Commentary to EN 1992-4 - Design for Fastenings for use in Concrete: Hinweise für die Verwendung von Zement zu Beton, Grundlagen für die Neuregelung zur B…

Deutscher Ausschuss für Stahlbeton e._V.

doi:10.5771/9783410658245

Search publication

Bibliographic data

Edition: 1/2019
Copyright Year: 2019
ISBN-Print: 978-3-410-65823-8
ISBN-Online: 978-3-410-65824-5
Publisher: DIN Media, Berlin
Series: DAfStb-Heft
Language: English
Pages: 251
Product Type: Edited Book

1. Contents No access
2. Foreword No access
1. 1. Re 1.1 General No access
  2. Re 1.2 Type of fasteners and fastening groups No access
  3. Re 1.3 Fastener dimensions and materials No access
  4. Re 1.4 Fastener loading No access
  5. Re 1.5 Concrete strength and type No access
  6. Re 1.6 Concrete member loading No access
2. Re 2 Normative references No access
3. 1. Re 3.1 Terms and definitions No access
4. 1. Re 4.1 General No access
  2. Re 4.2 Required verifications No access
  3. Re 4.4 Verification by the partial factor method No access
  4. Re 4.7 Determination of concrete condition No access
5. Re 5 Durability No access
6. 1. Re 6.1 General No access
  2. Re 6.2 Headed fasteners and post-installed fasteners No access
  3. Re 6.3 Anchor channels No access
  4. Re 6.4 Forces assigned to supplementary reinforcement No access
7. 1. Re 7.1 General No access
  2. Re 7.2 Headed and post-installed fasteners No access
  3. Re 7.3 Fasteners in redundant non-structural systems No access
  4. Re 7.4 Anchor channels No access
8. 1. Re 8.1 General No access
  2. Re 8.3 Resistance No access
9. 1. Re 9.2 Requirements No access
10. Re 10 Verification for fire resistance No access
11. Re 11 Verification of serviceability limit state No access
12. 1. 1. Re A.1 General No access
    2. Re A.2 Verification of the shear resistance of the concrete member No access
  2. 1. Re B.1 General No access
  3. 1. Re C.2 Performance categories No access
    2. Re C.3 Design criteria No access
    3. Re C.4 Derivation of forces acting on fasteners – analysis No access
    4. Re C.5 Resistance No access
  4. 1. Re D.1 General No access
  5. Re Annex E – Characteristics for the design of fastenings to be provided byEuropean Technical Product Specification No access
  6. 1. Re F.2 Post-installed fasteners No access
  7. 1. Re G.1 General No access
    2. Re G.2 Method B No access
    3. Re G.3 Method C No access
1. 1. Re 1 Scope No access
2. 1. Re 4.1 General No access
  2. Re 4.2 Attached element No access
  3. Re 4.5 Verification No access
3. 1. Re 1 Scope No access
  2. Re 6 Derivation of forces acting on anchor channels – Analysis No access
  3. Re 7 Verification of ultimate limit state No access
  4. Re 8 Improved model for the design of anchor channels close to an edgesubjected to a shear load transverse to the longitudinal channel axiswith supplementary reinforcement No access
  5. Re 9 Verification of serviceability limit state No access
4. 1. Re 1 Scope No access
  2. Re 4 Field of application No access
  3. Re 5 Loads on fastenings No access
  4. Re 6 Design of fastenings No access
  5. Standards and codes cited in Parts 1 and 2 No access
  6. DAfStb bulletins (German Committee for Structural Concrete) No access
  7. References in Parts 1 and 2 No access
  8. 1. 2 Lifting inserts No access
    2. 3 Design provisions No access
    3. 4 Conclusions No access
    4. 5 References No access
5. General No access
1. 1 Introduction No access
2. 2 Distribution of shear loads [6] No access
3. 3 Distribution of shear loads – an alternative approach [10] No access
4. 4 Assumptions for serviceability limit state No access
5. 5 Summary No access
6. 6 References No access
1. 1 Introduction No access
2. 2 Connectors in multilayer wall panels No access
3. 3 Loads on sandwich wall panels No access
4. 4 General structural behaviour of sandwich wall panels No access
5. 5 Required verification No access
1. 1 Introduction No access
2. 2 Sandwich panels No access
3. 3 Fastening of Precast Suspended Façades No access
4. 4 References No access
1. 1 Introduction No access
2. 2 Grout-in anchors No access
3. 3 Grout No access
4. 4 Design No access
5. 5 Summary No access
6. 6 References No access
1. 1 Introduction No access
2. 2 Fastenings with a mortar layer No access
3. 3 Summary of the state of the art No access
4. 4 Engineering approach for fastenings with lever arm No access
5. 5 Design of fastenings with lever arm No access
6. 6 Design examples No access
7. 7 Summary No access
8. 8 References No access
1. 1 Introduction No access
2. 2 Functioning principle and design format No access
3. 3 Recommendations for the reinforcement arrangement No access
4. 4 When is a supplementary reinforcement useful? No access
5. 5 Further provisions for headed studs No access
6. 6 Summary No access
7. 7 References No access
1. 1 Introduction No access
2. 2 Fastenings at an edge with anchor reinforcement No access
3. 3 Design models No access
4. 4 Open topics No access
5. 5 Summary No access
6. 6 References No access
1. 1 Introduction No access
2. 2 Failure mode splitting of fastenings No access
3. 3 Fastening systems No access
4. 4 Information on design according EN 1992-4 No access
5. 5 Investigations and further design models No access
6. 6 International Regulations No access
7. 7 Summary No access
8. 8 References No access
1. 1 Introduction No access
2. 2 Design approaches for concrete edge failure No access
3. 3 Example calculations No access
4. 4 Summary No access
5. 5 References No access
1. 1 General No access
2. 2 Performance categories C1 and C2 according to EOTA TR 049 No access
3. 3 Design of connections under seismic actions No access
4. 4 Displacements of fastening elements No access
5. 5 References No access
1. 1 Introduction No access
2. 2 Material properties in case of fire No access
3. 3 Temperature load No access
4. 4 Characteristic resistance to fire No access
5. 5 References No access
Verzeichnis der in der Schriftenreihe des Deutschen Ausschussesfür Stahlbeton – DAfStb – seit 1945 erschienenen Hefte No access Pages 233 - 248