Nachhaltige Geschäftsmodelle durch digitale Zwillinge/Sustainable Business Models through Digital Twins

Table of contents

Bibliographic information

Cover of Volume: wt Werkstattstechnik online Volume 114 (2024), Issue 06
Open Access Full access

wt Werkstattstechnik online

Volume 114 (2024), Issue 06

Authors:
Publisher
VDI fachmedien, Düsseldorf
Copyright Year
2024
ISSN-Online
1436-4980
ISSN-Print
1436-4980

Chapter information

Open Access Full access

Volume 114 (2024), Issue 06

Nachhaltige Geschäftsmodelle durch digitale Zwillinge/Sustainable Business Models through Digital Twins

Authors:
ISSN-Print
1436-4980
ISSN-Online
1436-4980
Preview:

Manufacturing companies have always been confronted with an increasing number and complexity of requirements, which is reinforced by sustainability requirements from legislators, customers, and investors. It is important to consider these new requirements not as a burden, but as an opportunity to develop sustainable business models. This article presents a business model-oriented development approach for digital twins in industry.

Bibliography

  1. [1] Lindemann, U.; Maurer, M.: Facing Multi-Domain Complexity i n Product Development. In: Krause, FL. (eds) The Future of Product Development. Heidelberg: Springer-Verlag 2007, S. 351–361 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  2. [2] Stark, R.; Anderl, R.; Thoben, K.-D. et al.: WiGeP-Positionspapier: „Digitaler Zwilling“. Zeitschrift für wirtschaftlichen Fabrikbetrieb 115 (2020) s1, S. 47–50 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  3. [3] Eigner, M.; Detzner, A.; Schmidt, P. H. et al.: Definition des Digital Twin im Produktlebenszyklus. Zeitschrift für wirtschaftlichen Fabrikbetrieb 114 (2019) 6, S. 345–350 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  4. [4] Barni, A.; Fontana, A.; Menato, S. et al.: Exploiting the digital twin in the assessment and optimization of sustainability performances. 2018 International Conference on Intelligent Systems (IS), Funchal, Portugal, 2018, pp. 706–713 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  5. [5] Werner, A.; Zimmermann, N.; Lentes, J.: Approach for a holistic predictive maintenance strategy by incorporating a digital twin. Procedia Manufacturing 39 (2019), pp. 1743–1751 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  6. [6] Werner, A.; Angadi, V. C.; Lentes, J. et al.: Vorausschauende Instand- haltung – Wenn der Digitale Schatten an seine Grenzen stößt. Harmonisierung datengetriebener und physikbasierter Modelle für die vorausschauende Instandhaltung. Zeitschrift für wirtschaftlichen Fabrikbetrieb 115 (2020) 5, S. 335–339 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  7. [7] Werner, A.; Lentes, J.; Zimmermann, N.: Digitaler Zwilling zur vorausschauenden Instandhaltung in der Produktion – Physikbasierte Modellierung und Simulation zur Optimierung datengetriebener Modelle. Stuttgarter Symposium für Produktentwicklung, SSP 2021, S. 139–150 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  8. [8] Bergs, T.; Gierlings, S.; Augspurger, T. et al.: Enabling Sustainable Production with the Digital Twin. 30. Aachener Werkzeugmaschinen-Kolloquium 2021, S. 106–175 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  9. [9] Scheifele, C.: Plattform zur Echtzeit-Co-Simulation für die virtuelle Inbetriebnahme. Stuttgart: Fraunhofer Verlag 2019 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  10. [10] Scheifele, C.; Verl, A.; Riedel, O.: Echtzeit-Co-Simulation für die Virtuelle Inbetriebnahme. atp magazin 60 (2018) 11–12, S. 44–55 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  11. [11] Scheifele, C.; Verl, A.; Riedel, O.: Real-time co-simulation for the virtual commissioning of production systems. Procedia CIRP 79 (2019), pp. 397–402 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  12. [12] Hollas, L.; Schenke, C.-C.; Hellmich, A.: Approach of Model Extension for Virtual Commissioning to Predict Energy Consumption of Production Systems. Journal of Machine Engineering 23 (2023) 4, doi.org/10.36897/jme/174867 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  13. [13] Brovkina, D.; Riedel, O.: Automatisierte Planung von Montagelinien. WT Werkstattstechnik 110 (2020) 9, S. 591–596 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  14. [14] Mo, F.; Rehman, H. U.; Monetti, F. M. et al.: A framework for manufacturing system reconfiguration and optimisation utilising digital twins and modular artificial intelligence. Robotics and Computer-Integrated Manufacturing 82 (2023) #102524, pp. 1–19 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  15. [15] Panarotto, M.; Isaksson, O.; Vial, V.: Cost-efficient digital twins for design space exploration: A modular platform approach. Computers in Industry 145 (2023) #103813, pp. 1–13 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  16. [16] Oestersötebier, F.: Modellbasierter Entwurf intelligenter mechatronischer Systeme mithilfe semantischer Technologien. Dissertation, Universität Paderborn, 2018 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  17. [17] Vajna, S.; Weber, C.; Zeman, K. et al.: CAx für Ingenieure: Eine praxisbezogene Einführung. Heidelberg: Springer-Verlag 2018 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  18. [18] Lindemann, U.: Methodische Entwicklung technischer Produkte: Methoden flexibel und situationsgerecht anwenden. Heidelberg: Springer-Verlag 2009 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  19. [19] Qamsane, Y.; Moyne, J.; Toothman, M. et al.: A Methodology to Develop and Implement Digital Twin Solutions for Manufacturing Systems. IEEE Access 9 (2021), pp. 44247–44265 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  20. [20] Dekkers, R.; Carey, L.; Langhorne, P.: Making Literature Reviews Work: A Multidisciplinary Guide to Systematic Approaches. Cham: Springer International Publishing 2022 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  21. [21] Akhai, S.: Navigating the Potential Applications and Challenges of Intelligent and Sustainable Manufacturing for a Greener Future. Evergreen 10 (2023) 4, pp. 2237–2243 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  22. [22] He, B.; Bai, K. J.: Digital twin-based sustainable intelligent manufacturing: a review. Advances in Manufacturing 9 (2021) 1, pp. 1–21 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  23. [23] Huang, Z.; Shen, Y.; Li, J. et al.: A survey on AI-driven digital twins in industry 4.0: Smart manufacturing and advanced robotics. Sensors 21 (2021) 19, #6340 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  24. [24] Oettl, F.; Schoeler, J.; Schilp, J. (Hrsg.): Development of a method for evaluating the benefits of using a digital twin. International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022, pp. 1–7 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  25. [25] Preut, A.; Kopka, J.-P.; Clausen, U.: Digital twins for the circular economy. Sustainability (Switzerland) 13 (2021) 18, # 10467 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  26. [26] Zacharaki, A.; Vafeiadis, T.; Kolokas, N. et al.: RECLAIM: Toward a New Era of Refurbishment and Remanufacturing of Industrial Equipment. Frontiers in Artificial Intelligence 3 (2021), doi.org/10.3389/frai.2020.570562 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  27. [27] Yu, W.; Patros, P.; Young, B. et al.: Energy digital twin technology for industrial energy management: Classification, challenges and future. Renewable and Sustainable Energy Reviews 161 (2022) #112407 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  28. [28] Pohlkötter, F. J.; Straubinger, D.; Kuhn, A. M. et al.: Unlocking the Potential of Digital Twins. In: Kiefl, N.; Wulle, F.; Ackermann, C. et al. (Hrsg.): Advances in Automotive Production Technology – Towards Software-Defined Manufacturing and Resilient Supply Chains. Cham: Springer International Publishing 2023, pp. 190–199 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  29. [29] Singh, M.; Srivastava, R.; Fuenmayor, E. et al.: Applications of Digital Twin across Industries: A Review. Applied Sciences (Switzerland) 12 (2022) 11, #5727 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  30. [30] Fett, M.; Wilking, F.; Goetz, S. et al.: A Literature Review on the Development and Creation of Digital Twins, Cyber-Physical Systems, and Product-Service Systems. Sensors 23 (2023) 24, #9786 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  31. [31] helen, A.; Zhang, X.; Fink, O. et al.: A comprehensive review of digital twin — part 1: modeling and twinning enabling technologies. Structural and Multidisciplinary Optimization 65 (2022) 12, # 354 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  32. [32] Xie, Y.; Lian, K.; Liu, Q. et al.: Digital twin for cutting tool: Modeling, application and service strategy. Journal of Manufacturing Systems 58 (2021), pp. 305–312 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  33. [33] Ke, C.; Pan, X. Y.; Wan, P. et al.: An Intelligent Redesign Method for Used Products Based on Digital Twin. Sustainability (Switzerland) 15 (2023) 12, #9702 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  34. [34] Riedelsheimer, T.; Dorfhuber, L.; Stark, R.: User centered development of a digital twin concept with focus on sustainability in the clothing industry. Procedia CIRP 90 (2020), pp. 660–665 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  35. [35] Mügge, J.; Erdmann, J. G.; Riedelsheimer, T. et al.: Empowering End-of-Life Vehicle Decision Making with Cross-Company Data Exchange and Data Sovereignty via Catena-X. Sustainability (Switzerland) 15 (2023) 9, #7187 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  36. [36] Seegrün, A.; Kruschke, T.; Mügge, J. et al.: Sustainable product lifecycle management with Digital Twins: A systematic literature review. Procedia CIRP 119 (2022), pp. 776–781 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  37. [37] Hehenberger, P.; Leherbauer, D.; Penas, O. et al.: Holistic System Modelling and Analysis for Energy-Aware Production: An Integrated Framework. Systems 11 (2023) 2, doi.org/10.3390/systems11020100 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  38. [38] Ma, S. Y.; Zhang, Y. F.; Liu, Y. et al.: Data-driven sustainable intelligent manufacturing based on demand response for energy-intensive industries. Journal of Cleaner Production 274 (2020) #123155 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  39. [39] Matsunaga, F.; Zytkowski, V.; Valle, P. et al.: Optimization of Energy Efficiency in Smart Manufacturing Through the Application of Cyber-Physical Systems and Industry 4.0 Technologies. Journal of Energy Resources Technology, Transactions of the ASME 144 (2022) 10, #102104 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  40. [40] Matta, A.; Lugaresi, G.: Digital Twins: Features, Models, And Services. Proceedings of the 2023 Winter Simulation Conference, San Antonio, TX, USA, 2023, pp. 46–60 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  41. [41] Cimino, C.; Negri, E.; Fumagalli, L.: Review of digital twin applications in manufacturing. Computers in Industry 113 (2019) #103130 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  42. [42] Lürken, C.; Grünert, G.; Stauder, L. et al.: Concept for life cycle oriented ecological assessment in tooling. Procedia CIRP 120 (2022), pp. 362–367 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  43. [43] Turner, C.; Oyekan, J.: Manufacturing in the Age of Human-Centric and Sustainable Industry 5.0: Application to Holonic, Flexible, Reconfigurable and Smart Manufacturing Systems. Sustainability (Switzerland) 15 (2023) 13, #10169 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  44. [44] Rocca, R.; Rosa, P.; Sassanelli, C. et al.: Integrating virtual reality and digital twin in circular economy practices: A laboratory application case. Sustainability (Switzerland) 12 (2020) 6, #2286 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  45. [45] Hammerschmid, M.; Rosenfeld, D. C.; Bartik, A. et al.: Methodology for the Development of Virtual Representations within the Process Development Framework of Energy Plants: From Digital Model to Digital Predictive Twin—A Review. Energies 16 (2023) 6, #2641 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  46. [46] Kies, A. D.; Krauß, J.; Schmetz, A. et al.: Interaction of Digital Twins in a Sustainable Battery Cell Production. Procedia CIRP 107 (2022), pp. 1216–1220 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  47. [47] Turan, E.; Konuşkan, Y.; Yıldırım, N. et al.: Digital twin modelling for optimizing the material consumption: A case study on sustainability improvement of thermoforming process. Sustainable Computing: Informatics and Systems 35 (2022) #100655 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  48. [48] Zhao, L.; Fang, Y.; Lou, P. et al.: Cutting Parameter Optimization for Reducing Carbon Emissions Using Digital Twin. International Journal of Precision Engineering and Manufacturing 22 (2021) 5, pp. 933–949 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  49. [49] Werner, A.; Mendez-Rial, R.; Salvo, P. et al.: Architecture for Predictive Maintenance Based on Integrated Models, Methods and Technologies. In: Huang, C. Y., Dekkers, R., Chiu, S. F. et al. (eds): Intelligent and Transformative Production in Pandemic Times. Lecture Notes in Production Engineering. Cham: Springer 2023, pp. 259–274 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  50. [50] Friedenthal, S.: A Practical Guide to SysML: The Systems Modeling Language. Burlington/MS.: Morgan Kaufmann 2008 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  51. [51] Eigner, M.; Roubanov, D.; Zafirov, R.: Modellbasierte virtuelle Produktentwicklung. Heidelberg: Springer Vieweg 2014 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  52. [52] Eigner, M.: Modellbasierter Entwicklungsprozess Cybertronischer Systeme. Der PLM-Unterstützte Referenzentwicklungsprozess Für Produkte und Produktionssysteme. Heidelberg: Springer 2017 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  53. [53] VDI/VDE 2206: Entwicklung mechatronischer und cyber-physischer Systeme. Ausgabe November 2021 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  54. [54] Schröder, D.: Regelung von Antriebssystemen. Heidelberg: Springer Vieweg 2015 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  55. [55] Schmitt, T. L.; Andres, M.: Methoden zur Modellbildung und Simulation mechatronischer Systeme. Bondgraphen, objektorientierte Modellierungstechniken und numerische Integrationsverfahren. Wiesbaden: Springer Vieweg 2019 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28
  56. [56] Industrial Digital Twin Association e.V.: IDTA – Der Standard für den Digitalen Zwilling. Internet: industrialdigitaltwin.org/. Zugriff am 29.05.2024 Open Google Scholar DOI: 10.37544/1436-4980-2024-06-28

Citation

Download RIS Download BibTex

Downloads

Download chapter (PDF)

Notice

This work is protected by copyright and may only be used in accordance with the provisions of the Terms of Use and License Agreement. Any use of the work beyond this is expressly prohibited and will be prosecuted.

Share via email

Media