Neural Radiance Fields in der Fabrikplanung/On the applicability of Neural Radiance Fields for virtual model reconstruction in factory planning

Table of contents

Bibliographic information

Cover of Volume: wt Werkstattstechnik online Volume 113 (2023), Edition 06
Open Access Full access

wt Werkstattstechnik online

Volume 113 (2023), Edition 06

Authors:
Publisher
VDI fachmedien, Düsseldorf
Copyright year
2023
ISSN-Online
1436-4980
ISSN-Print
1436-4980

Chapter information

Open Access Full access

Volume 113 (2023), Edition 06

Neural Radiance Fields in der Fabrikplanung/On the applicability of Neural Radiance Fields for virtual model reconstruction in factory planning

Authors:
ISSN-Print
1436-4980
ISSN-Online
1436-4980
Preview:

Bibliography

  1. [1] Warnecke, H. J.; Eyerer, P.: Nachhaltige Entwicklung beim Produzieren und Konsum von Produkten. Karlsruhe: DWS Werbeagentur und Verlag 1997 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-6
  2. [2] Eigner, M.; Stelzer, R.: Product Lifecycle Management. Ein Leitfaden für Product Development und Life Cycle Management. Dordrecht: Springer 2013 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-6
  3. [3] United Nations: Transforming our World: The 2030 Agenda for sustainable development. Proceedings of the United Nations. Stand: 2015. Internet: sustainabledevelopment.un.org/content/documents/21252030%20Agenda%20for%20Sustainable%20Development%20web.pdf: Zugriff am 15.06.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-6
  4. [4] Bundestag, D.: Abschlußbericht “Konzept Nachhaltigkeit — Vom Leitbild zur Umsetzung”. Umweltwissenschaften und Schadstoff-Forschung 10 (1998) 4, S. 244 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-6
  5. [5] PBnE: Positionspapier – Nachhaltigkeit ‚made in Germany‘ – Chancen und Herausforderungen für nachhaltig wirtschaftende Unternehmen. Internet: www.bundestag.de/resource/blob/798132/fd385e58b3f5aca186ed5f3f8401fb05/positionspapier- made-in-Germany-data.pdf. Zugriff am 15.06.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-6
  6. [6] Laurent, A.; Molin, C.; Owsianiak, M. et al.: The role of life cycle engineering (LCE) in meeting the sustainable development goals – report from a consultation of LCE experts. Journal of Cleaner Production 230 (2019), pp. 378–382 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-6
  7. [7] Yang, L.; Cormican, K.: The Crossovers and Connectivity between Systems Engineering and the Sustainable Development Goals: A Scoping Study. Sustainability 13 (2021) 6, pp. 3176 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-6
  8. [8] European Commission: A European Green Deal. Striving to be the first climate-neutral continent. Internet: https://commission.europa.eu/ strategy-and-policy/priorities-2019–2024/european-green-deal_de. Zugriff am 15.06.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-6
  9. [9] European Commission: On making sustainable products the norm. Internet: https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX%3A52022DC0140&qid=1649112555090. Zugriff am 15.06.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-6
  10. [10] Europäische Kommission: Änderung unserer Produktions- und Verbrauchsmuster. neuer Aktionsplan für Kreislaufwirtschaft ebnet Weg zu klimaneutraler und wettbewerbsfähiger Wirtschaft mit mündigen Verbrauchern. Internet: www.ihk-arnsberg.de/upload/EU_Kreislaufwirtschaft_Green_Deal_37511.pdf. Zugriff am 15.06.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-6
  11. [11] European Commission: A new Circular Economy Action Plan. For a cleaner and more competitive Europe. Internet: eur-lex.europa.eu/legal-content/EN/TXT/?qid=1583933814386&uri=COM:2020:98:FIN. Zugriff am 15.06.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-6
  12. [12] Bundesministerium für Umwelt, Naturschutz, nukleare Sicherheit und Verbraucherschutz: Eckpunkte der Novellierung des Kreislaufwirtschaftsgesetzes (KrWG). Internet: www.bmuv.de/themen/wasser-ressourcen-abfall/kreislaufwirtschaft/abfallpolitik/uebersicht-kreislaufwirtschaftsgesetz/eckpunkte-der-novellierung-des-kreislaufwirtschaftsgesetzes-krwg. Zugriff am 15.06.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-6
  13. [13] Ellen MacArthur Foundation: Towards a circular economy: business rationale for an accelerated transition. Internet: ellenmacarthurfoundation.org/towards-a-circular-economy-business-rationale-for-an-accelerated-transition. Zugriff am 15.06.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-6
  14. [14] Incose: Systems Engineering Vision 2035. Engineering Solutions for a better World. Internet: www.incose.org/about-systems-engineering/se-vision-2035. Zugriff am 15.06.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-6
  15. [15] Dumitrescu, R.; Albers, A.; Riedel, O. et al.: Engineering in Deutschland ‐ Status quo in Wirtschaft und Wissenschaft: Ein Beitrag zum Advanced Systems Engineering. Stand: 2021. Internet: www.acatech.de/publikation/engineering-in-deutschland/download-pdf?lang=de. Zugriff am 15.06.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-6
  16. [16] Incose: SE Vision 2035. Internet: www.incose.org/products-and-publications/se-vision-2025. Zugriff am 30.06.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-6
  17. [17] Friedenthal, S.; Moore, A.; Steiner, R.: A Practical Guide to SysML: The Systems Modeling Language. San Francisco, CA/USA: Morgan Kaufmann Publishers Inc 2014 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-6
  18. [18] Schneider, B.; Riedel, O.; Bauer, W.: Review: Model-based Systems Engineering and Artificial Intelligence for Engineering of Sustainable Systems – What contribution can systems engineering and artificial intelligence provide for the engineering of sustainable systems as of today? In: Plapper, P. (Hrsg.): Digitization of the work environment for sustainable production. GITO Verlag 2022, pp. 37–59 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-6
  19. [19] Fraunhofer IAO: Lebenszyklusorientierte Entwicklung von Fahrzeug-Komponenten. Fraunhofer IAO und Partner entwickeln modellbasiertes Tool für kreislauffähige Automobilentwicklung. Internet: www.iao.fraunhofer.de/de/presse-und-medien/aktuelles/lebenszyklusorientierte-entwicklung-von-fahrzeug-komponenten.html. Zugriff am 15.06.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-6
  20. [20] Potting, J.; Hekkert, M. P.; Worrell, E. et al.: Circular Economy: Measuring innovation in the product chain. The Hague: PBL Netherlands Assessment Agency 2017 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-6
  21. [21] Block, L.; Werner, M.; Spindler, H. et al.: A variability model for individual life cycle paths in life cycle engineering. In: Dröder, K., Vietor, T. (eds): Future Automotive Production Conference 2022. Zukunftstechnologien für den multifunktionalen Leichtbau. Wiesbaden: Springer Vieweg 2022 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-6
  22. [22] Schneider, B.; Schüle, S.; Kürümlüoglu, M. et al.: Mobiles Plug-In Labor. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb 116 (2021) 1–2, S. 75–81 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-6
  23. [23] Schneider, B.; Schüle, S.; Kürümlüoglu, M. M. et al.: Praxisorientierter Technologietransfer für ASE. wt Werkstattstechnik online 112 (2022) 6, S. 390–394, Internet: www.werkstattstechnik.de. Düsseldorf: VDI Fachmedien Open Google Scholar doi.org/10.37544/1436-4980-2023-06-6
  24. [1] Zhang, K.; Riegler, G.; Snavely, N. et al.: NeRF++: Analyzing and Improving Neural Radiance Fields. arXiv:2010.07492v2 [cs.CV] (2020), doi.org/10.48550/arXiv.2010.07492 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-11
  25. [2] Gao, X.; Zhong, C.; Xiang, J. et al.: Reconstructing Personalized Semantic Facial NeRF Models from Monocular Video. ACM Transactions on Graphics 41 (2022) 6, pp. 1–12 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-11
  26. [3] Zimny, D.; Trzcińnski, T.; Spurek, P.: Points2NeRF: Generating Neural Radiance Fields from 3D point cloud. arXiv:2206.01290 [cs.CV] (2022), doi.org/10.48550/arXiv.2206.01290 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-11
  27. [4] Malamas, E. N.; Petrakis, E. G.; Zervakis, M. et al.: A survey on industrial vision systems, applications and tools. Image and Vision Computing 21 (2003) 2, pp. 171–188 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-11
  28. [5] Denkena, B.; Dittrich, M.-A.; Stobrawa, S.: Automated generation of a digital twin using scan and object detection for data acquisition. Simulation in Produktion und Logistik (2019), pp. 49–60 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-11
  29. [6] Gong, L.; Berglund, J.; Fast-Berglund, Å. et al.: Development of virtual reality support to factory layout planning. International Journal on Interactive Design and Manufacturing 13 (2019) 3, pp. 935–945 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-11
  30. [7] Sommer, M.; Seiffert, K.: Scan methods and tools for reconstruction of built environments as basis for digital twins. In: Stjepandićc, J., Sommer, M., Denkena, B. (eds): DigiTwin: An Approach for Production Process Optimization in a Built Environment. Springer Series in Advanced Manufacturing. Cham: Springer. 2022, pp. 51--77 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-11
  31. [8] Mildenhall, B.; Srinivasan, P. P.; Tancik, M. et al.: NeRF: Representing Scenes as Neural Radiance Fields for View Synthesis. Communications of the ACM 65 (2022) 1, pp. 99–106 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-11
  32. [9] Schonberger, J. L.; Frahm, J.-M.: Structure-from-Motion Revisited. 2016 IEEE Conference on Computer Vision and Pattern Recognition (CVPR), Las Vegas, NV, USA, 2016, pp. 4104–4113 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-11
  33. [10] Fischler, M.; Bolles, R.: Random sample consensus: a paradigm for model fitting with applications to image analysis and automated cartography. Communications of the ACM 24 (1981) 6, pp. 381–395 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-11
  34. [1] Schuh, G.; Prote, J.-P.; Luckert, M. et al.: Automatisierung in der Arbeitsplanung. Zeitschrift für wirtschaftlichen Fabrikbetrieb 112 (2017) 12, S. 827–830 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-16
  35. [2] Natarajan, K.; Gokulachandran, J.: Application of artificial neural network techniques in computer aided process planning-a review. International Journal of Process Management and Benchmarking 11 (2021) 1, pp. 80–100 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-16
  36. [3] Tercan, H.; Guajardo, A.; Meisen, T.: Industrial Transfer Learning: Boosting Machine Learning in Production. 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), Helsinki, Finland, 2019, pp. 274–279, doi: 10.1109/INDIN41052.2019.8972099 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-16
  37. [4] Torrey, L.; Shavlik, J.: Transfer Learning. In: Olivas, E. S.; Guerrero, J. D. M.; Martinez-Sober, M. (eds): Handbook of research on machine learning applications and trends: algorithms, methods, and techniques. New York: IGI Global 2009, pp. 242–264 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-16
  38. [5] Ruediger-Flore, P.; Glatt, M.; Hussong, M. et al.: CAD-based data augmentation and transfer learning empowers part classification in manufacturing. The International Journal of Advanced Manufacturing Technology 125 (2023) 11–12, pp. 5605–5618 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-16
  39. [6] Zhuang, F.; Qi, Z.; Duan, K. et al.: A Comprehensive Survey on Transfer Learning. Journal of Big Data 3 (2020) 1, pp. 1–40 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-16
  40. [7] Eversheim, W.: Organisation in der Produktionstechnik Heidelberg: Springer 2002 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-16
  41. [8] Wiendahl, H.-P.; Wiendahl, H.-H.: Betriebsorganisation für Ingenieure. München: Carl Hanser Verlag 2019 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-16
  42. [9] Al-wswasi, M.; Ivanov, A.; Makatsoris, H.: A survey on smart automated computer-aided process planning (ACAPP) techniques. The International Journal of Advanced Manufacturing Technology 97 (2018) 1–4, pp. 809–832 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-16
  43. [10] Sager, C.; Zschech, P.; Kühl, N.: labelCloud: A lightweight domain-independent labeling tool for 3D object detection in point clouds. arXiv preprint arXiv:2103.04970 (2021), doi.org/10.48550/arXiv.2103.04970 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-16
  44. [11] Kamal, N. S.; Barathi Ganesh, H. B.; Sajith Variyar, V. V. et al.: Geometry Based Machining Feature Retrieval with Inductive Transfer Learning. Intelligent Data Engineering and Analytics: Proceedings of the 9th International Conference on Frontiers in Intelligent Computing: Theory and Applications (FICTA 2021) (2021), pp. 31–39 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-16
  45. [12] Shi, Y.; Zhang, Y.; Xia, K. et al.: A Critical Review of Feature Recognition Techniques. Computer-Aided Design and Applications 17 (2020) 5, pp. 861–899 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-16
  46. [13] Shi, P.; Qi, Q.; Qin, Y. et al.: A novel learning-based feature recognition method using multiple sectional view representation. Journal of Intelligent Manufacturing 31 (2020) 5, pp. 1291–1309 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-16
  47. [14] Peddireddy, D.; Fu, X.; Shankar, A. et al.: Identifying manufacturability and machining processes using deep 3D convolutional networks. Journal of Manufacturing Processes 64 (2021), pp. 1336–1348 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-16
  48. [15] [15] Tan, C.; Sun, F.; Kong, T. et al.: A Survey on Deep Transfer Learning. arxiv.org/abs/1808.01974 (2018), doi.org/10.48550/arXiv.1808.01974 oder doi.org/10.1007/978–3–030–01424–7_27 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-16
  49. [16] Koch, S.; Matveev, A.; Jiang, Z. et al.: ABC: A Big CAD Model Dataset For Geometric Deep Learning. arXiv:1812.06216v2 (2018), doi.org/10.48550/arXiv.1812.06216 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-16
  50. [17] Dekhtiar, J.; Durupt, A.; Bricogne, M. et al.: Deep learning for big data applications in CAD and PLM – Research review, opportunities and case study. Computers in Industry 100 (2018), pp. 227–243 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-16
  51. [18] Kim, S.; Chi, H.; Hu, X. et al.: A Large-Scale Annotated Mechanical Components Benchmark for Classification and Retrieval Tasks with Deep Neural Networks. In: Vedaldi, A.; Bischof, H.; Brox, T. et al. (Hrsg.): Computer Vision – ECCV 2020. Cham: Springer International Publishing 2020, pp. 175–191 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-16
  52. [1] Schnell, J.; Nentwich, C.; Endres, F. et al.: Data mining in lithium-ion battery cell production. Journal of Power Sources 413 (2019), pp. 360–366 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-21
  53. [2] Schnell, J.; Reinhart, G.: Quality Management for Battery Production: A Quality Gate Concept. Procedia CIRP 57 (2016), pp. 568–573 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-21
  54. [3] Kwade, A.; Haselrieder, W.; Leithoff, R. et al.: Current status and challenges for automotive battery production technologies. Nature Energy 3 (2018) 4, pp. 290–300 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-21
  55. [4] Turetskyy, A.; Thiede, S.; Thomitzek, M. et al.: Toward Data‐Driven Applications in Lithium‐Ion Battery Cell Manufacturing. Energy Technology 8 (2020) 2, pp. 1900136 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-21
  56. [5] Korthauer, R.: Handbuch Lithium-Ionen-Batterien. Heidelberg: Springer 2013 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-21
  57. [6] Bauernhansl, T.; Hompel, M. ten; Vogel-Heuser, B.: Industrie 4.0 in Produktion, Automatisierung und Logistik. Wiesbaden: Springer Fachmedien 2014 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-21
  58. [7] Wood, D. L.; Li, J.; Daniel, C.: Prospects for reducing the processing cost of lithium ion batteries. Journal of Power Sources 275 (2015), pp. 234–242 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-21
  59. [8] Günter, F. J.; Burgstaller, C.; Konwitschny, F. et al.: Influence of the Electrolyte Quantity on Lithium-Ion Cells. Journal of the Electrochemical Society 166 (2019) 10, A1709-A1714 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-21
  60. [9] Gaines, L.; Cuenca, R.: Costs of lithium-ion batteries for vehicles. Stand: 2000.Internet: www.osti.gov/servlets/purl/761281. Zugriff am 06.06.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-21
  61. [10] Kurzweil, P.; Dietlmeier, O. K.: Elektrochemische Speicher. Wiesbaden: Springer Fachmedien mit Hi2015 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-21
  62. [11] Lin, H.; Wang, L.; Yu, J. et al.: Nonlinear Error Compensation for Load Cells Based on the Optimal Neural Network With an Augmented Lagrange Multiplier. IEEE Transactions on Instrumentation and Measurement 64 (2015) 11, pp. 2850–2862 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-21
  63. [12] [Liu, Y.; Zhang, R.; Wang, J. et al.: Current and future lithium-ion battery manufacturing. iScience 24 (2021) 4, p. 102332 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-21
  64. [1] DIN EN ISO/ASTM 52900:2022–03: Additive Fertigung – Grundlagen – Terminologie (ISO/ASTM 52900:2021); Deutsche Fassung EN ISO/ASTM 52900:2021 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  65. [2] Pérez, M.; Carou, D.; Rubio, E. M. et al.: Current advances in additive manufacturing. Procedia CIRP 88 (2020), pp. 439–444 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  66. [3] Plocher, J.; Panesar, A.: Review on design and structural optimisation in additive manufacturing: Towards next-generation lightweight structures. Materials & Design 183 (2019), # 108164 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  67. [4] Yang, S.; Tang, Y.; Zhao, Y. F.: A new part consolidation method to embrace the design freedom of additive manufacturing. Journal of Manufacturing Processes 20 (2015), pp. 444–449 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  68. [5] Schlingmann, T.: Die additive Fertigung löst größte Herausforderungen der Werkzeugtechnik. Maschinenbau 1 (2021) 5, S. 26–29 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  69. [6] Mani, M.; Lyons, K. W.; Gupta, S. K.: Sustainability Characterization for Additive Manufacturing. Journal of research of the National Institute of Standards and Technology 119 (2014), pp. 419–428 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  70. [7] AMFG Autonomous Manufacturing: Wie ausgereift sind die 3D-Metalldrucktechnologien? Stand: 2019. Internet: amfg.ai/de/2019/09/16/wie-ausgereift-sind-die-3d-metalldrucktechnologien/. Zugriff am 30.05.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  71. [8] AMPOWER: Additive Manufacturing Report. Internet: additive-manufacturing-report.com/additive-manufacturing-market/. Zugriff am 30.05.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  72. [9] Strano, G.; Hao, L.; Everson, R. M. et al.: Surface roughness analysis, modelling and prediction in selective laser melting. Journal of Materials Processing Technology 213 (2013) 4, pp. 589–597 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  73. [10] Reznik, D.; Kastsian, D.; Lüthen, V. et al.: 3D‐-Drucken mit Metallen. Physik in unserer Zeit 50 (2019) 1, S. 28–35 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  74. [11] Kellens, K.; Mertens, R.; Paraskevas, D. et al.: Environmental Impact of Additive Manufacturing Processes: Does AM Contribute to a More Sustainable Way of Part Manufacturing? Procedia CIRP 61 (2017), pp. 582–587 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  75. [12] Reisch, R. T.; Hauser, T.; Lutz, B. et al.: Context awareness in process monitoring of additive manufacturing using a digital twin. The International Journal of Advanced Manufacturing Technology 119 (2022) 5–6, pp. 3483–3500 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  76. [13] Colosimo, B. M.; Grasso, M.: In-situ monitoring in L-PBF: opportunities and challenges. Procedia CIRP 94 (2020), pp. 388–391 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  77. [14] Wycisk, E.: Ermüdungseigenschaften der laseradditiv gefertigten Titanlegierung TiAl6V4. Heidelberg: Springer 2017 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  78. [15] Ma, M.; Wang, Z.; Gao, M. et al.: Layer thickness dependence of performance in high-power selective laser melting of 1Cr18Ni9Ti stainless steel. Journal of Materials Processing Technology 215 (2015), pp. 142–150 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  79. [16] Masoomi, M.; Thompson, S. M.; Shamsaei, N.: Quality part production via multi-laser additive manufacturing. Manufacturing Letters 13 (2017), pp. 15–20 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  80. [17] Makoana, N.; Yadroitsava, I.; Möller, H. et al.: Characterization of 17–4PH Single Tracks Produced at Different Parametric Conditions towards Increased Productivity of LPBF Systems—The Effect of Laser Power and Spot Size Upscaling. Metals 8 (2018) 7, # 475 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  81. [18] Wiesner, A.; Schwarze, D.: Multi-Laser Selective Laser Melting. International Conference on Photonic Technologies, LANE 2014 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  82. [19] Gong, H.; Rafi, K.; Gu, H. et al.: Analysis of defect generation in Ti–6Al–4V parts made using powder bed fusion additive manufacturing processes. Additive Manufacturing 1–4 (2014), pp. 87–98 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  83. [20] Schleifenbaum, H.; Meiners, W.; Wissenbach, K. et al.: Individualized production by means of high power Selective Laser Melting. CIRP Journal of Manufacturing Science and Technology 2 (2010) 3, pp. 161–169 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  84. [21] Gong, H.; Rafi, K.; Starr, T. et al.: The Effects of Processing Parameters on Defect Regularity in Ti-6Al-4V Parts Fabricated By Selective Laser Melting and Electron Beam Melting. 24th Annual International Solid Freeform Fabrication Symposium, SFF 2013, pp. 424–439 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  85. [22] Bremen, S.; Meiners, W.; Diatlov, A.: Selective Laser Melting. Laser Technik Journal 9 (2012) 2, pp. 33–38 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  86. [23] An, Q.; Dang, J.: Cooling Effects of Cold Mist Jet with Transient Heat Transfer on High-Speed Cutting of Titanium Alloy. International Journal of Precision Engineering and Manufacturing-Green Technology 7 (2020) 2, pp. 271–282 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  87. [24] Buchbinder, D.; Schleifenbaum, H.; Heidrich, S. et al.: High Power Selective Laser Melting (HP SLM) of Aluminum Parts. Physics Procedia 12 (2011), pp. 271–278 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  88. [25] Brandl, E.; Heckenberger, U.; Holzinger, V. et al.: Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior. Materials & Design 34 (2012), pp. 159–169 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  89. [26] Du Plessis, A.; Beretta, S.: Killer notches: The effect of as-built surface roughness on fatigue failure in AlSi10Mg produced by laser powder bed fusion. Additive Manufacturing 35 (2020), # 101424 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  90. [27] Ye, C.; Zhang, C.; Zhao, J. et al.: Effects of Post-processing on the Surface Finish, Porosity, Residual Stresses, and Fatigue Performance of Additive Manufactured Metals: A Review. Journal of materials engineering and performance 30 (2021) 9, pp. 6407–6425 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  91. [28] Everton, S. K.; Hirsch, M.; Stravroulakis, P. et al.: Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing. Materials & Design 95 (2016), pp. 431–445 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  92. [29] DIN ISO 50006:2017–04: Energiemanagementsysteme – Messung der energiebezogenen Leistung unter Nutzung von energetischen Ausgangsbasen (EnB) und Energieleistungskennzahlen (EnPI) – Allgemeine Grundsätze und Leitlinien (ISO 50006:2014). Deutsche Fassung Ausgabe 2017 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-29
  93. [1] Oerlikon Balzers Coating Germany GmbH: Prozesssicher Gewinde fertigen. Stand: 2022. Internet: www.form-werkzeug.de/a/fachartikel/prozesssicher-gewinde-fertigen-3184910. Zugriff am 24.04.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-34
  94. [2] Biermann, D.; Özkaya, E.; Hannich, S. et al.: Strömungstechnische Optimierung von Hochleistungsgewindebohrern. VDI-Z Integrierte Produktion (2016) 158, S.30–33 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-34
  95. [3] Lakner, T.: High-pressure cutting fluid supply in milling. Dissertation, RWTH Aachen University, 2021 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-34
  96. [4] Oezkaya, E.: FEM-basiertes Softwaresystem für die effiziente 3D-Gewindebohrsimulation und Werkzeugoptimierung mittels CFD-Simulation. Dissertation, Technische Universität Dortmund, 2017 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-34
  97. [5] Gibson, I.; Rosen, D.; Stucker, B. et al.: Additive manufacturing technologies. Cham: Springer-Verlag 2021 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-34
  98. [6] Neher Group: Additive Fertigung. Das Fertigungsverfahren für die Zukunft. Stand: 2019: Internet: www.neher-group.com/de/Aktuelles/2019/03/06/Additive-Fertigung. Zugriff am 24.04.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-34
  99. [7] N. N.: Lasersintern erweitert Fertigungsmöglichkeiten von Präzisionswerkzeugen. Firmenbroschüre Mapal Dr. Kress KG, Aalen, 2017 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-34
  100. [8] Urma AG Werkzeugfabrik: Serien-Drehwerkzeug mit innenliegenden Kanalstrukturen. Maschinenbau Schweiz (2019) 11, S. 14–15 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-34
  101. [9] Kulmala, T.: Geringeres Gewicht – höhere Leistung. Sandvik Coromant. Internet: www.sandvik.coromant.com/de-de/mww/pages/t_cm390am.aspx. Zugriff am 24.04.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-34
  102. [10] Padmakumar, M.: Additive Manufacturing of Tungsten Carbide Hardmetal Parts by Selective Laser Melting (SLM), Selective Laser Sintering (SLS) and Binder Jet 3D Printing (BJ3DP) Techniques. Lasers in Manufacturing and Materials Processing 7 (2020) 3, pp. 338–371 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-34
  103. [11] Schwanekamp, T.: Pulverbettbasiertes Laserstrahlschmelzen von Hartmetallen zur additiven Herstellung von Zerspanwerkzeugen. Dissertation, Ruhr-Universität Bochum, 2021 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-34
  104. [12] Kernan, B. D.; Sachs, E. M.; Oliveira, M. A. et al.: Three-dimensional printing of tungsten carbide–10wt% cobalt using a cobalt oxide precursor. International Journal of Refractory Metals and Hard Materials 25 (2007) 1, pp. 82–94 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-34
  105. [13] Weigold, M.; Scherer, T.; Schmidt, E. et al.: Additive Fertigung keramischer Schneidstoffe. wt Werkstattstechnik online (2020) 110, S. 2–6. Internet: www.werkstattstechnik.de. Düsseldorf: VDI Fachmedien Open Google Scholar doi.org/10.37544/1436-4980-2023-06-34
  106. [14] Kempen, K.; Vrancken, B.; Buls, S. et al.: Selective Laser Melting of Crack-Free High Density M2 High Speed Steel Parts by Baseplate Preheating. Journal of Manufacturing Science and Engineering 136 (2014) 6, doi.org/10.1115/1.4028513 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-34
  107. [15] Zumofen, L.; Beck, C.; Kirchheim, A. et al.: Quality Related Effects of the Preheating Temperature on Laser Melted High Carbon Content Steels. Industrializing Additive Manufacturing – Proceedings of Additive Manufacturing in Products and Applications – AMPA2017 (2018), pp. 210–219 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-34
  108. [16] Saewe, J.; Gayer, C.; Vogelpoth, A. et al.: Feasability Investigation for Laser Powder Bed Fusion of High-Speed Steel AISI M50 with Base Preheating System. BHM Berg- und Hüttenmännische Monatshefte 164 (2019) 3, S. 101–107 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-34
  109. [17] Kelliger, T.; Meurer, M.; Bergs, T.: Orthogonal cutting with additively manufactured grooving inserts made from HS6–5–3–8 high-speed steel. Materials Research Proceedings 28 (2023), pp 1235–1244, doi.org/10.21741/9781644902479–134 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-34
  110. [18] BASS GmbH & Co. KG: Gewindefurchen – die spanlose Alternative zum Gewindebohren. Fräsen & Bohren (2020) 4, S. 30–31 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-34
  111. [19] Klocke, F.: Fertigungsverfahren 1. Zerspanung mit geometrisch bestimmter Schneide. Heidelberg: Springer-Verlag 2018 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-34
  112. [20] Hesterberg, S.: Trockenbearbeitung nichtrostender Stähle. Prozessgestaltung für das Drehen und Bohren mit Wendeschneidplatten. Dissertation, Universität Dortmund, 2006 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-34
  113. [21] Walter AG: Produkthandbuch Gewinden. Präzise, sicher, wirtschaftlich - Gewinden mit Walter Prototyp. Stand: 2012. Intenet: cdn.walter-tools.com/files/sitecollectiondocuments/downloads/global/manuals/de-de/handbook-prototyp-threading-2012-de.pdf. Zugriff am 25.04.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-34
  114. [22] muge-Franken (Hrsg.): Handbuch der Gewindetechnik und Frästechnik. Anwendungen, Tipps, Tabellen. Erlangen: Publicis Corporate Publishing 2004 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-34
  115. [1] Hügel, H.; Graf, T.: Laser in der Fertigung. Strahlquellen, Systeme, Fertigungsverfahren. Wiesbaden: Vieweg + Teubner 2009 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-41
  116. [2] Eichler, H. J.; Eichler, J.: Laser. Bauformen, Strahlführung, Anwendungen. Heidelberg: Springer 2015 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-41
  117. [3] Bachmann, F.: High Power Diode Lasers. Technology and Applications. New York: Springer 2007 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-41
  118. [4] Sigrist, M. W.: Laser. Theorie, Typen und Anwendungen. Heidelberg: Springer Spektrum 2018 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-41
  119. [5] Eichler, J.; Dünkel, L.; Eppich, B.: Die Strahlqualität von Lasern – Wie bestimmt man Beugungsmaßzahl und Strahldurchmesser in der Praxis? Laser Technik Journal 1 (2007) 2, S. 63–66 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-41
  120. [6] Brinksmeier, E.; Riemer, O.; Gläbe, R. M.: Fabrication of Complex Optical Components. From Mold Design to Product. Heidelberg: Springer 2013 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-41
  121. [7] Bliedtner, J.: Optiktechnologie. Grundlagen – Verfahren – Anwendungen – Beispiele. München: Hanser 2022 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-41
  122. [8] Nollau, S.; Kunz, A.; Rübenach, O. et al.: Innovative Optikdesigns durch Präzisionsblankpressen. Optik & Photonik 6 (2011) 1, S. 30–34 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-41
  123. [9] Saljé, E.: Prozessoptimierung beim Schleifen keramischer Werkstoffe. Industrie Diamanten Rundschau IDR 21 (1987) 4, S. 243–247 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-41
  124. [10] Marshall, D. B.: The nature of machining damage in brittle materials. Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences 385 (1983) 1789, pp. 461–475 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-41
  125. [11] König, W.: Fertigungsverfahren 2. Schleifen, Honen, Läppen. Heidelberg: Springer 2005 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-41
  126. [12] Sinhoff, V. R.: Feinbearbeitung optischer Gläser in der Kleinserie. Dissertation, TH Aachen, 1996 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-41
  127. [13] Klocke, F.; Wirtz, C.; Mueller, S. et al.: Analysis of the Material Behavior of Cemented Carbides (WC-Co) in Grinding by Single Grain Cutting Tests. Procedia CIRP 46 (2016), pp. 209–213 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-41
  128. [14] Tiku, S.; Biswas, D.: III-V integrated circuit fabrication technology. Boca Raton, Florida: Pan Stanford Publishing 2016 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-41
  129. [15] Trapp, F. von: Wafer Dicing: A Sticky Situation. Stand: 2007. Internet: sst.semiconductor-digest.com/2007/03/wafer-dicing-a-sticky-situation/. Zugriff am 16.05.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-41
  130. [16] Omazic, M.; Tscharnuter, D.; Oreski, G. et al.: Optimum Chip-Tape Adhesion for Reliable Pickup Process. IEEE Transactions on Components, Packaging and Manufacturing Technology 7 (2017) 12, pp. 2057–2065 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-41
  131. [17] Ozawa, T.; Ishiwata, S.; Kano, Y. et al.: Acrylate Copolymer/Ultraviolet Curable Oligomer Blends as Pressure-sensitive Adhesives. The Journal of Adhesion 72 (2000) 1, pp. 1–16 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-41
  132. [18] Ebe, K.; Seno, H.; Horigome, K.: UV curable pressure-sensitive adhesives for fabricating semiconductors. I. Development of easily peelable dicing tapes. Journal of Applied Polymer Science 90 (2003) 2, pp. 436–441 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-41
  133. [1] Kress, J.: Auswahl und Einsatz von polykristallinem kubischem Bornitrid beim Drehen, Fräsen und Reiben. Essen: Vulkan-Verlag 2007 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-47
  134. [2] Butler-Smith, P.: The economics of rapid grinding of PCD and PCBN cutting tools. Industrial Diamond Review 63 (2003) 596, pp. 20–23 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-47
  135. [3] Wendt GmbH: Know-How gesucht und gefunden. Systemanbieter präsentiert optimale Lösungen beim Schleifen von CBN-/PKD-Werkzeugen. NC-Fertigung (2003) 05–03, S. 84–87 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-47
  136. [4] Behrens, L.: Schleifen von PCBN. Dissertation, Leibniz Universität Hannover, Garbsen: TEWISS Verlag 2016 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-47
  137. [5] Friemuth, T.: Herstellung spanender Werkzeuge. Düsseldorf: VDI-Verlag 2002 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-47
  138. [6] Denkena, B.; Grove, T.; Kempf, F. et al.: Model-based manufacturing and application of metal-bonded grinding wheels. CIRP Annals 68 (2019) 1, pp. 321–324 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-47
  139. [7] Denkena, B.; Krödel, A.; Wilckens, M.: Einfluss der Kornkonzentration auf die Bindungshärte sintermetallischer Schleifwerkzeuge. Werkstatt und Betrieb. Stand: Juli 2021. Internet: www.werkstatt-betrieb.de/a/article-339084. Zugriff am 05.05.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-47
  140. [1] Tawakoli, T. (Hrsg.): Moderne Schleiftechnologie und Feinstbearbeitung 2010. Dissertation, Hochschule Furtwangen University, Villingen-Schwenningen, 2010 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-52
  141. [2] Böß, V.: Werkzeugwege für das Bandschleifen von Freiformflächen. Garbsen: PZH Produktionstechnisches Zentrum 2007 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-52
  142. [3] Tönshoff, H.-K.; Böß, V.; Urban, B.: Automatisiertes Schleifen von Hohlformen. wt Werkstattstechnik online 91 (2001) 7, S. 422–427. Internet: www.werkstattstechnik.de. Düsseldorf: Springer-VDI-Verlag Open Google Scholar doi.org/10.37544/1436-4980-2023-06-52
  143. [4] Meyerhoff, M.: NC-Programmierung für das kraftgesteuerte Bandschleifen von Freiformflächen. Düsseldorf: VDI-Verlag 1998 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-52
  144. [5] Timmermann, S.: Automatisierung der Feinbearbeitung in der Fertigung von Hohlformwerkzeugen. Dissertation, Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe, 1990 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-52
  145. [6] Tücks, R.: Automatisierte Feinbearbeitung von komplexen Werkzeugen und Formen aus Stahl. Aachen: Apprimus-Verlag 2012 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-52
  146. [7] Driemeyer Wilbert, A.; Behrens, B.; Dambon, O. et al.: Robot assisted manufacturing system for high gloss finishing of steel molds. In: Su, C. Y., Rakheja, S., Liu, H. (eds.): Intelligent Robotics and Applications. ICIRA 2012, pp. 673–685, doi.org/10.1007/978–3–642–33509–9_67 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-52
  147. [8] Denkena, B.; Turger, A.; Wang, B. et al.: Fünfachsige Schleifbearbeitung-Medizintechnik, Turbinenbau, Werkzeug-und Formenbau. 8. Seminar Moderne Schleiftechnologie und Feinstbearbeitung. Neue Entwicklungen und Trends aus Forschung und Praxis 2010, pp. 3.10 – 3.19 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-52
  148. [9] Tönshoff, H.-K.; Denkena, B.; Böß, V. et al.: Automated finishing of dies and molds. Production Engineering 9 (2002) 2, pp. 1–4 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-52
  149. [10] Denkena, B.; Lütjens, G.; Böß, V.: Feinbearbeitung von Werkzeugen und Formen. Automatisiertes Schleifen und Bandschleifen von Freiformflächen im Praxiseinsatz. wt Werkstattstechnik online 93 (2003) 11, S. 729–734. Internet: www.werkstattstechnik.de. Düsseldorf: Springer-VDI-Verlag Open Google Scholar doi.org/10.37544/1436-4980-2023-06-52
  150. [11] Denkena B., Krödel A., Wilckens M.: Einfluss der Schleifscheibenanstellung auf die Oberflächenqualität. wt Werkstattstechnik online 110 (2020) 6, S. 389–392. Internet: www.werkstattstechnik.de. Düsseldorf: VDI Fachmedien Open Google Scholar doi.org/10.37544/1436-4980-2023-06-52
  151. [12] Nagata, F.; Watanabe, K.; Kusumoto, Y. et al.: New Finishing System for Metallic Molds Using a Hybrid MotiodForce Control. 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422), Taipei, Taiwan, 2003, pp. 2171–2175 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-52
  152. [13] Driemeyer Wilbert, A.; Behrens, B.; Zymla, C. et al.: Robotic finishing process – An extrusion die case study. CIRP Journal of Manufacturing Science and Technology 11 (2015), pp. 45–52 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-52
  153. [14] Tücks, R.; Zunke R.; Driemeyer Wilbert, A.: MoldFinish. Intelligentes Poliersystem zur Automatisierung der Endbearbeitung im Werkzeug- und Formenbau. Aachen: Verlag Fraunhofer IPT 2011 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-52
  154. [15] Preston, F. W.: The theory and design of plate glass polishing machines. Journal of the Society of Glass Technology 11. (1927), pp. 214–256 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-52
  155. [16] Hi.automize GmbH: iCTS-The Intelligent Compliant Tooling System. Internet: www.hi-automize.de/cth-one. Zugriff am 16.05.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-52
  156. [17] Alzmetall Werkzeugmaschinenfabrik und Gießerei Friedrich GmbH & Co. KG: Bearbeitungszentrum GS1000/5-FDT. Internet: alzmetall.de/produkt/bearbeitungszentrum-gs-1000–5-fdt/. Zugriff am 16.05.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-52
  157. [18] Daiwa Kasai Kogyo Co., Ltd: DAIWA RABIN. Internet: www.daiwa-rabin.co.jp/digitalcatalog/pdf_en/daiwa_e_all.pdf. Zugriff am 16.05.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-52
  158. [19] Produktdatenblatt. B-Cool 9665. Stand: 2016. Internet: www.oel-engel.de/mediafiles/Produktblatt/B-Coll_9665_Var._45_PIDS.pdf. Zugriff am 16.05.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-52
  159. [20] Mahr Metering Systems GmbH: MarSurf LD 130 – Konturen- und Rauheitsmessgerät. Internet: metrology.mahr.com/de/produkte/artikel/6720821-kombinierter-konturen-und-oberflaechenmessplatz-marsurf-ld-130. Zugriff am 16.05.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-52
  160. [21] Klein, T. B.: Prozessstrategien beim NC-Formschleifen mit Schleifstiften. Dissertation, Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik; Technische Universität Berlin, 2015 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-52
  161. [1] Gößling-Reisemann, S.; Stührmann, S.; Wachsmuth, J. et al.: Vulnerabilität und Resilienz von Energiesystemen. In: Radtke, J.; Henning, B. (Hrsg.): Die deutsche „Energiewende“ nach Fukushima. Der wissenschaftliche Diskurs zwischen Atomausstieg und Wachstumsdebatte. Weimar (Lahn): Metropolis impr. 2013, S. 367–396 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-58
  162. [2] Tukamuhabwa, B. R.; Stevenson, M.; Busby, J. et al.: Supply chain resilience: definition, review and theoretical foundations for further study. International Journal of Production Research 53 (2015) 18, S. 5592–5623 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-58
  163. [3] Roque Júnior, L. C.; Frederico, G. F.; Costa, M. L. N.: Maturity and resilience in supply chains: a systematic review of the literature. International Journal of Industrial Engineering and Operations Management 5 (2023) 1, S. 1–25 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-58
  164. [4] Ivanov, D.; Hägele, S.; Grosse, E. H.: Supply chain resilience: a tertiary study. International Journal of Integrated Supply Management 16 (2023) 1, S. 1 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-58
  165. [5] Alexopoulos, K.; Anagiannis, I.; Nikolakis, N. et al.: A quantitative approach to resilience in manufacturing systems. International Journal of Production Research (2022), S. 1–16 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-58
  166. [6] Cheng, Y.; Elsayed, E. A.; Huang, Z.: Systems resilience assessments: a review, framework and metrics. International Journal of Production Research 60 (2022) 2, S. 595–622 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-58
  167. [7] Yang, M.; Sun, H.; Geng, S.: On the quantitative resilience assessment of complex engineered systems. Process Safety and Environmental Protection 174 (2023), S. 941–950 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-58
  168. [8] Caputo, A. C.; Pelagagge, P. M.; Salini, P.: A methodology to estimate resilience of manufacturing plants. IFAC-PapersOnLine 52 (2019) 13, S. 808–813 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-58
  169. [9] Caputo, A. C.; Donati, L.; Salini, P.: Estimating Resilience of Manufacturing Plants: Model and Application (2023). Internet: https://dx.doi.org/10.2139/ssrn.4352124. Zugriff am 23.05.2023 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-58
  170. [10] Gibbons, P. M.; Burgess, S. C.: Introducing OEE as a measure of lean Six Sigma capability. International Journal of Lean Six Sigma 1 (2010) 2, S. 134–156 Open Google Scholar doi.org/10.37544/1436-4980-2023-06-58

Citation

Download RIS Download BibTex

Downloads

Download chapter (PDF)

Notice

This work is protected by copyright and may only be used in accordance with the provisions of the Terms of Use and License Agreement. Any use of the work beyond this is expressly prohibited and will be prosecuted.

Share via email

Media