Article No access Titelei Page 1 - 2 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2019 doi.org/10.37544/1436-4980-2019-10-1
Article No access Der zukünftige Leichtbau qualifiziert besonders die Umformtechnik Page 699 - 700 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2019 Authors: Mathias Liewald doi.org/10.37544/1436-4980-2019-10-3
Article No access Torsionsfestigkeit von umformgefügten Zahnrädern*/Torsional Strength of Multi-Component Gears – static and dynamic torsional strength of gears manufactured by lateral extrusion Page 701 - 708 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2019 Authors: R. Meißner | M. Liewald | C. Leonhardt | M. Otto | K. Stahl doi.org/10.37544/1436-4980-2019-10-5
Article No access Kaltumformung komplexer innenprofilierter Hohlbauteile*/Cold forging of complex inner-profiled hollow components Page 709 - 715 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2019 Authors: N. Missal | M. Liewald | D. Deliktas | H. Venzlaff doi.org/10.37544/1436-4980-2019-10-13
Article No access Analyse dynamischer Niederhalterbelastungen*/Analysis of dynamic part holder loads – Prototype tool for validation of part holder impacts in large forming tools according to production conditions Page 716 - 721 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2019 Authors: M. Liewald | M. Burkart | J. Wied | E. Stockinger doi.org/10.37544/1436-4980-2019-10-20
Article No access Digitalisierte Tragbilder im Werkzeug-Tryout */Digital spotting images as a quantitative criteria for quality evaluation during tryout Page 722 - 726 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2019 Authors: M. Liewald | P. Essig | C. Bolay doi.org/10.37544/1436-4980-2019-10-26
Article No access Leichtbauprofile durch flexibles Rollsicken*/Lightweight profiles by flexible roller beading – A novel forming technology for the production of sheet metal profiles with variable cross-sections Page 727 - 732 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2019 Authors: T. Wang | H. Ye | P. Groche doi.org/10.37544/1436-4980-2019-10-31
Article No access Temperatureinfluss in der Aluminiumblechumformung*/Temperature influence in aluminum sheet metal forming – springback behavior and process limits during V-bending of EN AW-6082 and EN AW-7075 Page 733 - 739 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2019 Authors: T. Suckow | J. Günzel | L. Schell | E. Sellner | J. Dagnew | P. Groche doi.org/10.37544/1436-4980-2019-10-37
Article No access Verzugsarme Kaltmassivumformung*/Low distortion cold massive forming – Development of a new technology for the reduction of residual stresses Page 740 - 744 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2019 Authors: A. Franceschi | P. Groche doi.org/10.37544/1436-4980-2019-10-44
Article No access Maßgeschneiderte Halbzeuge*/Tailored Blanks – Manufacturing of functional parts for the realization of lightweight components Page 745 - 749 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2019 Authors: A. Hetzel | R. Schulte | M. Vogel | J. Degner | M. Merklein doi.org/10.37544/1436-4980-2019-10-49
Article No access Erzeugung duktiler Bereiche beim Formhärten*/Production of ductile areas in hot stamping – Creating areas with reduced strength using a tempering station Page 750 - 754 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2019 Authors: B. Behrens | S. Hübner | S. Yarcu | K. Wölki | H. Maier | O. Golovko | F. Nürnberger doi.org/10.37544/1436-4980-2019-10-54
Article No access Qualität schergeschnittener MKV-Bleche*/Quality of sheared metal-plastic composite sheets. Influence of the cutting parameters on mechanical component properties of metal-plastic composites Page 755 - 764 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2019 Authors: L. Altan | D. Lenz | T. Hasselbusch | J.E. Förster doi.org/10.37544/1436-4980-2019-10-59
Article No access Folgeverbundhybridschmieden eines Querlenkers*/Hybrid forging process within progressive dies of a suspension arm – Lightweight structural construction and heat subjection of hybrid forged parts Page 765 - 769 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2019 Authors: E. Seif | J. Langner | M. Stonis | B. Behrens doi.org/10.37544/1436-4980-2019-10-69
Article No access Verbesserung der Duktilität durch Kornfeinung*/Improvement of ductility by grain refining. Development of an isothermal ECAP tool for forming iron-aluminium alloys Page 770 - 776 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2019 Authors: B.-A. Behrens | R. Relge doi.org/10.37544/1436-4980-2019-10-74
Article No access Erhöhung der Bauteilfestigkeit durch Gradierungspressen/Increase of component strength by gradation extrusion Page 777 - 778 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2019 Authors: R. Selbmann doi.org/10.37544/1436-4980-2019-10-81
Article No access Industrie 4.0 in praxisnaher Anwendung*/Industry 4.0 in practical application - From retrofit to data storage to machine learning using glass forming as an example Page 779 - 784 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2019 Authors: H. Mende | P. Vogel | M. Padrón Hinrichs | R. Schmitt doi.org/10.37544/1436-4980-2019-10-83
Article No access Methoden zur produktfunktionsgeregelten Fertigung von Composite-Bauteilen/Methods for product function controlled manufacturing of composite components – Hybrid component manufacturing with chained forward control loop Page 785 - 792 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2019 Authors: C. Hopmann | S. Stender | N. Magura | M. Emonts | K. Fischer | D. Schneider doi.org/10.37544/1436-4980-2019-10-89
Article No access Energieeffizienz durch Oberschwingungsreduzierung*/Energy efficiency through harmonic distortion reduction – Harmonics-minimized control strategy in production machines Page 793 - 800 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2019 Authors: S. Ju | N. Hanenkamp doi.org/10.37544/1436-4980-2019-10-97