
Influence of elevated temperatures up to 100 C on the mechanical properties of concrete
Ringversuch zur Ermittlung des Chlorideindringwiderstands von Mörtel und Beton- Herausgeber:innen:
- Reihe:
- DAfStb-Heft
- Verlag:
- 2022
Zusammenfassung
Experiments aiming at characterizing the effects of moisture content and temperature on the mechanical properties of concrete were conducted. Based on the results of the experiments, theoretical formulations were proposed and a new overall material model capable of predicting the mechanical behaviour of concrete subject to elevated temperatures up to 100 C was developed. The new material model estimates the time, temperature and moisture dependency of the compressive strength, tensile strength, modulus of elasticity, creep and shrinkage of concrete. Consequently, this book provides specific knowledge about the influences of elevated temperatures and moisture content on the mechanical behaviour of concrete as well as a tool to calculate these influences. This shall contribute to the field of investigation of estimating the structural safety under ordinary and extraordinary loadings as well as to the area of evaluating the service life of concrete structures.
Publikation durchsuchen
Bibliographische Angaben
- Auflage
- 1/2022
- Copyrightjahr
- 2022
- ISBN-Print
- 978-3-410-65877-1
- ISBN-Online
- 978-3-410-65878-8
- Verlag
- DIN Media, Berlin
- Reihe
- DAfStb-Heft
- Sprache
- Englisch
- Seiten
- 205
- Produkttyp
- Sammelband
Inhaltsverzeichnis
- Preface Kein Zugriff
- Contents Kein Zugriff
- Notation Kein Zugriff
- Problem statement and objectives of the investigation Kein Zugriff
- Structure of the document Kein Zugriff
- Structure of hardened Portland cement paste Kein Zugriff
- Moisture storage in the concrete microstructure Kein Zugriff
- Hydrothermal effects on the microstructure of concrete Kein Zugriff
- Associated mechanisms Kein Zugriff
- Describing moisture transport in porous materials Kein Zugriff
- Description of concrete drying based on diffusion Kein Zugriff
- Experimental investigations on concrete submitted to elevated temperatures below 100°C Kein Zugriff
- Theoretical approaches towards the conception of an experimental program Kein Zugriff
- Summary Kein Zugriff
- Source Materials Kein Zugriff
- Mixtures Kein Zugriff
- Production scheme Kein Zugriff
- Conditioning of the samples Kein Zugriff
- Determination of the relative humidity and water content Kein Zugriff
- Evaluation of the concrete microstructure Kein Zugriff
- Determination of strength and stiffness Kein Zugriff
- Determination of creep and shrinkage Kein Zugriff
- Summary Kein Zugriff
- Concretes drying at room temperature Kein Zugriff
- Concretes drying at elevated temperatures Kein Zugriff
- Temperature changes Kein Zugriff
- Mercury intrusion porosimetry Kein Zugriff
- Gas permeability Kein Zugriff
- Compressive strength Kein Zugriff
- Tensile strength Kein Zugriff
- Modulus of elasticity Kein Zugriff
- Influence of water content Kein Zugriff
- Influence of concrete microstructure Kein Zugriff
- Influence of concrete temperature Kein Zugriff
- Summary and conclusions Kein Zugriff
- Effects of drying Kein Zugriff
- Combined effects of temperature and moisture content Kein Zugriff
- Reference temperature Kein Zugriff
- Elevated temperatures Kein Zugriff
- Summary and conclusions Kein Zugriff
- Drying at reference temperature Kein Zugriff
- Drying at elevated temperatures Kein Zugriff
- Effect of temperature changes Kein Zugriff
- Assumptions Kein Zugriff
- Implementation Kein Zugriff
- Coverage and capabilities Kein Zugriff
- Comparing the model results with measurements Kein Zugriff
- Summary and conclusions Kein Zugriff
- Main findings of the thesis Kein Zugriff
- Open questions Kein Zugriff
- Wesentliche Ergebnisse und Erkenntnisse Kein Zugriff
- Offene Fragen Kein Zugriff
- Bibliography Kein Zugriff Seiten 110 - 117
- Codes and Guidelines Kein Zugriff Seiten 118 - 119
- Appendix Kein Zugriff Seiten 120 - 202





