Article No access Effektive Analyse von Werkzeugmaschinenkalibrierdaten*/Effective analysis of machine tool calibration data. VoluSoft as a showcase for user-friendly visualization and processing of machine tool calibration data Volume 108 (2018), Issue 11-12 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: R. Schmitt | P. Dahlem | B. Montavon DOI: 10.37544/1436-4980-2018-11-12-15
Article No access Einfluss des Tiefbohrens auf die Schwingfestigkeit*/Influence of deep hole drilling on the fatigue resistance of components made of quenched and tempered steel 42CrMo4+QT (AISI 4140) Volume 108 (2018), Issue 11-12 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: F. Walther | D. Biermann | N. Baak | J. Nickel DOI: 10.37544/1436-4980-2018-11-12-27
Article No access FTS-Diamantdrehen strukturierter Oberflächen*/FTS diamond turning of structured surfaces Volume 108 (2018), Issue 11-12 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: R. Bergmann | C. Falldorf | F. Thiemicke | E. Brinksmeier | O. Riemer | A, Holthusen DOI: 10.37544/1436-4980-2018-11-12-44
Article No access Ganzheitliche Betrachtung der Produktionsprozesse ermöglicht Leistungssteigerung Volume 108 (2018), Issue 11-12 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: G. Lanza DOI: 10.37544/1436-4980-2018-11-12-3
Article No access Gratbeherrschung an Bohrungsverschneidungen*/Burr formation control in intersecting holes – Evaluation of the potential of using a backup-material for the reduction of burr formation Volume 108 (2018), Issue 11-12 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: A. Weber | F. Sousa | T. Hielscher DOI: 10.37544/1436-4980-2018-11-12-38
Article No access IHU-Werkzeugkonzept für einfach wirkende Pressen*/Hydroforming tool concept for single acting press – Elastomer as an alternative pressure medium for forming of thick-walled cups Volume 108 (2018), Issue 11-12 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: T. Bergs | A. Feuerhack | D. Trauth | R. Hild | H. Voigts DOI: 10.37544/1436-4980-2018-11-12-62
Article No access Laserstrukturierung auf Flugzeugoberflächen Volume 108 (2018), Issue 11-12 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: T. Kunze DOI: 10.37544/1436-4980-2018-11-12-54
Article No access Laufbahn-Finish durch Kurzhub-Formhonen*/Surface finish by short-stroke form honing with piezo actuators Volume 108 (2018), Issue 11-12 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: M. Ullrich | W. Drossel | B. Genz | H. Goldau DOI: 10.37544/1436-4980-2018-11-12-50
Article No access Metamodellbasierte Technologieplanung*/Metamodel-based technology planning – Generation of cross-technology metamodels for the holistic optimization of process sequences Volume 108 (2018), Issue 11-12 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: T. Bergs | D. Trauth | J. Rey | A. Beckers DOI: 10.37544/1436-4980-2018-11-12-89
Article No access Mikrofräswerkzeuge mit Schneiden aus cBN*/Micro-cutting tools with cBN cutters Volume 108 (2018), Issue 11-12 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: M. Polte | H. Wiesner | Y. Kuche | J. Polte | E. Uhlmann DOI: 10.37544/1436-4980-2018-11-12-33
Article No access Modulare Rolle-zu-Rolle Produktionsplattform mit integriertem Mikro-3D-Druck-System/Modular Roll-to-Roll production platform with integrated micro-3D-printing system – Cost efficient production of microfluidic systems Volume 108 (2018), Issue 11-12 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: H. Bohlmann | R. Götzen | J. Götzen | B. Puerto | D. González | P. Sánchez-Friera DOI: 10.37544/1436-4980-2018-11-12-68
Article No access Oberflächengüte additiv gefertigter Kupferbauteile*/Surface quality of additive copper alloy parts – Investigations to increase the surface quality of top and side faces of SLM-generated CuCr1Zr copper alloy parts Volume 108 (2018), Issue 11-12 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: V. Kashevko | E. Uhlmann DOI: 10.37544/1436-4980-2018-11-12-75
Article No access Optische Schmelzbadüberwachung*/Optical monitoring of the melting bath in an Al-melting furnace Volume 108 (2018), Issue 11-12 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: M. Stonis | J. Langner | S. Mohammadifard | S. Sauke | B. Behrens | H. Larki Harchegani DOI: 10.37544/1436-4980-2018-11-12-20
Article No access Titelei Volume 108 (2018), Issue 11-12 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 DOI: 10.37544/1436-4980-2018-11-12-1
Article No access Verschleiß von Raunormalen*/Wear of roughness material measures – experimental study of the influence of tactile sampling Volume 108 (2018), Issue 11-12 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: S. Feifel | J. Aurich | J. Seewig | B. Kirsch | R. Volk | K. Klauer | M. Eifler DOI: 10.37544/1436-4980-2018-11-12-9
Article No access Zeit- und kostenoptimierter Serienanlauf von Werkzeugen*/Time- and cost-optimized ramp-up of series production tools – Digital process support for reducing the effort and cycle time of correction loops Volume 108 (2018), Issue 11-12 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: J. Wiese | F. Stracke | C. Kelzenberg | G. Schuh DOI: 10.37544/1436-4980-2018-11-12-56
Article No access Volume 108 (2018), Issue 10 Volume 108 (2018), Issue 10 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 DOI: 10.37544/1436-4980-2018-10-36
Article No access Blechkomponenten aus hochfestem Aluminium*/Sheet metal components made of high-strength aluminium Volume 108 (2018), Issue 10 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: P. Groche | J. Günzel | T. Suckow DOI: 10.37544/1436-4980-2018-10-3
Article No access Drehen von ausferritischem Gusseisen*/Turning of austempered ductile iron – Impact of inhomogeneous cutting edge geometry on wear mechanism and machining result Volume 108 (2018), Issue 10 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: J. Hartig | B. Kirsch | J. Aurich DOI: 10.37544/1436-4980-2018-10-100
Article No access Einsatz von CFK-Komponenten in Werkzeugmaschinen*/Design of a gantry machine tool’s slide made of CFRP Volume 108 (2018), Issue 10 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: E. Abele | F. Ali | A. Bretz | I. Lorenz | F. Schulte | A. Sperling | B. Tichi DOI: 10.37544/1436-4980-2018-10-82
Article No access Energieeffizienz von Umformmaschinen*/Energy efficiency of forming machines – Method for determining the efficiency maps of forming machines Volume 108 (2018), Issue 10 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: R. Krimm | B.-A. Behrens | J. Koß DOI: 10.37544/1436-4980-2018-10-10
Article No access Funktionsintegration in der Warmblechumformung*/Function integration in hot stamping. Insertion of functional elements during the hot stamping process Volume 108 (2018), Issue 10 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: B.-A. Behrens | S. Hübner | A. Neumann | H. Vogt | G. Meschut | S. Meyer DOI: 10.37544/1436-4980-2018-10-38
Article No access Hybride Lagerbuchsen aus Aluminium und Stahl*/Numerical process design for the production of a hybrid bearing bushing made of aluminium and steel Volume 108 (2018), Issue 10 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: T. Matthias | A. Chugreev | B. Behrens DOI: 10.37544/1436-4980-2018-10-55
Article No access Hybride Leichtbaustrukturen umformtechnisch gefügt*/Hybrid lightweight structures joined by forming – Potential and limits of hybrid load-bearing structures made of sheet metals and FRP Volume 108 (2018), Issue 10 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: P. Groche | H. Husmann | S. Köhler DOI: 10.37544/1436-4980-2018-10-32
Article No access Inkrementelle Blechmassivumformung*/Incremental Sheet-Bulk Metal Forming – Overview on the development of a new flexible forming technology Volume 108 (2018), Issue 10 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: P. Sieczkarek | S. Wernicke | M. Hahn | S. Gies | A. E. Tekkaya DOI: 10.37544/1436-4980-2018-10-43
Article No access Materialhybride – Verbindung von Kunststoffen und Metallen Volume 108 (2018), Issue 10 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: D. Spancken DOI: 10.37544/1436-4980-2018-10-80
Article No access Nachhaltige Blechumformung durch Trockentiefziehen/Dry deep drawing for sustainability in stamping plants Volume 108 (2018), Issue 10 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: K. Krachenfels | J. Tenner | M. Merklein DOI: 10.37544/1436-4980-2018-10-16
Article No access Nachhaltigkeit durch moderne Umformtechnik Volume 108 (2018), Issue 10 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: P. Groche DOI: 10.37544/1436-4980-2018-10-2
Article No access Neue Anwendungen für das Innenhochdruckumformen/Increasing the applicability of internal high pressure forming – A smart concept to sustainably improve market access for SME for internal high pressure forming Volume 108 (2018), Issue 10 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: T. Burkhardt | S. Liebl | K. Massalsky | R. Riedel | N. Göhlert | P. Wilsky | R. Prielipp DOI: 10.37544/1436-4980-2018-10-62
Article No access Pulvermetallurgie und Verbundschmieden*/Powder metallurgy and compound forging - Thermal process route for evaluating the influence of alloying elements on the bonding strength of hybrid components Volume 108 (2018), Issue 10 VDI Fachmedien GmbH & Co. KG, Düsseldorf 2018 Authors: B. Behrens | P. Kuwert DOI: 10.37544/1436-4980-2018-10-50