Prozessoptimierung mittels Inline-Geometriemessung/Process optimization by inline geometry measurement - Automation and digitalization in tailored forming process chains
Table of contents
Bibliographic information
Open Access Full access
wt Werkstattstechnik online
Volume 113 (2023), Issue 10
- Authors:
- Publisher
- VDI fachmedien, Düsseldorf
- Copyright Year
- 2023
- ISSN-Online
- 1436-4980
- ISSN-Print
- 1436-4980
Chapter information
Open Access Full access
Volume 113 (2023), Issue 10
Prozessoptimierung mittels Inline-Geometriemessung/Process optimization by inline geometry measurement - Automation and digitalization in tailored forming process chains
- Authors:
- ISSN-Print
- 1436-4980
- ISSN-Online
- 1436-4980
- Preview:
Bibliography
No match found. Try another term.
- [1] Kroll, L.: Technologiefusion für multifunktionale Leichtbaustrukturen. Heidelberg: Springer-Verlag, 2019 Open Google Scholar DOI: 10.37544/1436-4980-2023-10-35
- [2] Groche, P.; Wohletz, S.; Brenneis, M. et al.: Joining by forming – A review on joint mechanisms, applications and future trends. Journal of Materials Processing Technology 214 (2014) 10, pp. 1972–1994 Open Google Scholar DOI: 10.37544/1436-4980-2023-10-35
- [3] Behrens, B.-A.; Uhe, J.: Introduction to tailored forming. Production Engineering 15 (2021) 2, pp. 133–136 Open Google Scholar DOI: 10.37544/1436-4980-2023-10-35
- [4] Wiendahl, H.-P.; Hegenscheidt, M.: Produktivität komplexer Produktionsanlagen: Systematische Erhöhung durch Unterscheidung von lokalen und effektiven Stillständen. Zeitschrift für wirtschaftlichen Fabrikbetrieb 96 (2001) 4, S. 160–163, doi.org/10.3139/104.100400 Open Google Scholar DOI: 10.37544/1436-4980-2023-10-35
- [5] Volk, W.: Auf dem Weg zur intelligenten Fabrik. Zeitschrift für wirtschaftlichen Fabrikbetrieb 118 (2023) 5, S. 281–281, doi.org/10.1515/zwf-2023–2007 Open Google Scholar DOI: 10.37544/1436-4980-2023-10-35
- [6] Denkena, B.; Klemme, H.; Stiehl, T.: Überwachung von Werkzeugverschleiß: Maschinenübergreifende Nutzung von Prozessdaten mithilfe von Maschinellem Lernen. Zeitschrift für wirtschaftlichen Fabrikbetrie, 118 (2023) 5, S. 298–301, doi.org/10.1515/zwf-2023–1059 Open Google Scholar DOI: 10.37544/1436-4980-2023-10-35
- [7] Behrens, B.-A.; Brunotte, K.; Wester, H. et al.: Hardness Assessment Considering Nitrided Layers Based on Tempering Tests for Numerical Wear Prediction for Forging Processes. Materials 15 (2022) 20, ‘7105, doi.org/10.3390/ma15207105 Open Google Scholar DOI: 10.37544/1436-4980-2023-10-35
- [8] Beermann, R.; Quentin, L.; Kästner, M. et al.: Calibration routine for a telecentric stereo vision system considering affine mirror ambiguity. Optical Engineering 59 (2020) 5, 054104 doi.org/10.1117/1.OE.59.5.054104 Open Google Scholar DOI: 10.37544/1436-4980-2023-10-35
- [9] Beermann, R.; Bossemeyer, H.; Diekmann, R. et al.: Model-based calibration routine for a triangulation sensor for inner radius measurements of cylindrical components. Proceedings SPIE 11352 Optics and Photonics for Advanced Dimensional Metrology (2020), 113520S, doi.org/10.1117/12.2552729 Open Google Scholar DOI: 10.37544/1436-4980-2023-10-35
- [10] Middendorf, P.; Blümel, R.; Hinz, L. et al.: Pose Estimation and Damage Characterization of Turbine Blades during Inspection Cycles and component-protective Disassembly Processes. Sensors 22 (2022) 14, #5191, doi.org/10.3390/s22145191 Open Google Scholar DOI: 10.37544/1436-4980-2023-10-35
- [11] Hinz, L.; Metzner, S.; Müller, P. et al.: Fringe Projection Profilometry in Production Metrology: A Multi-Scale Comparison in Sheet-Bulk Metal Forming. Sensors 21 (2020) 7, #2389, doi.org/10.3390/s21072389 Open Google Scholar DOI: 10.37544/1436-4980-2023-10-35
- [12] Hinz, L.: In-situ 3D endoscopy based on fiber-optic fringe projection profilometry in production metrology. Dissertation, Gottfried Wilhelm Hannover Leibniz Universität, 2022, doi.org/https://doi.org/10.15488/12757 Open Google Scholar DOI: 10.37544/1436-4980-2023-10-35
