. Ebrahimi, S. Beermann, A. Möstl
    3. Holistic and statistical approach to the impact of manufacturing deviations on the transmission error, structural vibrations and the acoustic behavior of gearboxes Kein Zugriff 147 - 166 D. Tazir, B. Abert
    1. A New Approach to Friction Calculation of Internal Gears Kein Zugriff 167 - 174 C. Paschold, T. Lohner, K. Stahl
    2. Proposal of Low Friction Loss Gear Surface Based on Correlation Map between Surface Roughness and Friction Coefficient Kein Zugriff 175 - 188 Y. Shishihara, Y. Otaki, H. Maki, A. Hase
    3. Quantitative Analysis of Churning in Dip-Lubricated Gearboxes Through Computer Vision Techniques Kein Zugriff 189 - 206 B. Cardozo, R. Rego, R. Metzger
    1. Electric Impedance-Based Detection of Surface Deviations in Helical Gear Meshes Kein Zugriff 207 - 232 M. Hausmann, E. Kirchner
    2. Gear Damage Detection in Planetary Gearboxes Kein Zugriff 233 - 238 L. Merkle, L. Binanzer, M. Dazer
    1. Micropitting behavior of spur gears in eDrives with a holistic thermal management Kein Zugriff M. Yilmaz, B. Heine, F. Zerulli, J. König, D. Fuchs
    1. Pitting Damage 2D-Position Detection System on Gear Surface using Deep Learning Kein Zugriff C. Zhu, S. Yin, E. Tanaka, K. Osawa, M. Nakasako, K. Ikejo
    1. Meshing performance investigations on a novel pointcontact worm face gear drive based on curve meshing theory – Conference Proceedings Kein Zugriff C. Dou, Y. Chen, J. Gao, W. Luo, B. Chen
    1. Consideration on Lubrication of High-Speed Rotating Gear (Second Report) Case Study of Efficient Tooth Surface Lubrication Method Kein Zugriff 275 - 282 M. Ohno, K. Suzuki, T. Hara, K. Sakai, K. Sakai, J. Yamada
    2. Metallocene Polyalphaolefin (PAO) base stock technology reduces friction, heat generation and increases efficiency in industrial gear applications Kein Zugriff 283 - 286 S. Meinhardt, L. Bunting, M. Fedotov, E Geist
    1. Microgeometry optimization of an E-Drive Unit using system level multibody simulation for best NVH performance while mitigating the impact of manufacturing errors Kein Zugriff 287 - 302 J. Verhoogen, D. Park, H. Xu, H.Y.I. Du, B. Li
    2. Advancing Electric Powertrain NVH Design Through Transmission Error Correlation Kein Zugriff 303 - 318 S. Magne, X. Hauvette, B. Ravichandran, B. Charles
    1. Automation of high power density gearbox design encompassing layshaft and planetary gear train layouts across a wide range of operating conditions Kein Zugriff 319 - 334 D. Park, A. Rezayat, Y. Gwon, S. Popescu
    2. Automated Transmission Design – Product Development Process for Industrial Transmissions! Kein Zugriff 335 - 344 M. Heider, M. Fromberger, R. Hafner
    1. A study on the crack propagation in the tooth root and its consequences on the tooth root fracture lifetime Kein Zugriff 345 - 360 L. Valsecchi, L. Bonaiti, S. Sartori, U. Mariani, C. Gorla
    2. Simulative evaluation of heat transfer and surface temperature distribution of an industrial gear unit Kein Zugriff 361 - 380 C. Kunik, C. Nau, T. Goldschmidt
    3. Research on the Dynamic Characteristics of High-speed Thin-rimmed Gear Transmission Considering the Elastohydrodynamic Lubrication Contact Kein Zugriff 381 - 390 J. Zheng, D. Qin, C. Liu, J. Zhang
    1. Research on vibration characteristics of gear systems with surface waviness based on LTCA method Kein Zugriff 391 - 406 Wang, Li
    2. Nonlinear Dynamic Analysis of Herringbone Gears Under Time-Varying Backlash and Double-Sided Meshing Impact: A Theoretical and Experimental Study Kein Zugriff 407 - 422 F.F. Liu, G. Liu, L. Liu
    1. World‘s most powerful gearbox with 47 MNm output torque Model-based design of a multi-motor drive and compensation of the effects of low natural frequencies and gear backlash Kein Zugriff 423 - 432 F. Renger, T. Stöckl
    2. Research on the Loading Rate Dependence of Hysteresis in Small-Size Reducers Kein Zugriff 433 - 446 G. Zuo, H. Cheng, Z. Shi, D. Cao
    1. Investigation and rating of tribological effects on heat dissipation for electric vehicle gearbox Kein Zugriff B. Karba, H. Cavus, U. Ciloglu, E. F. Yildirim
    1. Gear Boxes for Food and Beverage Applications with sintered lubricant bound gears – A ready to go into Production Gear Box Kein Zugriff 467 - 478 S. Vonderschmidt, R. Vonderschmidt
    2. The Effect of Surface Instability on Rolling Contact Fatigue Kein Zugriff 479 - 494 G. M.O. Gomes, N. Souza, R. Rego
    1. Potentials of Enveloping Crossed Helical Gears Kein Zugriff 495 - 508 A. L. Kapelevich, Y. I. Safris, J. Thomas, C. Gosselin, W. Wagner
    2. Tooth contact analysis on differential bevel gears in an elastic environment Kein Zugriff 509 - 522 F. Mieth
    1. A modified Back-to-Back geared Test-Rig for the study of splash and jet lubrication Kein Zugriff 523 - 534 L. Bonaiti, L. Valsecchi, C. Gorla, S. Sartori, L. Alari, P. Pisani, U. Mariani
    2. Approach to determine quantitatively correct loadindependent power losses inside turbo gearboxes by flow simulation Combined meshless and mesh-based flow simulations Kein Zugriff 535 - 544 P. Neuenfeldt, J. Dorffer, A. Steurer, P. Leoni
    3. Gearbox efficiency of eDrives: theoretical influence of the lubricant viscosity, gear loss factor and tooth flank roughness on gearbox power losses Kein Zugriff 545 - 554 M. Yilmaz, M. Ayar, E. Ipek, I. Memet, B. Schwarz, F. Zerulli, J. König
    1. Diagnosing the Defects of the Gears of the Transmission Using Vibration Analysis and Validating it by the Graphs of the HÖFLER Gear Testing Machine Kein Zugriff 555 - 570 A. Mangouri, M. Akbari, S . Atazadeh
    2. Transmission error prediction of gear pair considering constant and variable errors before the assembly line Kein Zugriff 571 - 586 H. Cavus, B. Karba
    3. Transmission error prediction of gear pair considering constant and variable errors before the assembly line Kein Zugriff 587 - 598 H. Cavus, B. Karba
    4. Introduction and investigation of a secondary profile angle on Hirth-Serrations Kein Zugriff 599 - 608 T. Glaser
    5. Tooth form of a face spline based on a sine function Kein Zugriff 609 - 614 T. Glaser
    6. Normal Method for Tooth Surface Generation of Helical Gear Kein Zugriff 615 - 618 L. Jing, X. Zihua
    7. Error analysis for an improved dynamic model of the herringbone gear transmission system with manufacturing and assembly errors Kein Zugriff 619 - 632 Y. Du, B. Yan, L. Liu, H. Zhang, G. Liu
    8. Modulation frequency identification of herringbone gear transmission system based on EEMD signal decomposition and Hilbert transform envelope demodulation: Theoretical and experimental investigation Kein Zugriff 633 - 646 H. Zhang, R. Dai, Y. Du, G. Liu, J. Gong
    9. Development of split gear solution for a hybrid propulsion system in marine application Kein Zugriff 647 - 654 T. Letzner, B. Scheffler, J. Reger, B. Somschor
    10. Improving the Efficiency of a Wind Turbine Gearbox with Modern CFD Methods Kein Zugriff 655 - 666 M. Cardaun, M. Gebhardt
    11. Gear design optimization for a high-power density Electric Drive Unit Planetary architecture with three fixed-axis planetary gears Kein Zugriff 667 - 670 M. Salica, S. Lazzaro, L. Galliano, M. Tessitore
    12. Development of fatigue life prediction model for bearing with combined ball and roller-shaped rolling elements Kein Zugriff 671 - 678 D. Kwon, D. Moon, B. Kim, Y. Park
    13. Effects of Different Manufacturing Processes on Tooth Root Stress Evaluated by a 3D-FE Method Kein Zugriff 679 - 686 H. Cermak, M. Trübswetter
    14. Estimation of Stiffness and Damping Coefficients in Two-Stage Helical Gearbox using Genetic Algorithm and Vibration Measurements Kein Zugriff 687 - 694 D. Moon, B. Kim, D. Kwon, D. Im, Y. Park, D. J. Min
    15. Efficient simulation strategy for predicting wear evolution in spur gears Kein Zugriff 695 - 700 M. García, M. Escalero, A. Fernández del Rincón
    16. Plastic gears with non-constant curvature of the flank line Endurance and load testing: Wear, acoustic and optical evaluation Kein Zugriff 701 - 716 C. Niedermeier, A. Wagner, E. Kirchner
    17. Experimental study on the temperature of POM gear at different load conditions Kein Zugriff 717 - 728 D. Xin, Z. Shi, P. Zhang
    18. Fatigue characterization of POM-C gears on an electrical closed loop test rigs Kein Zugriff 729 - 736 L. Pagliari, A. Dian, F. Concli, R. Longato
    1. An Improved Method for the Prediction of Contact Stress Failure Mode in Polymer Gears Using Finite Element Methods Kein Zugriff 737 - 754 M. Weiss, S. Gill, C. Cholmeley, J. Elmquist
    2. Relationships between design, process trimming and acoustic properties exemplified by a worm gear Kein Zugriff 755 - 768 G. Mauerlechner
    3. Novel methods for the prediction of tooth temperature and contact ratio under load Kein Zugriff 769 - 784 T. Matsumura, K. Mioki, M. Kada, T. Fujita, A. Pogačnik
    1. Different Aspects of Testing Polymer Gears and Their Influence on the Load-Carrying Capacity Kein Zugriff S. Reitschuster, L. Wang, T. Tobie, K. Stahl
    1. Low Cost, high performance & improved sustainability using the example of a small planetary gearbox Kein Zugriff 795 - 806 T. Braun, G. Fuchs
    2. Design and Fabrication of Soft Gears with a Stereolithography 3D Printer Kein Zugriff 807 - 814 K. Osawa, T. Kido, J. Arata, K. Ikejo, A. Ueda, E. Tanaka
    3. Towards the use of ML/DL models for accelerated design of plastic gears and optimized material selection Kein Zugriff 815 - 832 B. Černe, R. Kalister, D. Zorko
    1. Consideration of strain rate dependency of plastics in gear design and materials testing A discussion on the significance of gear testing methods Kein Zugriff 833 - 846 J. Hausmann, W. Kassem, S. Schmidt, O. Koch
    2. Advances in Polyacetal Materials for Gears Fatigue prediction with comparative and simulative approachess Kein Zugriff 847 - 866 P. Leuerer, R. Ratnagiri, A. Lovekar
    1. Wear Resistant PFAS-free Material with High Heat-resistant Polyamide PA9T Kein Zugriff M. Saikusa, T. Shigematsu
    1. System for automated gear wear measurement Kein Zugriff 879 - 888 N. Osolnik, M. Kalin
    2. Predicting abrasive wear of reinforced thermoplastic spur gears Kein Zugriff 889 - 900 B. van Wissen, L. Pastukhov, R. Megens, A. Hasanovic
    3. Analysis of wear emissions in high-performance bio-based epoxy GFRP laminated composite gears Kein Zugriff 901 - 912 A. Durjava
    1. Consideration of the Challenges and Possibilities of Flank Form Modifications on Plastic Gears Kein Zugriff 913 - 926 M. Koop, C. Wirth, C. Kötz, E. Tründelberg
    2. Optimisation of the tooth root fillet of plastic gears Kein Zugriff 927 - 944 Ha. Dennig, S. Düzel, R. Eberlein, S. Winterberg
    1. Viscoelastic material model for a multiphysics simulation of short fibre reinforced plastic gears Kein Zugriff 945 - 958 V. Schröder, O. Koch
    2. Finite Elemente Analysis for microgeometry optimization of spur gears for noise- and fatigue improvement Kein Zugriff 959 - 968 T. Trietz, H. Schneider, A. Horst, J. He
    3. An Automated Process to create Finite Element Meshes of Gearwheels out of Scanned Measurement Data for the Simulation of Gears Kein Zugriff 969 - 978 E. Stoppel, M. Dold, M. Cvartin
    4. Challenges in e-mobility: NVH and roughness Robust product design and process parameters with engineering AI Practical example of NVH/acoustics in e-transmission Kein Zugriff 979 - 986 F. Thurner, P. Stirnweiß
    5. Quiet BEV Gears: Innovative Material and Design Solutionn Kein Zugriff 987 - 998 P. Jonnalagadda, P. Kauffmann, P. de Oliveira Löhrer
    6. Optimizing Gear Microgeometry for E-Mobility: Metrological Requirements and the Need for Revised Specifications Kein Zugriff 999 - 1012 B. Brodmann, M. Wand
    1. Analysis of the influencing variables for tool condition monitoring during gear hobbing Kein Zugriff S. Hendricks, M. Davidovic, T. Bergs
    1. Relevance of case-hardening depth on gear performance, challenges on manufacturing and evaluation of big gears Kein Zugriff 1033 - 1044 A. Okariz, A. Fernández
    2. Combining Photogrammetric Methods with TCA for Enhanced Quality Assurance of Gearboxes Kein Zugriff 1045 - 1058 C. van Oss, M. Hardner, S. Holtzhausen, S. Schumann, B. Schlecht
    1. New Rolling Machine for Large Gear Applications Conference Proceedings Kein Zugriff M. Milbrandt, M. Lahl, U. Hellfritzsch, T. Clausmeyer, V. Kräusel, M. Dix
    1. Fatigue Performance Characterization of Dievar® Gear Teeth Manufactured by Laser-Powder Directed Energy Deposition Kein Zugriff 1077 - 1096 A. Isaacson, M. E. Wagner, C. Wassel, D. Montoya-Zapata, M. Azpaleta
    2. High-Damping Lightweight Binder Jetting Gear Design Kein Zugriff 1097 - 1112 G. Guimarães, M. Fernandes, R. Rego, A. Faria, L. Klee, E. Breuer, C. Westphal, T. Bergs
    1. Cutting method using a scraping-cutter for involute conjugate gears including face gears Kein Zugriff 1113 - 1122 N. Maeda, S. Kurokawa
    2. Feed Rate Improvement for Face-Milled Bevel Gears on a CNC Bevel Gear-Cutting Machine Kein Zugriff 1123 - 1138 Y. Shih, B. Sheen, B. Lee, Y. Lee, K. Chen, J. Hsu, Z. Fong
    1. A manufacturable higher-order tooth flank modification for enhanced bevel gear performance Kein Zugriff E. Grabovic, A. Artoni, M. Gabiccini
    1. Form-irregularity of crater-expression of Debye-ring at Xray diffraction measurement for checking gear steel quality Kein Zugriff 1151 - 1166 A. Kubo, M. Nagae
    2. Eliminating Manufacturing Steps by Alloying Kein Zugriff 1167 - 1178 E. Löthman, P. Ölund, C. Gallo
    3. Numerical prediction of hardness and residual stress in induction hardened 42CrMo4 steel gears Kein Zugriff 1179 - XXII U. Segurajauregi, A. Goñi, M. Areitioaurtena, M.J. Cabello, J.A. Esnaola

Ähnliche Veröffentlichungen

aus den Schlagworten "AI", "Digitalization", "Künstliche Intelligenz"
Cover des Buchs: Künstliche Intelligenz in der Strafrechtspflege
Sammelband Kein Zugriff
Sabine Gless, Dorotea Advesian
Künstliche Intelligenz in der Strafrechtspflege
Cover des Buchs: Gerüche in der Umwelt 2025
Sammelband Kein Zugriff
VDI Wissensforum GmbH
Gerüche in der Umwelt 2025
Cover des Buchs: Sichere Handhabung brennbarer Stäube
Sammelband Kein Zugriff
VDI Wissensforum GmbH
Sichere Handhabung brennbarer Stäube
Cover des Buchs: Schraubenverbindungen 2025
Sammelband Kein Zugriff
VDI Wissensforum GmbH
Schraubenverbindungen 2025
Cover des Buchs: LAND.TECHNIK AgEng 2025
Sammelband Kein Zugriff
VDI Wissensforum GmbH
LAND.TECHNIK AgEng 2025

Hinweis

Dieses Werk ist urheberrechtlich geschützt und darf nur nach den Vorgaben der Nutzungs- und Lizenzvereinbarung genutzt werden. Jede darüber hinaus gehende Nutzung des Werkes ist ausdrücklich untersagt und wird verfolgt.

Feedback geben

Wir freuen uns über Ihr Feedback zu Inhalten und Funktionen. Ihre Nachricht hilft uns, unseren Service stetig zu verbessern.

Bewertung
Bild anhängen
oder hier ablegen
PNG oder JPG (max. 3 MB)

Anmelden

Passwort vergessen?
Login via Open Athens
Noch kein Benutzerkonto?
Jetzt registrieren

Publikation zitieren

Download: RIS BibTex