Kaltumformung von metastabilem Cr-Ni-Cu-Stahlguss/Cold forming of metastable Cr-Ni-Cu cast steel - Challenges in developing a forming technology
Table of contents
Bibliographic information
Open Access Full access
wt Werkstattstechnik online
Volume 113 (2023), Issue 10
- Authors:
- Publisher
- VDI fachmedien, Düsseldorf
- Copyright Year
- 2023
- ISSN-Online
- 1436-4980
- ISSN-Print
- 1436-4980
Chapter information
Open Access Full access
Volume 113 (2023), Issue 10
Kaltumformung von metastabilem Cr-Ni-Cu-Stahlguss/Cold forming of metastable Cr-Ni-Cu cast steel - Challenges in developing a forming technology
- Authors:
- ISSN-Print
- 1436-4980
- ISSN-Online
- 1436-4980
- Preview:
Bibliography
No match found. Try another term.
- [1] Stringfellow, R. G.; Parks, D. M.; Olson, G.B.: A constitutive model for transformation plasticity accompanying strain-induced martensitic transformations in metastable austenitic steels. Acta Metallurgica et Materialia 40 (1992) 7, pp. 1703–1716 Open Google Scholar DOI: 10.37544/1436-4980-2023-10-54
- [2] Wendler, M.; Ullrich, C.; Hauser, M. et al.: Quenching and partitioning (Q&P) processing of fully austenitic stainless steels. Acta Materialia 133 (2017), pp. 346–355 Open Google Scholar DOI: 10.37544/1436-4980-2023-10-54
- [3] Fahr ,D.: Stress-and Strain-Induced Formation of Martensite and its Effects on Strength and Ductility of Metastable Austenitic Stainless Steels. Metallurgical Transactions 2 (1971), pp. 1883–1892 Open Google Scholar DOI: 10.37544/1436-4980-2023-10-54
- [4] Hauser, M.; Nitzsche, P.; Weidner, A. et al.: Effect of Cu addition on solidification, precipitation behavior and mechanical properties in austenitic CrNi–N stainless steel. Materials Science and Engineering A 862 (2023), #144422 Open Google Scholar DOI: 10.37544/1436-4980-2023-10-54
- [5] Weiß, A.; Wendler, M.; Lehmann, G. et al.: Hochfester kaltumformbarer austenitischer Stahlguss mit TRIP/ TWIP-Eigenschaften. Konstruktion 64 (2012) 7/8, S. 63–66 Open Google Scholar DOI: 10.37544/1436-4980-2023-10-54
- [6] Biermann, H.; Aneziris, C. G. (eds.): Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites: Design of Tough, Transformation-Strengthened Composites and Structures. Cham: Springer International Publishing 2020 Open Google Scholar DOI: 10.37544/1436-4980-2023-10-54
- [7] Grüner, P.: Das Walzen von Hohlkörpern und Kalibrieren von Werkzeugen zur Herstellung nahtloser Rohre. Heidelberg: Springer-Verlag 1959 Open Google Scholar DOI: 10.37544/1436-4980-2023-10-54
- [8] Spittel, T.; Hensel, A.: Rationeller Energieeinsatz bei Umformprozessen. München: Deutscher Taschenbuch Verlag 1983 Open Google Scholar DOI: 10.37544/1436-4980-2023-10-54
- [9] Der Spiegel: Der Nickelpreis steigt auf über 100.000 Dollar pro Tonne. Stand: 08.03.2022. Internet: https://www.spiegel.de/wirtschaft/nickel-preis-steigt-auf-rekordhoch-a-93b0053e-efb3–404a-adf6–15a001afe827. Zugriff am 18.09.2023 Open Google Scholar DOI: 10.37544/1436-4980-2023-10-54
