Personalplanung für Re-Assembly-Fabriken/Workforce Planning for Re-Assembly Factories

Table of contents

Bibliographic information

Cover of Volume: wt Werkstattstechnik online Volume 116 (2026), Edition 01-02
Open Access Full access

wt Werkstattstechnik online

Volume 116 (2026), Edition 01-02

Authors:
Publisher
VDI fachmedien, Düsseldorf
Copyright year
2026
ISSN-Online
1436-4980
ISSN-Print
1436-4980

Chapter information

Open Access Full access

Volume 116 (2026), Edition 01-02

Personalplanung für Re-Assembly-Fabriken/Workforce Planning for Re-Assembly Factories

Authors:
ISSN-Print
1436-4980
ISSN-Online
1436-4980
Preview:

A core element of the upgrade circular economy is the re-assembly, which focuses on integrating new functionalities into the product after the user cycle, allowing it to enter a new lifecycle. However, re-assembly entails inherent uncertainties that fundamentally change the planning paradigm of workforce planning in factories. This paper outlines a concept on workforce planning for re-assembly factories that reduces deviations while increasing flexibility and responsiveness.

Bibliography

  1. [1] Ministère de la Transition Écologique: Instructions manual for the display and the calculation of the repairability index of electrical and electronic equipments. Stand: 28.06.2022. Internet: www.ecologie.gouv.fr/sites/default/files/documents/220523_instructions%20manual%20-%20repairability%20index%20-%20final%20V3.0.pdf. Zugriff am 16.01.2026 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  2. [2] Verein Deutscher Ingenieure: VDI 2243. Recyclingorientierte Produktentwicklung. Ausgabe 2002–07 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  3. [3] International Electrotechnical Commission: IEC 62430:2019. Environmentally Conscious Design (ECD) – Principles, requirements and guidance Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  4. [4] CEN-CENELEC: EN 45558:2019. General Method to Declare the Use of Critical Raw Materials in Energy Related Products. Ausgabe 2019 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  5. [5] International Electrotechnical Commission: IEC 62474. Material Declaration for Products of and for the Electrotechnical Industry. Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  6. [6] Franke, J.; Wang, L.; Bock, K. et al.: Electronic Module Assembly. CIRP Annals 70 (2021) 2, pp. 471–493 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  7. [7] Jiang, N.; Zhang, L.; Liu, Z. Q. et al.: Reliability Issues of Lead-Free Solder Joints in Electronic Devices. Science and Technology of Advanced Materials 20 (2019) 1, pp. 876–901 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  8. [8] IPC: IPC-7711/7721D. Rework, Modification and Repair of Electronic Assemblies. Stand: 2023. Internet: www.electronics.org/TOC/IPC-7711D-7721D_TOC.pdf. Zugriff am 13.01.2026 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  9. [9] Gupta, A.; Yadav, O. P.; DeVoto, D. et al.: A Review of Degradation Behavior and Modeling of Capacitors: Preprint. Report-Nr.: NREL/CP-5400–71386. Internet: docs.nrel.gov/docs/fy19osti/71386.pdf. Zugriff am 13.01.2026 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  10. [10] Bovea, M. D.; Pérez-Belis, V.: Identifying Design Guidelines to Meet the Circular Economy Principles: A Case Study on Electric and Electronic Equipment. Journal of Environmental Management 228 (2018), pp. 483–494 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  11. [11] Bocken, N. M.; De Pauw, I.; Bakker, C. et al.: Product Design and Business Model Strategies for a Circular Economy. Journal of Industrial and Production Engineering 33 (2016) 5, pp. 308–320 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  12. [12] Den Hollander, M. C.; Bakker, C. A.; Hultink, E. J.: Product Design in a Circular Economy: Development of a Typology of Key Concepts and Terms. Journal of Industrial Ecology 21 (2017) 3, pp. 517–525. Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  13. [13] Kirchherr, J.; Reike, D.; Hekkert, M.: Conceptualizing the Circular Economy: An Analysis of 114 Definitions. Resources, Conservation and Recycling 127 (2017), pp. 221–232 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  14. [14] Kummerl, S.; Sreenivasan, K.; Paku, V. et al.: Freeze Frame Reflow to Enhance Yields for Advanced Low-Profile Bottom Terminated Packages. Journal of Surface Mount Technology 36 (2023) 3, pp. 2–10 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  15. [15] Europäische Union: Verordnung (EU) 2024/1781 (Ecodesign for Sustainable Products Regulation). Digitaler Produktpass. Internet: eur-lex.europa.eu/eli/reg/2024/1781/oj. Zugriff am 13.01.2026 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  16. [16] GS1: GS1 Digital Link. Standard. Internet: www.gs1.org/standards/gs1-digital-link. Zugriff am 10.01.2026 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  17. [17] GS1: EPCIS und Core Business Vocabulary (CBV). Standard. Internet: www.gs1.org/standards/epcis. Zugriff am 10.01.2026 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  18. [18] GS1: Sunrise 2027. Get Ready for GS1 Sunrise 2027. Stand: 2026. Internet: www.gs1us.org/industries-and-insights/by-topic/sunrise-2027. Zugriff am 16.01.2026 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  19. [19] GS1 in Europe: GS1 Standards enabling the EU digital product passport. Release 2.2. Stand: January 2025. Internet:gs1.eu/wp-content/uploads/2024/12/GS1-Standards-Enabling-DPP.pdf. Zugriff am 16.01.2026 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  20. [20] Europäische Union: Richtlinie (EU) 2024/1799 vom 13. Juni 2024 über gemeinsame Vorschriften zur Förderung der Reparatur von Waren. Internet: eur-lex.europa.eu/eli/dir/2024/1799/oj. Zugriff am 13.01.2026 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  21. [21] Europäische Union: Richtlinie 2012/19/EU vom 4. Juli 2012 über Elektro- und Elektronik-Altgeräte (WEEE) (Neufassung). Internet: eur-lex.europa.eu/legal-content/EN/TXT/?uri=celex%3A32012L0019. Zugriff am 13.01.2026 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  22. [22] Europäische Union: Richtlinie 2011/65/EU vom 8. Juni 2011 zur Beschränkung der Verwendung bestimmter gefährlicher Stoffe in Elektro- und Elektronikgeräten (RoHS) (Neufassung). Internet: eur-lex.europa.eu/eli/dir/2011/65/2025–01–01/eng. Zugriff am 10.01.2026. Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  23. [23] CEN-CENELEC: Ecodesign, Labelling and Traceability of Products. Material Efficiency – Focus on the Design. Internet:/www.cencenelec.eu/areas-of-work/cen-cenelec-topics/ecodesign-labelling-and-traceability-of-products/material-efficiency/. Zugriff am 16.01.2026 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  24. [24] CEN-CENELEC: EN 45560:2024. Method to Achieve Circular Designs of Products. Internet: standards.iteh.ai/catalog/standards/clc/7054bf1f-8e0b-40e8-b8ef-2cfd1424a603/en-45560–2024. Zugriff am 16.01.2026 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  25. [25] International Electrotechnical Commission: IEC 63365:2022. Industrial process measurement, control and automation – Digital nameplate. Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  26. [26] Zadeh, L. A.: Fuzzy Sets. Information and Control 8 (1965) 3, pp. 338–353 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  27. [27] Mamdani, E. H.; Assilian, S.: An Experiment in Linguistic Synthesis with a Fuzzy Logic Controller. International Journal of Human-Computer Studies 51 (1999) 2, pp. 135–147 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  28. [28] Buckley, J. J.: Fuzzy Hierarchical Analysis. Fuzzy Sets and Systems 17 (1985) 3, pp. 233–247 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  29. [29] Schmid, K.: Qualitative dynamische Modelle für das Verhalten von Hochtemperatur-Brennstoffzellen. Düsseldorf: VDI-Verlag 2003 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  30. [30] Braun, A.; Schullerus, G.; Ruzicic, N. et al.: Electronics Design for Circularity Using a Fuzzy Decision Making System. 23rd International Conference on Research and Education in Mechatronics (REM 2025), Paris, 2025, pp. 1–6 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  31. [31] Linder, M.; Boyer, R. H.; Dahllöf, L. et al.: Product-Level Inherent Circularity and its Relationship to Environmental Impact. Journal of Cleaner Production 260 (2020), #121096 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  32. [32] Sánchez, D.; Proske, M.; Baur, S. J.: Life Cycle Assessment of the Fairphone 4. Berlin: Fraunhofer IZM, 2022 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  33. [33] Ebert, T.; Jayanathan, S.; Cuccaro, L. et al.: Product Design Strategies for Decarbonization and Resource Efficiency. Electronics Goes Green 2024+ (EGG), Berlin, 2024, pp. 1–6 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-6
  34. [1] GS1: GS1 Global Traceability Standard. GS1’s framework for the design of interoperable traceability systems for supply chains. Stand: 2017. Internet: ref.gs1.org/standards/global-traceability/. Zugriff am 02.02.2026 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-12
  35. [2] McFarlane, D.; Sheffi, Y.: The Impact of Automatic Identification on Supply Chain Operations. The International Journal of Logistics Management 14 (2003) 1, pp. 1–17 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-12
  36. [3] Wilsky, P.; Franke, F.; Fischer, D. et al.: Technologiekombinationen zur Identifikation und Lokalisierung in der Produktion. Zeitschrift für wirtschaftlichen Fabrikbetrieb 117 (2022) 11, S. 768–772 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-12
  37. [4] Hippenmeyer, H.; Moosmann, T.: Automatische Identifikation für Industrie 4.0. Wiesbaden: Springer Vieweg 2016 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-12
  38. [5] Künster, N.; Dorka, F.; Hentsch, M. et al.: An Architecture for information consistent identification systems in circular value creation. Procedia CIRP 130 (2024), pp. 1617–1622 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-12
  39. [6] Adisorn, T.; Tholen, L.; Götz, T.: Towards a Digital Product Passport Fit for Contributing to a Circular Economy. Energies 14 (2021) 8, #2289 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-12
  40. [7] Aitken, J.; Childerhouse, P.; Towill, D.: The impact of product life cycle on supply chain strategy. International Journal of Production Economics 85 (2003) 2, pp. 127–140 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-12
  41. [8] Dietrich, F.; Louw, L.; Palm, D.: Blockchain-Based Traceability Architecture for Mapping Object-Related Supply Chain Events. Sensors (Basel, Switzerland) 23 (2023) 3, #1410 doi.org/10.3390/s23031410 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-12
  42. [9] Abeyratne, S. A.; Monfared, R.: Blockchain ready manufacturing supply chain using distributed ledger. International Journal of Research in Engineering and Technology 05 (2016) 09, pp. 1–10 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-12
  43. [10] Wang, Y.; Han, J. H.; Beynon-Davies, P.: Understanding blockchain technology for future supply chains: a systematic literature review and research agenda. Supply Chain Management: An International Journal 24 (2019) 1, pp. 62–84 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-12
  44. [11] Casino, F.; Dasaklis, T. K.; Patsakis, C.: A systematic literature review of blockchain-based applications: Current status, classification and open issues. Telematics and Informatics 36 (2019), pp. 55–81 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-12
  45. [12] Tapscott, D.; Tapscott, A.: Blockchain revolution: how the technology behind bitcoin is changing money, business, and the world. New York: Portfolio / Penguin 2016 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-12
  46. [13] Dietrich, F.: A Systematic Literature Review of Blockchain-Based Traceability Solutions. Hannover: publish-Ing 2023 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-12
  47. [14] Yiu, N. C. K.: Toward Blockchain-Enabled Supply Chain Anti-Counterfeiting and Traceability. Future Internet 13 (2021) 4, #86 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-12
  48. [15] Künster, N.; Schmitt, F.; Palm, D.: Erfolgsfaktoren für Blockchain Anwendungen in modernen Lieferketten. wt Werkstattstechnik online 115 (2025) 01–02, S. 66–71. Internet: www.werkstattstechnik.de. Düsseldorf: VDI Fachmedien Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-12
  49. [16] Ezzat, S. K.; Saleh, Y. N. M.; Abdel-Hamid, A. A.: Blockchain Oracles: State-of-the-Art and Research Directions. IEEE Access 10 (2022), pp. 67551–67572 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-12
  50. [1] Dachev, D.; Kazilas, M.; Alfano, G. et al.: Towards Reliable Adhesive Bonding: A Comprehensive Review of Mechanisms, Defects, and Design Considerations. Materials (Basel, Switzerland) 18 (2025) 12, #2724, doi.org/10.3390/ma18122724 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-19
  51. [2] Sundaram, S.; Zeid, A.: Artificial Intelligence-Based Smart Quality Inspection for Manufacturing. Micromachines 14 (2023) 3, #570, https://doi.org/10.3390/mi14030570 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-19
  52. [3] Paranjpe, N.; Uddin, M. N.; Rahman, A. S. et al.: Effects of Surface Treatment on Adhesive Performance of Composite-to-Composite and Composite-to-Metal Joints. Processes 12 (2024) 12, #2623 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-19
  53. [4] Noeske, M.; Leite Cavalcanti, W.; Brüning, H. et al.: Introduction to Recent Advances in Quality Assessment for Adhesive Bonding Technology. In: Leite Cavalcanti, W.; Brune, K.; Noeske, M. et al. (Hrsg.): Adhesive Bonding of Aircraft Composite Structures. Cham: Springer International Publishing 2021, pp. 1–50 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-19
  54. [5] Sandez, S.; Ibáñez-Forés, V.; Juan, P. et al.: The effect of repair and lifetime extension on the environmental performance of energy-using products. Application to electric water kettles. Sustainable Production and Consumption 51 (2024), pp. 445–456 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-19
  55. [6] Wei, Y.; Jin, X.; Luo, Q. et al.: Adhesively bonded joints – A review on design, manufacturing, experiments, modeling and challenges. Composites Part B: Engineering 276 (2024), #111225 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-19
  56. [7] Drury, C. G.: Inspection of sheet materials-model and data. Human factors 17 (1975) 3, pp. 257–265 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-19
  57. [8] See, J. E.: Visual inspection : a review of the literature. Sandia National Laboratories, SAND2012–8590, https://doi.org/10.2172/1055636 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-19
  58. [9] Davidor, Y.; Davies, B. L.: A vision system for the on-line quality control of adhesive beads. International Journal of Adhesion and Adhesives 8 (1988) 1, pp. 33–38 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-19
  59. [10] Prezas, L.; Michalos, G.; Arkouli, Z. et al.: AI-enhanced vision system for dispensing process monitoring and quality control in manufacturing of large parts. Procedia CIRP 107 (2022), pp. 1275–1280 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-19
  60. [11] DIN EN ISO 21368. Klebstoffe – Leitlinien für die Herstellung geklebter Strukturen und Berichtsverfahren, die für die Risikobewertung solcher Strukturen geeignet sind (ISO 21368:2022); Deutsche Fassung EN ISO 21368:2023. Ausgabe 2024–10 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-19
  61. [12] Valtchev, S. Z.; Wu, J.: Domain randomization for neural network classification. Journal of big data 8 (2021) 1, p. 94 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-19
  62. [13] Tremblay, J.; Prakash, A.; Acuna, D. et al.: Training Deep Networks with Synthetic Data: Bridging the Reality Gap by Domain Randomization. 2018 IEEE/CVF Conference on Computer Vision and Pattern Recognition Workshops (CVPRW), Salt Lake City, UT, USA, 2018, pp. 1082–10828, doi.org/10.1109/CVPRW.2018.00143 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-19
  63. [14] Varghese, R.; M., S.: YOLOv8: A Novel Object Detection Algorithm with Enhanced Performance and Robustness. 2024 International Conference on Advances in Data Engineering and Intelligent Computing Systems (ADICS), Chennai, India, 2024, pp. 1–6, https://doi.org/10.1109/ADICS58448.2024.10533619 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-19
  64. [1] Mulisch, M.; Welsch, U. (Hrsg.): Romeis – Mikroskopische Technik. Heidelberg: Springer 2015 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-26
  65. [2] Munari, E.; Scarpa, A.; Cima, L.; et al.: Cutting-edge technology and automation in the pathology laboratory. Virchows Archiv 484 (2024) 4, pp. 555–566, https://doi.org/10.1007/s00428–023–03637-z Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-26
  66. [3] Försch, S.; Klauschen, F.; Hufnagl, P. et al.: Künstliche Intelligenz in der Pathologie. Deutsches Ärzteblatt 118 (2021) 12, S. 199–204 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-26
  67. [4] Parwani, A. V. (ed.): Whole Slide Imaging: Current Applications and Future Directions. Cham: Springer International Publishing 2021 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-26
  68. [5] Ciancia, S.; Vannozzi, L.; Poliziani, A. et al.: Technologies for the Automation of Anatomic Pathology Processes: A Review. IEEE Transactions on Medical Robotics and Bionics 6 (2024) 3, pp. 888–902, https://doi.org/10.1109/TMRB.2024.3421611 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-26
  69. [6] Lopez-Ubeda, P.; Martin-Noguerol, T.; Aneiros-Fernandez, J. et al.: Natural Language Processing in Pathology. American Journal of Pathology 192 (2022) 11, pp. 1486–1495, doi.org/10.1016/j.ajpath.2022.07.012 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-26
  70. [7] Koch, D.; Kaiser, J.-P.; Stamer, F. et al.: Enhancing Visual Inspection in Remanufacturing: A Reinforcement Learning Approach with Integrated Robot Simulation. Procedia CIRP 134 (2025), pp. 939–944, https://doi.org/10.1016/j.procir.2025.02.228 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-26
  71. [8] Schlagenhauf, T.; Feuring, C.-P.; Hillenbrand, J. et al.: Camera Based Ball Screw Spindle Defect Classification System. In: Wulfsberg, J.P., Hintze, W., Behrens, B.A. (eds): Production at the Leading Edge of Technology. Heidelberg: Springer Vieweg 2019, pp. 503–512, https://doi.org/10.1007/978–3–662–60417–5_50 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-26
  72. [9] Kaiser, J. P., Enslin, C. L., Barczak, E. T., et al.: A framework for anomaly classification and segmentation in remanufacturing using autoencoders and simulated data. Procedia CIRP, 126 (2024), pp. 1005–1010, doi.org/10.1016/j.procir.2024.08.383 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-26
  73. [10] Wu, C.; Fu, H.; Kaiser, J.-P. et al.: 6D Pose Estimation on Point Cloud Data through Prior Knowledge Integration: A Case Study in Autonomous Disassembly. Procedia CIRP 122 (2024), pp. 192–198, https://doi.org/10.1016/j.procir.2024.01.028 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-26
  74. [11] Ren, S.; He, K.; Girshick, R. et al.: Faster R-CNN: Towards Real-Time Object Detection with Region Proposal Networks. arXiv 2016, https://doi.org/10.48550/arXiv.1506.01497 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-26
  75. [1] Boos, W.: Die Produktionswende – Turning Data into Sustainability. Durch das Internet of Production zu nachhaltiger Produktion und Betrieb. Werkzeugmaschinenlabor WZL der RWTH Aachen University, Aachen 2021. Internet: https://www.wzl.rwth-aachen.de/cms/wzl/Das-WZL/Presse-und-Medien/Aktuelle-Meldungen/~oixyt/Die-Produktionswende-Turning-Data-into/. Zugriff am 14.07.2023 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-34
  76. [2] Eurostat: Material flow accounts and resource productivity. Zugriff am 14.10.2025 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-34
  77. [3] Statista: CO₂-Emissionen weltweit in den Jahren 1960 bis 2023. Zugriff am 14.10.2025 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-34
  78. [4] Schuh, G.: Deutscher Werkzeugbau als „Game Changer“ – Innovative Geschäfts-modelle für Produktivitätssteigerungen im Serienprozess. 19. Internationales Kolloquium „Werkzeugbau mit Zukunft“. Aachen 2019 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-34
  79. [5] U.S. Departement of Energy: FOTW #1356, August 19, 2024: Household Vehicles Were Parked 95% on a Typical Day in 2022. Internet: www.energy.gov/eere/vehicles/articles/fotw-1356-august-19-2024-household-vehicles-were-parked-95-typical-day-2022. Zugriff am 13.10.2025 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-34
  80. [6] Cakir, A. K.: A new approach to minimize carbon emission rate in turning processes. International Journal of Low-Carbon Technologies 16 (2021), Nr. 4, S. 1444–1452 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-34
  81. [7] World Meteorological Organization: Climate change indicators reached record levels in 2023: WMO. Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-34
  82. [8] Fraunhofer Institute for Production Technology IPT: Competition Excellence in Production (EiP) 2021. Internet: www.excellence-in-production.de/. Zugriff am 10.07.2023 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-34
  83. [9] Rusche, S.; Rockstuhl, S.; Wenninger, S.: Quantifizierung unternehmerischer Nachhaltigkeit in der Fertigungsindustrie: Entwicklung eines zielorientierten Nachhaltigkeitsindex. Zeitschrift für Energiewirtschaft 45 (2021), Nr. 4, S. 317–343 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-34
  84. [10] Moldavska, A.; Welo, T.: A Holistic approach to corporate sustainability assessment: Incorporating sustainable development goals into sustainable manufacturing performance evaluation. Journal of Manufacturing Systems 50 (2019), S. 53–68 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-34
  85. [11] Garbie, I. H.: Integrating sustainability assessments in manufacturing enterprises: a framework approach. International Journal of Industrial and Systems Engineering 20 (2015), Nr. 3, S. 343–368 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-34
  86. [12] Barletta, I.; Despeisse, M.; Hoffenson, S. et al.: Organisational sustainability readiness: A model and assessment tool for manufacturing companies. Journal of Cleaner Production 284 (2021), S. 125404 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-34
  87. [13] Saad, M. H.; Nazzal, M. A.; Darras, B. M.: A general framework for sustainability assessment of manufacturing processes. Ecological Indicators 97 (2019), S. 211–224 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-34
  88. [14] Boos, W.; Lukas, G.; Kenfenheur, J. et al.: Approach For Defining Of A Target Vision For A Sustainable Tool Manufacturing And Its Linkage To The Success Factors (2025). Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-34
  89. [1] Ellen MacArthur Foundation: Towards the circular economy (2013) Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  90. [2] He, R.; Le Luo; Shamsuddin, A. et al.: Corporate carbon accounting: a literature review of carbon accounting research from the Kyoto Protocol to the Paris Agreement. Accounting & Finance 62 (2022) 1, S. 261–298 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  91. [3] Hsiang, S.; Kopp, R.; Jina, A. et al.: Estimating economic damage from climate change in the United States. Science (New York, N.Y.) 356 (2017) 6345, pp. 1362–1369 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  92. [4] Presse- und Informationsamt der Bundesregierung: Gebäude und Verkehr beim Klimaschutz stärker in der Pflicht. Stand: 31.12.2024. Internet: https://www.bundesregierung.de/breg-de/schwerpunkte/klimaschutz/eu-emisionshandel-1684508. Zugriff am 31.12.2024 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  93. [5] Potting, J.; Hekkert, M.; Worrell, E. et al.: Circular Economy: Measuring Innovation in the Prduct Chain, 2017 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  94. [6] DIN SPEC 91472: Remanufacturing (Reman) – Qualitätsklassifizeirung für zirkuläre Prozesse Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  95. [7] Schuh, G.; Mauß, W.; Potente, T. et al.: Green Re-Assembly Upgrade Factory, 2023 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  96. [8] Morgan, S. D.; Gagnon, R. J.: A systematic literature review of remanufacturing scheduling. International Journal of Production Research 51 (2013) 16, S. 4853–4879 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  97. [9] Clottey, T.: Planning and Control for Core Acquisitions from Third Parties in Remanufacturing Supply Chains. 2010 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  98. [10] Hollah, A.: Planung und Steuerung des Remanufacturing in der Elektromobilproduktion. Dissertation, Apprimus Verlag; RWTH Aachen Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  99. [11] Guide, V. R.: Production planning and control for remanufacturing: industry practice and research needs. Journal of Operations Management 18 (2000) 4, S. 467–483 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  100. [12] Kurilova-Palisaitiene, J.; Sundin, E.; Poksinska, B.: Remanufacturing challenges and possible lean improvements. Journal of Cleaner Production 172 (2018), S. 3225–3236 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  101. [13] Bochmann, L. S.: Entwicklung und Bewertung eines flexiblen und dezentral gesteuerten Fertigungssystems für variantenreiche Produkte, ETH Zurich, 2018 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  102. [14] Spath, D. (Hrsg.): Produktionsarbeit der Zukunft - Industrie 4.0. Studie. Stuttgart: Fraunhofer-Verl. 2013 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  103. [15] McKinsey and Company: HR-Monitor, 2024 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  104. [16] Burggräf, P.; Schuh, G.: Fabrikplanung. Berlin: Springer 2021 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  105. [17] Gabler Wirtschaftslexikon: Personalplanung. Internet: https://wirtschaftslexikon.gabler.de/definition/personalplanung-43721/version-267047. Zugriff am 01.01.2025 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  106. [18] Drumm, H. J.: Personalwirtschaft. Berlin: Springer 2008 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  107. [19] Oechsler, W. A.; Paul, C.: Personal und Arbeit. Einführung in das Personalmanagement. Berlin, Boston: De Gruyter Oldenbourg 2024 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  108. [20] vom Brocke, J.; Simons, A.; Niehaves, B. et al.: Reconstructing the giant: On the importance of rigour in documenting the literature search process. ECIS 2009 Proceedings (2009). Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  109. [21] Booth, A.: „Brimful of Starlite“: toward standards for reporting literature searches. Journal of the Medical Library Association: JMLA 94 (2006), Nr. 4, 421-9, e205. Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  110. [22] Stock, T.: Ein Verfahren zur Personalplanung und -steuerung und Restrukturierung der Aufbauorganisation für eine bedarfsorientierte und wandlungsfähige Produktion. Stuttgart: Fraunhofer-Verl. 2013 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  111. [23] Hämmerle, M.: Methode zur strategischen Dimensionierung der Personalflexibilität in der Produktion.Dissertation Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  112. [24] Kampker, A.; Hollah, A.; Triebs, J. et al.: Remanufacturing of electric vehicles: Evaluation of economic potential. 2019 IEEE 10th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT), Cape Town, South Africa, 2019, S. 122–127 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  113. [25] Kerin, M.; Pham, D. T.: Smart remanufacturing: a review and research framework. Journal of Manufacturing Technology Management 31 (2020) 6, S. 1205–1235 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  114. [26] Balzert, H.: Lehrbuch der Softwaretechnik: Basiskonzepte und Requirements Engineering. Heidelberg: Spektrum Akademischer Verlag 2009 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  115. [27] Fölling, C.: Komplexitätsbeherrschung durch hybride Montageplanung. Dissertation, Apprimus Verlag Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  116. [28] Bodendorf, F.: Daten- und Wissensmanagement. Berlin, Heidelberg, New York: Springer 2006 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  117. [29] Barbrook-Johnson, P.; Penn, A. S.: Systems Mapping. Cham: Springer International Publishing 2022 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  118. [30] Rumpe, B.: Agile Modellierung mit UML. Berlin: Springer 2012 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  119. [31] REFA AG: Morphologischer Kasten. Internet: https://refa.de/service/refa-lexikon/morphologischer-kasten. Zugriff am 01.01.2025 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-44
  120. [1] Gallina, V.; Steinwender, A.; Zudor, E. et al.: Business model development concept for SMEs in the era of twin transition. Procedia Computer Science 232 (2024) 1, S. 523–532 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  121. [2] Madreiter, T.; Trajanoski, B.; Martinetti, A. et al.: Sustainable Maintenance: What are the key technology drivers for ensuring Positive Impacts of Manufacturing Industries? IFAC-PapersOnLine 58 (2024) 19, S. 616–621 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  122. [3] McKinsey & Company: Capturing the true value of Industry 4.0. Stand: 13.04.2022. Internet: https://www.mckinsey.com/capabilities/operations/our-insights/capturing-the-true-value-of-industry-four-point-zero. Zugriff am 10.10.2025 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  123. [4] Ucar, A.; Karakose, M.; Kırımça, N.: Artificial Intelligence for Predictive Maintenance Applications: Key Components, Trustworthiness, and Future Trends. Applied Sciences 14 (2024) 2, S. 898 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  124. [5] Greimel, L.; Guhl, J.; Toth, D. et al.: Instandhaltung für die Positive Impact Production. ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb 119 (2024) 9, S. 653–658 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  125. [6] Matti, C.; Jensen, K.; Goran, P. et al.: Towards a fair and sustainable Europe 2050: Social and economic choices in sustainability transitions. pp. 1018-5593 (2023) Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  126. [7] Kara, S.; Hauschild, M.; Sutherland, J. et al.: Closed-loop systems to circular economy: A pathway to environmental sustainability? CIRP Annals 71 (2022) 2, S. 505–528 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  127. [8] Foundation, E. M.: The circular economy in detail. Internet: https://www.ellenmacarthurfoundation.org/the-circular-economy-in-detail-deep-dive Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  128. [9] DIN e. V.: VDI Verein Deutscher Ingenieure e.V. Deutsche Normungsroadmap Circular Economy. DKE Deutsche Kommussion Elektrotechnik Elektronik und Informationstechnik Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  129. [10] José Sobral; Luis Ferreira: The Importance of Reliability and Maintenance for the Circular Economy: from Consumers to Users. In: EUROMAINTENANCE 2018 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  130. [11] Mügge, J.; Hahn, I. R.; Riedelsheimer, T. et al.: Digital Twins for Circular Economy - Enabling Decision Support for R-Strategies. Industrie 4 0 Management 2022 (2022) 6, S. 42–46 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  131. [12] Greimel, L.; Nemeth, T.; Wiesner, J.-O. et al.: LOOP: An assessment framework for circular-oriented maintenance in product lifecycle management. Procedia CIRP 134 (2025), S. 1095–1100 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  132. [13] Schenkelberg, K.; Seidenberg, U.; Ansari, F.: Supervised Machine Learning for Knowledge-Based Analysis of Maintenance Impact on Profitability. IFAC-PapersOnLine 53 (2020) 2, S. 10651–10657 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  133. [14] Kambanou, M. L.: Life Cycle Costing: Understanding How It Is Practised and Its Relationship to Life Cycle Management - A Case Study. Sustainability 12 (2020) 8, S. 3252 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  134. [15] Fourie, C. J.; Tendayi, T. G.: A decision-making framework for effective maintenance management using life cycle costing (LCC) in a rolling stock environment. South African Journal of Industrial Engineering 27 (2016) 4 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  135. [16] Carlos A Parra: Review of the basic processes of a Maintenance and Reliability Management Model PROJECT: Design and Construction of the Third Set of Locks in the ACP (AUTORIDAD DEL CANAL DE PANAMÁ) IngeCon MWH GLOBAL. Unpublished 2015 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  136. [17] Barahmand, Z.; Eikeland, M. S.: Techno-Economic and Life Cycle Cost Analysis through the Lens of Uncertainty: A Scoping Review. Sustainability 14 (2022) 19, S. 12191 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  137. [18] Gouveia, J. R.; Pinto, S. M.; Campos, S. et al.: Life Cycle Assessment and Cost Analysis of Additive Manufacturing Repair Processes in the Mold Industry. Sustainability 14 (2022) 4, S. 2105 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  138. [19] Kerdlap, P.; Cornago, S.: Life Cycle Costing: Methodology and Applications in a Circular Economy. In: An Introduction to Circular Economy. Springer, Singapore 2021, pp. 499–525 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  139. [20] Schenkelberg, K.; Seidenberg, U.; Ansari, F.: A Simulation-based Process Model for Analyzing Impact of Maintenance on Profitability. 2020 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Vienna, Austria, 2020, S. 805–812 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  140. [21] Muchiri, P.; Pintelon, L.; Gelders, L. et al.: Development of maintenance function performance measurement framework and indicators. International Journal of Production Economics 131 (2011) 1, S. 295–302 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  141. [22] Kumar, U.; Galar, D.; Parida, A. et al.: Maintenance performance metrics: a state‐of‐the‐art review. Journal of Quality in Maintenance Engineering 19 (2013) 3, S. 233–277 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  142. [23] Madreiter, T.; Ansari, F.: From OEE to OSEE: How to reinforce Production and Maintenance Management Indicator Systems for Sustainability? IFAC-PapersOnLine 58 (2024) 8, S. 204–209 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  143. [24] Kuhlang, P.; Benter, M.; Neumann, M.; Eckart, C.: Digitalisierung der MTM-Methoden. Perspektiven zur Gestaltung produktiver und ergonomiegerechter Arbeit in Produktion und Logistik. Hamburg 2023 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  144. [25] Murel, J.; Kavlakoglu, E.: Was ist eine Konfusionsmatrix? Artificial Intelligence. Stand: 18.01.2024. Internet: https://www.ibm.com/de-de/think/topics/confusion-matrix. Zugriff am 20.10.2025 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  145. [26] Google LLC.: Classification: Accuracy, recall, precision, and related metrics. Google for Developers. Stand: 08/2025. Internet: https://developers.google.com/machine-learning/crash-course/classification/accuracy-precision-recall. Zugriff am 20.10.2025 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  146. [27] Winquist, E.; Horn, S.; Tuovila, H. et al.: R-strategies in circular economy Textile, battery, and agri-food value chains R-strategies in circular economy Textile, battery, and agri-food value chains Referencing instructions. 2025 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-50
  147. [1] Ferdows, K.: Keeping up with growing complexity of managing global operations. International Journal of Operations & Production Management 38 (2018) 2, S. 390–402 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  148. [2] Jacob, F.; Strube, G.: Why Go Global? The Multinational Imperative. In: Abele, E. (Edit.): Global production. A handbook for strategy and implementation. Berlin, Heidelberg: Springer 2008, pp. 2–33 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  149. [3] Lanza, G.; Ferdows, K.; Kara, S. et al.: Global production networks: Design and operation. CIRP Annals 68 (2019) 2, S. 823–841 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  150. [4] Friedli, T.; Lanza, G.; Remling, D.: Global Manufacturing Management. Cham: Springer International Publishing 2021 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  151. [5] Friedli, T.; Thomas, S.; Mundt, A.: Management globaler Produktionsnetzwerke. Strategie – Konfiguration – Koordination. München: Carl Hanser Verlag GmbH & Co. KG 2013 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  152. [6] Schuh, G.; Prote, J.-P.; Franken, B. et al.: Performance Drivers in Global Production Networks: Analysis of Cause and Effect Relations between Influencing Factors and Performance of Production Sites. In: 2017 Portland International Conference on Management of Engineering and Technology (PICMET) 2017, S. 1–9 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  153. [7] Lund, S.; Manyika, J.; Smit, S. et al.: Risk, resilience and rebalancing in global value chains Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  154. [8] Schollemann, A.: Strategische Ausrichtung nachhaltiger Produktionsnetzwerke. Dissertation, RWTH Aachen University, 2025 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  155. [9] Fictiv Inc.: State of Manufacturing. 2024 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  156. [10] Schuh, G.; Prote, J.-P.; Gützlaff, A. et al.: Gestaltung von Produktionsnetzwerken. Zeitschrift für wirtschaftlichen Fabrikbetrieb 114 (2019) 1-2, S. 7–10 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  157. [11] Schuh, G.; Kampker, A.: Strategie und Management produziernder Unternehmen. Berlin, Heidelberg: Springer Berlin Heidelberg 2011 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  158. [12] Abegglen, C.; Bleicher, K.: Das Konzept Integriertes Management. Visionen – Missionen – Programme, plus E-Book inside (ePub, pdf). Weinheim: Campus Verlag 2021 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  159. [13] Miedler, P.; Friedli, T.: Deriving a Network Strategy. In: Friedli, T.; Lanza, G.; Remling, D. (Hrsg.): Global Manufacturing Management. Cham: Springer International Publishing 2021, S. 87–100 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  160. [14] Meyer, T.; Jacob, F.: Network Design: Optimizing the Global Production Footprint. In: Abele, E. (Edit.): Global production. A handbook for strategy and implementation. Berlin, Heidelberg: Springer 2008, pp. 140–190 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  161. [15] Fränken, B.: Standortrollen in Produktionsnetzwerken. Aachen: Apprimus Wissenschaftsverlag 2022 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  162. [16] Christodoulou, P.: Manufacturing footprint strategy. Internet: https://www.ifm.eng.cam.ac.uk/uploads/Resources/Briefings/cim_briefing_footprints.pdf. Zugriff am 28.10.2025 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  163. [17] Schuh, G.; Schmitz, S.; Schlosser, X. T. et al.: Datenbasierte Gestaltung nachhaltiger Produktionsnetzwerke. wt Werkstattstechnik online 113 (2023) 04, S. 110–114 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  164. [18] Ays, J.: Gestaltung agiler Produktionsnetzwerke. Dissertation, Rheinisch-Westfälische Technische Hochschule Aachen; Apprimus Verlag, 2023 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  165. [19] Remling, D.; Friedli, T.: The St.Gallen Management Model for International Manufacturing Networks. In: Friedli, T.; Lanza, G.; Remling, D. (Hrsg.): Global Manufacturing Management. Cham: Springer International Publishing 2021, S. 25–50 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  166. [20] Witthohn, C.: Konfiguration globaler Produktionsnetzwerke im Spannungsfeld von Kosten- und Risikominimierung (2019) Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  167. [21] Rodemann, N.: Resiliente Produktionsnetzwerke durch datenbasierte Früherkennung. Dissertation, RWTH Aachen University, 2023 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  168. [22] Welsing, M.: Bewertung der ökologischen Nachhaltigkeit von Produktionsnetzwerkkonfigurationen. Dissertation, RWTH Aachen University, 2023 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  169. [23] Cavaciutu-Wishart, E.; Heading, S.; Kohler, K. et al.: The Global Risks Report 2024 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  170. [24] Janssen, B.; Schuh, G.; Schmitz, S. et al.: Analysis of vulnerabilities in global production networks through disruption simulation, Cambridge International Manufacturing Symposium, Cambridge, 2024 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  171. [25] Buß, D.; Gebauer, H.; Glawar, R. et al.: Resiliente Wertschöpfung in der produzierenden Industrie – innovativ, erfolgreich, krisenfest. 2021 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  172. [26] Sihvonen, S.; Ritola, T.: Conceptualizing ReX for Aggregating End-of-life Strategies in Product Development. Procedia CIRP 29 (2015), S. 639–644 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  173. [27] Almelhem, M.; Buics, L.; Süle, E.: Effectiveness and Role of Reverse Logistics Operations in Supply Chain Management (2024) Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  174. [28] Van Ha, N. T.: Development of Reverse Logistics – Adaptability and Transferability, TU Darmstadt, 2012 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  175. [29] Dore, S.; Gallo, A.: Circular Economy and Reverse Logistics: An Analysis of Sustainable Business Models. In: S. 495–511 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  176. [30] Hajar, R.: The Contribution of Reverse Logistics Practices in Circular Economy Principles: A TOWS Analysis. IFAC-PapersOnLine 58 (2024) 13, S. 733–738 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  177. [31] Ellen MacArthur Foundation: The butterfly diagram: visualising the circular economy. Zugriff am 29.09.2025 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  178. [32] Rahiminia, M.; Razmi, J.; Shahrabi Farahani, S. et al.: Cluster-based supplier segmentation: a sustainable data-driven approach. Modern Supply Chain Research and Applications 5 (2023) 3, S. 209–228 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  179. [33] Benfer, M.; Verhaelen, B.; Peukert, S. et al.: Resilience Measures in Global Production Networks: A Literature Review and Conceptual Framework. Die Unternehmung 75 (2021) 4, S. 491–520 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  180. [34] Yau, N.: Visualize this. The FlowingData guide to design, visualization, and statistics. Indianapolis, IN: Wiley Pub 2011 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  181. [35] Prote, J.-P.: Verursachungsgerechte Bewertung von Standortalternativen in Produktionsnetzwerken. Dissertation, RWTH Aachen University, 2018 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  182. [36] Schuh, G.; Gützlaff, A.; Hast, K. et al.: Performance Measurement in Global Production Networks to Identify Knowledge Transfer Needs Using Statistical Process Control (2021) Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  183. [37] Hast, K.: Datenbasiertes Lernen in Produktionsnetzwerken. Aachen: Apprimus Wissenschaftsverlag 2021 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  184. [38] Kaiser, J.; Remling, D.: Managing International Manufacturing Networks in Today’s Business Environment. In: Friedli, T.; Lanza, G.; Remling, D. (Hrsg.): Global Manufacturing Management. Cham: Springer International Publishing 2021, S. 63–76 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  185. [39] Buess, P.: Enabling Data-Based Applications in Manufacturing. In: Friedli, T.; Lanza, G.; Remling, D. (Hrsg.): Global Manufacturing Management. Cham: Springer International Publishing 2021, S. 189–202 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  186. [40] Cremer, S.: Controlling der Migration in Produktionsnetzwerken. Dissertation, Apprimus Verlag; Rheinisch-Westfälische Technische Hochschule Aachen, 2022 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  187. [41] Gartzen, T.: Diskrete Migration als Anlaufstrategie für Montagesysteme. Aachen: Apprimus-Verl. 2012 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  188. [42] Neuner, C.: Konfiguration internationaler Produktionsnetzwerke unter Berücksichtigung von Unsicherheit. Wiesbaden: Gabler 2009 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  189. [43] Reuter, C.; Prote, J.-P.; Schmitz, T. et al.: Ermittlung eines strategischen Migrationsplans für globale Produktionsnetzwerke. Zeitschrift für wirtschaftlichen Fabrikbetrieb 110 (2015) 7-8, S. 425–428 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  190. [44] van Wyck, J.; Philips, K.; Gilbert, M. et al.: Harnessing the Tectonic Shifts in Global Manufacturing. Internet: https://web-assets.bcg.com/c1/e8/abe84fe44b189226b0a69251af24/harnessing-the-tectonic-shifts-in-global-manufacturing-sep-2023.pdf Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-59
  191. [1] Kersten, W.; Seiter, M.; See, B. von et al.: Trends and Strategies in Logistics and Supply Chain Management. Digital Transformation Opportunities. Bremen: DVV Media 2017 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  192. [2] Nyhuis, P.; Schmidt, M.: Logistische Modelle der innerbetrieblichen Lieferkette. Berlin, Heidelberg: Springer Berlin Heidelberg 2025. Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  193. [3] Gottmann, J.: Produktionscontrolling. Wertströme und Kosten optimieren. Wiesbaden, Heidelberg: Springer Gabler 2019 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  194. [4] Haertel, L.: Modellbasierte Datenanalyse zur Identifikation logistischer Schwachstellen in Produktionsbereichen. Dissertation, Gottfried Wilhelm Leibniz Universität Hannover, IFA, Hannover 2021. Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  195. [5] Wiendahl, H.-P.; Wiendahl, H.-H.: Betriebsorganisation für Ingenieure. München: Hanser 2019 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  196. [6] Horváth, P.; Gleich, R.; Seiter, M.: Controlling. München: Verlag Franz Vahlen 2020 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  197. [7] Hannula, M.: Total productivity measurement based on partial productivity ratios. International Journal of Production Economics 78 (2002), Nr. 1, S. 57–67 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  198. [8] Schmidt, M.; Nyhuis, P.: Produktionsplanung und -steuerung im Hannoveraner Lieferkettenmodell. Berlin, Heidelberg: Springer Berlin Heidelberg 2021 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  199. [9] Glöckner, R.: Entwicklung eines Gesamtmodells der Arbeitsproduktivität und der logistischen Zielgrößen, Technische Universität Hamburg, Hamburg 2020 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  200. [10] Schnell, H.: Produktionscontrolling: Selbstverständnis, Aufgaben und Instrumente. In: Klein, A. (Hrsg.): Modernes Produktionscontrolling für die Industrie 4.0, S. 21–40. Haufe Lexware 2018 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  201. [11] Steven, M.: Produktionscontrolling. Stuttgart: W. Kohlhammer GmbH 2016 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  202. [12] Helmold, M.; Laub, T.; Flashar, B. et al.: Qualität neu denken. Wiesbaden: Springer Fachmedien Wiesbaden 2023 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  203. [13] Gutenberg, E.: Einführung in die Betriebswirtschaftslehre. Die Wirtschaftswissenschaften (1958), Nr. 15, S. 31–63 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  204. [14] Islam, S.; Syed Shazali, S. T.: Determinants of manufacturing productivity: pilot study on labor‐intensive industries. International Journal of Productivity and Performance Management 60 (2011), Nr. 6, S. 567–582 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  205. [15] Rutkauskas, J.; Paulavičienė, E.: Concept of Productivity in Service Sector. Engineering Economics 3 (2005), Nr. 43, S. 29–34 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  206. [16] Günter, A.; Gopp, E.: Overview and classification of approaches - Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  207. [17] to productivity measurement. International Journal of Productivity and Performance Management (2020), S. 1212–1229 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  208. [18] Nakajima, S.: Management der Produktionseinrichtungen. Frankfurt/Main: Campus-Verlag 1995 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  209. [19] Focke, M.; Steinbeck, J.: Steigerung der Anlagenproduktivität durch OEE-Management. Wiesbaden: Springer Fachmedien Wiesbaden 2024. Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  210. [20] Kletti, J.; Rieger, J.: Die perfekte Produktion. Wiesbaden: Springer Fachmedien Wiesbaden 2022 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  211. [21] Al-Radhi, M.: Total Productive Management (TPM). In: Kamiske, G. F. (Hrsg.): Handbuch QM-Methoden. Die richtige Methode auswählen und erfolgreich umsetzen, S. 97–130. München: Hanser 2013 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  212. [22] Erlach, K.: Wertstromdesign. Berlin, Heidelberg: Springer Berlin Heidelberg 2020 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  213. [23] Andrade, J. J. .; Dreher Silveira, D.: Application of OEE for productivity analysis: a case study of a production line from the pulp and paper industry. DYNA 86 (2019), Nr. 211, S. 9–16 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  214. [24] Ahmad, N.; Hossen, J.; Ali, S. M.: Improvement of overall equipment efficiency of ring frame through total productive maintenance: a textile case. The International Journal of Advanced Manufacturing Technology 94 (2018), 1-4, S. 239–256 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  215. [25] Kapuyanyika, M.; Suthar, K.: To Improve the Overal Equipment Effectiveness of Wheel Surface Machining Plant of Railway Using Total Productive Maintenance (2018), S. 1860–1874 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  216. [26] Fam, S.-F.; Loh, S. L.; Haslinda, M. et al.: Overall Equipment Efficiency (OEE) Enhancement in Manufacture of Electronic Components & Boards Industry through Total Productive Maintenance Practices. MATEC Web of Conferences 150 (2018), S. 5037 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  217. [27] Rozak, A.; Jaqin, C.; Hasbullah, H.: Increasing Overall Equipment Effectiveness in Automotive Company Using DMAIC and FMEA Method. Journal Européen des Systèmes Automatisés 53 (2020), Nr. 1, S. 55–60 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  218. [28] Hibarkah Kurnia, Choesnul Jaqin, Humiras Hardi Purba: The PDCA Approach with OEE Methods for Increasing Productivity in the Garment Industry The PDCA Approach with OEE Methods for Increasing Productivity in the Garment Industry (2022), Vol. 10, S. 57–68 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  219. [29] Kang, N.; Zhao, C.; Li, J. et al.: A Hierarchical structure of key performance indicators for operation management and continuous improvement in production systems. International journal of production research 54 (2016), Nr. 21, S. 6333–6350 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  220. [30] Ungermann, F.; Kuhnle, A.; Stricker, N. et al.: Data Analytics for Manufacturing Systems – A Data-Driven Approach for Process Optimization. Procedia CIRP 81 (2019), S. 369–374 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  221. [31] Lucantoni, L.; Antomarioni, S.; Ciarapica, F. E. et al.: A rule-based machine learning methodology for the proactive improvement of OEE: a real case study. International Journal of Quality & Reliability Management 41 (2024), Nr. 5, S. 1356–1376 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  222. [32] Freibichler, W.; Stiehl, A.: Praxishandbuch Operative Wertsteigerung. Berlin, Heidelberg: Springer Berlin Heidelberg 2018 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  223. [33] Koether, R.; Meier, K.-J.: Lean Production für die variantenreiche Einzelfertigung. Wiesbaden: Springer Fachmedien Wiesbaden 2020 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  224. [34] Lotter, B.; Wiendahl, H.-P.: Montage in der industriellen Produktion. Berlin, Heidelberg: Springer Berlin Heidelberg 2012 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  225. [35] Reichel, J.; Müller, G.; Haeffs, J.: Betriebliche Instandhaltung. Berlin, Heidelberg: Springer Berlin Heidelberg 2018 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  226. [36] Benes, G.; Groh, P.: Grundlagen des Qualitätsmanagements. 5., überarbeitete Auflage. München: Carl Hanser Verlag GmbH & Co. KG 2022 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-70
  227. [1] Franzkoch, B.; Gottschalk, S.: Anlauforganisation. In: Schuh, G.; Stölzle, W.; Straube, F. (Hrsg.): Anlaufmanagement in der Automobilindustrie erfolgreich umsetzen. Ein Leitfaden für die Praxis. Heidelberg: Springer 2008, S. 55–64 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  228. [2] Mourtzis, D.: Challenges and future perspectives for the life cycle of manufacturing networks in the mass customisation era. Logistics Research 9 (2016) 1, pp. 1–20 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  229. [3] Kuhn, A. (Hrsg.): „Fast ramp up“. Schneller Produktionsanlauf von Serienprodukten. Dortmund: Verlag Praxiswissen 2002 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  230. [4] Holweg, M.; Pil, F. K.: The Second Century: Reconnecting Customer and Value Chain through Build-to-Order Moving beyond Mass and Lean Production in the Auto Industry. Cambridge/USA: The MIT Press 2004 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  231. [5] Fleischer, J.; Spath, D.; Lanza, G.: Qualitätssimulation im Serienanlauf. Vorbestimmte Qualitätsfähigkeitskurven von Elementarprozessen. wt Werkstattstechnik online 93 (2003) 01/02, S. 50–54. Düsseldorf: VDI Fachmedien, 2003, https://doi.org/10.37544/1436-4980-2003-1-2 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  232. [6] Karafyllis, N. C.: Soziotechnisches System. In: Liggieri, K.; Müller, O. (Hrs.): Mensch-Maschine-Interaktion. Stuttgart: J.B. Metzler 2019, S. 300–303 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  233. [7] Hinrichs, M. P.; Schmitt, R. H.: Qualitätssicherung für die Serienfreigabe im Produktionsanlauf. Ein modellgestützter Ansatz zur Risikobewertung von validierungsrelevanten Produktionswechselwirkungen am Beispiel der Automobilindustrie. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb 119 (2024) 4, S. 205–209 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  234. [8] Schuh, G.; Stölzle, W.; Straube, F. (Hrsg.): Anlaufmanagement in der Automobilindustrie erfolgreich umsetzen. Ein Leitfaden für die Praxis. Heidelberg: Springer 2008 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  235. [9] Laick, T.: Hochlaufmanagement: sicherer Produktionshochlauf durch zielorientierte Gestaltung und Lenkung des Produktionsprozesssystems. Dissertation, Universität Kaiserslautern, 2003 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  236. [10] Schuh, G.; Desoi, J.-C.; Tücks, G.: Holistic Approach for Production Ramp-Up in Automotive Industry. In: Bramley, A.; Brissaud, D.; Coutellier, D. et al. (Hrsg.): Advances in Integrated Design and Manufacturing in Mechanical Engineering. Heidelberg: Springer-Verlag 2005, pp. 255–268 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  237. [11] Surbier, L.; Alpan, G.; Blanco, E.: A comparative study on production ramp-up: state-of-the-art and new challenges. Production Planning & Control 25 (2014) 15, pp. 1264–1286 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  238. [12] Heraud, J.; Medini, K.; Andersen, A.-L.: Managing agile ramp-up projects in manufacturing – Status quo and recommendations. CIRP Journal of Manufacturing Science and Technology 45 (2023), pp. 125–137 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  239. [13] Nagel, J.: Risikoorientiertes Anlaufmanagement. Wiesbaden: Gabler 2011 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  240. [14] Urban, G.; Seiter, M.: Fragestellungen zum Produktionsanlauf. Industrie Management 20 (2004) 4, S. 57–59 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  241. [15] Wiendahl, H.-P.; Hegenscheidt, M.; Winkler, H.: Anlaufrobuste Produktionssysteme. wt Werkstattstechnik online 92 (2002) 11/12, S. 650–655. Düsseldorf: VDI Fachmedien, 2002. https://doi.org/10.37544/1436-4980-2002-11-12 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  242. [16] Schuh, G.; Gartzen, T.; Wagner, J.: Complexity-oriented ramp-up of assembly systems. CIRP Journal of Manufacturing Science and Technology 10 (2015), pp. 1–15 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  243. [17] Haller, J.; Kumar, B.; Göppert, A. et al.: A System Dynamics Stability Model for Discrete Production Ramp-Up. Systems 12 (2024) 12, pp. 1–19 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  244. [18] Mccreery, J. K.; Krajewski, L. J.: Improving performance using workforce flexibility in an assembly environment with learning and forgetting effects. International Journal of Production Research 37 (1999) 9, pp. 2031–2058 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  245. [19] Dombrowski, U.; Wullbrandt, J.; Krenkel, P.: Industrie 4.0 in production ramp-up management. Procedia Manufacturing 17 (2018), pp. 1015–1022 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  246. [20] Fast-Berglund, Å.; Fässberg, T.; Hellman, F. et al.: Relations between complexity, quality and cognitive automation in mixed-model assembly. Journal of Manufacturing Systems 32 (2013) 3, pp. 449–455 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  247. [21] Wright, T. P.: Factors Affecting the Cost of Airplanes. Journal of the Aeronautical Sciences 3 (1936) 4, pp. 122–128 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  248. [22] Yelle, L. E.: The Leaning Curve: Histrocal Review and Comprehensive Survey. Decision Sciences 10 (1979) 2, pp. 302–328 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  249. [23] Anzanello, M. J.; Fogliatto, F. S.: Learning curve models and applications: Literature review and research directions. International Journal of Industrial Ergonomics 41 (2011) 5, pp. 573–583 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  250. [24] Globerson, S.: Incorporating Forgetting into Learning Curves. International Journal of Operations & Production Management 7 (1987) 4, pp. 80–94 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  251. [25] Nembhard, D. A.; Osothsilp, N.: An empirical comparison of forgetting models. IEEE Transactions on Engineering Management 48 (2001) 3, pp. 283–291 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  252. [26] Ostermeier, F. F.; Deuse, J.: Modelling forgetting due to intermittent production in mixed-model line scheduling. Flexible Services and Manufacturing Journal 36 (2024) 2, pp. 503–532 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  253. [27] Denkena, B.; Dittrich, M. A.; Winter, F. et al.: Simulation-based planning and evaluation of personnel scheduling in knowledge-intensive production systems. Production Engineering 10 (2016) 4–5, pp. 489–496 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  254. [28] Denkena, B.; Stobrawa, S.; Jenkner, I.: Kompetenzorientierte Arbeitsplatzwechsel. Ein simulationsbasierter Ansatz zur Durchführung von Jobrotation unter Berücksichtigung von Kompetenzen für die Personaleinsatzplanung von Industrieunternehmen. Zeitschrift für wirtschaftlichen Fabrikbetrieb 112 (2017) 10, S. 640–643 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  255. [29] Mlekus, L.; Maier, G. W.: More Hype Than Substance? A Meta-Analysis on Job and Task Rotation. Frontiers in psychology 12 (2021), pp. 1–18 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  256. [30] [30] Ast, J.: Risikoabhängige Bestimmung der funktionellen Personalflexibilität in Montagesystemen. Dissertation, Leibniz Universität Hannover, 2023 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  257. [31] Dar-El, E. M.; Ayas, K.; Gilad, I.: A dual-phase model for the individual learning process in industrial tasks. IIE Transactions 27 (1995) 3, pp. 265–271 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  258. [32] Framinan, J. M.; Leisten, R.; Ruiz García, R.: Manufacturing Scheduling Systems. London: Springer 2014 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  259. [33] Torraco, R. J.: Writing Integrative Literature Reviews: Guidelines and Examples. Human Resource Development Review 4 (2005) 3, pp. 356–367 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  260. [34] Snyder, H.: Literature review as a research methodology: An overview and guidelines. Journal of Business Research 104 (2019), pp. 333–339 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  261. [35] Nembhard, D. A.; Uzumeri, M. V.: Experiential learning and forgetting for manual and cognitive tasks. International Journal of Industrial Ergonomics 25 (2000) 4, pp. 315–326 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  262. [36] [36] Jong, J. R. De: The Effects of Increasing Skill On Cycle Time And Its Consequences For Time Standards. Ergonomics 1 (1957) 1, pp. 51–60 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  263. [37] Marangé, P.; Lemoine, D.; Aubry, A. et al.: Coupling Robust Optimization and Model-Checking Techniques for Robust Scheduling in the Context of Industry 4.0. In: Sokolov, B.; Ivanov, D.; Dolgui, A. (Hrsg.): Scheduling in Industry 4.0 and Cloud Manufacturing. Cham: Springer International Publishing 2020, pp. 103–124 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  264. [38] Mourtzis, D.: Challenges and future perspectives for the life cycle of manufacturing networks in the mass customisation era. Logistics Research 9 (2016) 1, pp. 1–20 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  265. [39] Lennartson, B.; Bengtsson, K.; Yuan, C. et al.: Sequence Planning for Integrated Product, Process and Automation Design. IEEE Transactions on Automation Science and Engineering 7 (2010) 4, pp. 791–802 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  266. [40] Cohen, Y.: Absenteeism as a major cause of bottlenecks in assembly lines. International Journal of Production Research 50 (2012) 21, pp. 6072–6080 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  267. [41] Arthur, W.; Bennett, W.; Edens, P. pp. et al.: Effectiveness of training in organizations: a meta-analysis of design and evaluation features. The Journal of applied psychology 88 (2003) 2, pp. 234–245 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  268. [42] Aguinis, H.; Kraiger, K.: Benefits of training and development for individuals and teams, organizations, and society. Annual review of psychology 60 (2009), pp. 451–474 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  269. [43] [Buck, H.; Witzgall, E.: Mitarbeiterqualifizierung in der Montage. In: Lotter, B.; Wiendahl, H.-P. (Hrsg.): Montage in der industriellen Produktion. Heidelberg: Springer 2012, S. 397–417 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  270. [44] Li, G.; Rajagopalan, S.: The impact of quality on learning. Journal of Operations Management 15 (1997) 3, pp. 181–191 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  271. [45] Argote, L.: Organizational learning. Creating, retaining and transferring knowledge. New York: Springer 2013 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  272. [46] Jorgensen, M.; Davis, K.; Kotowski, S. et al.: Characteristics of job rotation in the Midwest US manufacturing sector. Ergonomics 48 (2005) 15, pp. 1721–1733 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-80
  273. [1] Lukić, S.; Jovanić, P.: Structural analysis of abrasive composite materials with nonwoven textile matrix. Materials Letters 58 (2004) 3–4, pp. 439–443 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-89
  274. [2] Magazine, M.: Finishing via Non-Woven Abrasives. MetalForming Magazine. Stand: 01.04.2017. Internet: www.metalformingmagazine.com/article/?/finishing/grinding/finishing-via-non-woven-abrasives. Zugriff am 14.01.2026 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-89
  275. [3] Research and Markets ltd.: Nonwoven Abrasives Market – Global Forecast 2026–2032. Stand: 08.07.2025. Internet:www.researchandmarkets.com/reports/4968583/nonwoven-abrasives-market-by-form-end-use. Zugriff am 16.01.2026 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-89
  276. [4] H. Günther Falkenrich GmbH: Technology. Internet: www.falkenrich.de/en/technology#J. Zugriff am am 14.01.2026 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-89
  277. [5] Sabarinathan, P.; Annamalai, V. E.; Xavier Kennedy, A.: On the use of grains recovered from spent vitrified wheels in resinoid applications. Journal of Material Cycles and Waste Management 22 (2020) 1, pp. 197–206 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-89
  278. [6] Sabarinathan, P.; Annamalai, V. E.; Rajkumar, K.: Sustainable application of grinding wheel waste as abrasive for abrasive water jet machining process. Journal of Cleaner Production 261 (2020), # 121225 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-89
  279. [7] Sabarinathan, P.; Annamalai, V. E.; Vishal, K. et al.: Experimental study on removal of phenol formaldehyde resin coating from the abrasive disc and preparation of abrasive disc for polishing application. Advances in Materials Science and Engineering (2022), pp. 1–8, https://doi.org/10.1155/2022/6123160 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-89
  280. [8] Eriksson, O.; Finnveden, G.: Plastic waste as a fuel – CO2-neutral or not? Energy & Environmental Science 2 (2009) 9, #907, https:// Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-89
  281. [9] doi.org/10.1039/B908135F Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-89
  282. [10] Pappa, G.; Boukouvalas, C.; Giannaris, C. et al.: The selective dissolution/precipitation technique for polymer recycling: a pilot unit application. Resources, Conservation and Recycling 34 (2001) 1, pp. 33–44 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-89
  283. [11] Palaniyappan, S.; Veiravan, A.; Kumar, V. et al.: Process optimization and removal of phenol formaldehyde resin coating using mechanical erosion process. Progress in Rubber, Plastics and Recycling Technology 38 (2022) 2, pp. 141–154 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-89
  284. [12] Miller, V.: The Environmental Impact of Abrasive Wheel Usage. Stand: 16.01.2025. Internet: cpdonline.co.uk/knowledge-base/health-and-safety/environmental-impact-abrasive-wheel. Zugriff am 14.01.2026 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-89
  285. [13] Linke, B.: Life Cycle and Sustainability of Abrasive Tools. Cham: Springer International Publishing 2016 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-89
  286. [14] Linke, B.: Manufacturing and sustainability of bonding systems for grinding tools. Production Engineering 10 (2016) 3, pp. 265–276 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-89
  287. [15] Beaucamp, A.; Kirsch, B.; Zhu, W.: Advances in grinding tools and abrasives. CIRP Annals 71 (2022) 2, pp. 623–646 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-89
  288. [16] Tumkur Karnick, S.: Parameter study in the production of grinding wheels made from recycled polymer powder. Master thesis, Otto von Guericke Universität, 2023 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-89
  289. [17] Rösch, K.; Mayer, T.; Karnick, S. T.: Environmentally friendly manufacturing of grinding wheels from nonwoven abrasive waste: method and performance evaluation. The International Journal of Advanced Manufacturing Technology 140 (2025) 5–6, pp. 3015–3029 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-89
  290. [18] Pilato, L. (ed.): Phenolic Resins: A Century of Progress. Heidelberg: Springer-Verlag 2010 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-89
  291. [19] DIN EN ISO 527–1:2019–12: Kunststoffe – Bestimmung der Zugeigenschaften – Teil 1: Allgemeine Grundsätze (ISO_527–1:2019). Deutsche Fassung EN ISO 527–1:2019 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-89
  292. [20] DIN EN ISO 178:2019: Kunststoffe – Bestimmung der Biegeeigenschaften. Deutsche Fassung EN ISO 178:2019 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-89
  293. [21] Rowe, W. B.: Principles of modern grinding technology. Waltham, MA: William Andrew 2014 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-89
  294. [22] DIN EN ISO 20753:2022–07: Kunststoffe – Probekörper (ISO/DIS 20753:2022) Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-89
  295. [1] Malkin, S.; Guo, C. (eds.): Grinding technology. Theory and applications of machining with abrasives. New York: Industrial Press 2008 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-98
  296. [2] Krajnik, P.; Wegener, K.; Bergs, T. et al.: Advances in modeling of fixed-abrasive processes. CIRP Annals 73 (2024) 2, pp. 589–614, https://doi.org/10.1016/j.cirp.2024.05.001 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-98
  297. [3] DIN ISO 525: Schleifwerkzeug aus gebundenem Schleifmittel – Formen, Bezeichnung und Kennzeichnung (ISO 525: 2020). Ausgabe Januar 2022 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-98
  298. [4] DIN ISO 8486–1: Schleifkörper aus gebundenem Schleifmittel – Bestimmung und Bezeichnung von Korngrößenverteilung – Teil 1: Makrokörnungen F4 bis F220 (ISO 8486–1:1996). Ausgabe September 1997 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-98
  299. [5] Bot-Schulz, R.: Untersuchung der Reaktionen an der Schnittstelle Korn/Bindung für Sol-Gel-Korund. Dissertation, RWTH Aachen, 2005 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-98
  300. [6] Telle, R.; Salmang, H.; Scholze, H. (Hrsg.): Keramik. Heidelberg: Springer 2007 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-98
  301. [7] Frank, H.; Schulz, S.: Ermittlung von Kennwerten an keramisch- und kunstharzgebundenen Schleifkörpern. Sankt Augustin: Berufsgenossenschaftliches Institut für Arbeitssicherheit, FGS Forschungsbericht 1993 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-98
  302. [8] Ylipää, T.; Skoogh, A.; Bokrantz, J. et al.: Identification of maintenance improvement potential using OEE assessment. International Journal of Productivity and Performance Management 66 (2017) 1, pp. 126–143, https://doi.org/10.1108/IJPPM-01-2016-0028 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-98
  303. [9] Erhard, F.: Bedeutung von Scheibenhärte und Struktur beim Vollschnittschleichgangschleifen. Maschinenmarkt 83 (1977) 24, S. 408–420 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-98
  304. [10] Rammerstorfer, F.; Hastik, F.: Der dynamische E-Modul von Schleifkörpern. Werkstatt und Betrieb 107 (1974) 9, S. 527–533 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-98
  305. [11] Matsuno, Y.; Yamada, H.: Elastic Moduli of Grinding Wheel Based on a Simplified Model. Yogyo-Kyokai-Shi 90 (1982) 6, pp. 320–325 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-98
  306. [12] Haupt, D.; Möckel, R.: Bestimmung der Härte an Schleifkörpern unter Verwendung physikalisch-mechanischer Kenngrößen. Silikattechnik 35 (1984) 7, S. 195–198 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-98
  307. [13] Blankenburg, S.; Möckel, R.; Clausnitzer, M. et al.: Akustische Härteprüfung zur Schleifkörperauswahl. Werkstatt und Betrieb 118 (1985) 5, S. 267–270 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-98
  308. [14] König, W.; Föllinger, H.: Elasticity modulus of grinding wheels and its impact on their in-process behavior. cfi/Ber. DKG 64 (1987) Nr. 6/7, pp. 220–224 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-98
  309. [15] König, W.; Föllinger, H.: Elasticity modulus of grinding wheels and its impact on their in-process behavior. cfi/Ber. DKG 64 (1987) Nr. 8/9, pp. 296–300 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-98
  310. [16] Reuter, E.; Prinz, S.; Breuer, P. et al.: Werkzeugseitige Chargenschwankungen beim Schleifen. wt Werkstattstechnik online 114 (2024) 10, S. 665–672, https://doi.org/10.37544/1436-4980-2024-10-93 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-98
  311. [17] Barth, S.; Klocke, F.: Influence of the Grinding Wheel Topography on the Thermo-Mechanical Stress Collective in Grinding. Inventions 2 (2017) 4, pp. 34, https://doi.org/10.3390/inventions2040034 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-98
  312. [18] DIN EN ISO 25178–2: Geometrische Produktspezifikation (GPS) – Oberflächenbeschaffenheit: Flächenhaft – Teil 2: Begriffe und Kenngrößen für die Oberflächenbeschaffenheit (ISO 25178–2:2021); Deutsche Fassung. Ausgabe September 2023 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-98
  313. [19] Sawalem, M. M.; Blaow, M. M.: Evaluation of Residual Stresses in Grinding by Magnetic Barkhausen Noise. The International Journal of Engineering and Information Technology (IJEIT) 2 (2016) 2, pp. 68–72 Open Google Scholar doi.org/10.37544/1436-4980-2026-01-02-98

Citation

Download RIS Download BibTex

Downloads

Download chapter (PDF)

Notice

This work is protected by copyright and may only be used in accordance with the provisions of the Terms of Use and License Agreement. Any use of the work beyond this is expressly prohibited and will be prosecuted.

Share via email

Media