Effizientes Kalandrieren von Batterieelektroden/Efficient calendering of battery electrodes

Table of contents

Bibliographic information

Cover of Volume: wt Werkstattstechnik online Volume 115 (2025), Issue 05
Open Access Full access

wt Werkstattstechnik online

Volume 115 (2025), Issue 05

Authors:
Publisher
VDI fachmedien, Düsseldorf
Copyright Year
2025
ISSN-Online
1436-4980
ISSN-Print
1436-4980

Chapter information

Open Access Full access

Volume 115 (2025), Issue 05

Effizientes Kalandrieren von Batterieelektroden/Efficient calendering of battery electrodes

Authors:
ISSN-Print
1436-4980
ISSN-Online
1436-4980
Preview:

Currently, the production of lithium-ion battery cells is subject to high levels of scrap across almost the entire process chain. A reduction in production scrap reduces both the consumption of resources and costs, and increases the productivity of the entire production process. Using the calendering process as an example, the paper shows how DEM simulations and sensor integration can be used to defect and reduce detect patterns in brownfield and new plants.

Bibliography

  1. [1] Backhaus, R.: Zellentwicklungen für die Batterien künftiger Elektrofahrzeuge. ATZ - Automobiltechnische Zeitschrift 125 (2023) 11, S. 10–15 Open Google Scholar DOI: 10.37544/1436-4980-2025-05-16
  2. [2] Fraunhofer Research Institution for Battery Cell Production FFB: Mastering Ramp-up of Battery of Production Open Google Scholar DOI: 10.37544/1436-4980-2025-05-16
  3. [3] Beuse, T.; Fingerle, M.; Wagner, C. et al.: Comprehensive Insights into the Porosity of Lithium-Ion Battery Electrodes: A Comparative Study on Positive Electrodes Based on LiNi0.6Mn0.2Co0.2O2 (NMC622). Batteries 7 (2021) 4, S. 70 Open Google Scholar DOI: 10.37544/1436-4980-2025-05-16
  4. [4] Yourey, W.: Theoretical Impact of Manufacturing Tolerance on Lithium-Ion Electrode and Cell Physical Properties. Batteries 6 (2020) 2, S. 23 Open Google Scholar DOI: 10.37544/1436-4980-2025-05-16
  5. [5] Kößler, F.; Hertweck, R.; Fleischer, J.: Wechselwirkungserfassung zwischen Walzenrundlauf und Elektrodendicke/Sensor integration in a battery calender for interaction detection between roll concentricity and electrode thickness. wt Werkstattstechnik online 113 (2023) 11-12, S. 469–474 Open Google Scholar DOI: 10.37544/1436-4980-2025-05-16
  6. [6] Diener, A.; Ivanov, S.; Haselrieder, W. et al.: Evaluation of Deformation Behavior and Fast Elastic Recovery of Lithium‐Ion Battery Cathodes via Direct Roll‐Gap Detection During Calendering. Energy Technology 10 (2022) 4, S. 2101033 Open Google Scholar DOI: 10.37544/1436-4980-2025-05-16
  7. [7] Günther, T.; Schreiner, D.; Metkar, A. et al.: Classification of Calendering‐Induced Electrode Defects and Their Influence on Subsequent Processes of Lithium‐Ion Battery Production. Energy Technology 8 (2019) 2, S. 1900026 Open Google Scholar DOI: 10.37544/1436-4980-2025-05-16
  8. [8] Bold, B.; Fleischer, J.: Kalandrieren von Elektroden für Li-Ionen-Batterien. Wechselwirkung zwischen Anlagen- und Materialparameter. ZWF (2018) Open Google Scholar DOI: 10.37544/1436-4980-2025-05-16
  9. [9] Bold, B.: Kompensation der Wrinkle-Bildung beim Kalandrieren von Lithium-Ionen-Kathoden. Dissertation Open Google Scholar DOI: 10.37544/1436-4980-2025-05-16
  10. [10] Mayr, A.; Schreiner, D.; Stumper, B. et al.: In-line Sensor-based Process Control of the Calendering Process for Lithium-Ion Batteries. Procedia CIRP 107 (2022), S. 295–301 Open Google Scholar DOI: 10.37544/1436-4980-2025-05-16
  11. [11] Kößler, F.; Hertweck, R.; Fleischer, J.: Indentation tests on battery electrodes to estimate the target gap of battery calenders. 2024 1st International Conference on Production Technologies and Systems for E-Mobility (EPTS), Bamberg, Germany, 2024, pp. 1–6 Open Google Scholar DOI: 10.37544/1436-4980-2025-05-16
  12. [12] Wurba, A.-K.; Klemens, J.; Mayer, D. et al.: Methodology for the characterization and understanding of longitudinal wrinkling during calendering of lithium-ion and sodium-ion battery electrodes. Procedia CIRP 120 (2023), S. 314–319 Open Google Scholar DOI: 10.37544/1436-4980-2025-05-16
  13. [13] Anderlik, S.; Kößler, F.; Sawodny, J. et al.: Dashboards in der Batteriezellfertigung : Datenerfassung zur Bedienerunterstützung beim Kalandrieren von Batterieelektroden (2024) Open Google Scholar DOI: 10.37544/1436-4980-2025-05-16
  14. [14] Sangrós Giménez, C.; Finke, B.; Nowak, C. et al.: Structural and mechanical characterization of lithium-ion battery electrodes via DEM simulations. Advanced Powder Technology 29 (2018) 10, S. 2312–2321 Open Google Scholar DOI: 10.37544/1436-4980-2025-05-16
  15. [15] Thornton, C.; Ning, Z.: A theoretical model for the stick/bounce behaviour of adhesive, elastic-plastic spheres. Powder Technology 99 (1998) 2, S. 154–162 Open Google Scholar DOI: 10.37544/1436-4980-2025-05-16
  16. [16] Potyondy, D. O.; Cundall, P. A.: A bonded-particle model for rock. International Journal of Rock Mechanics and Mining Sciences 41 (2004) 8, S. 1329–1364 Open Google Scholar DOI: 10.37544/1436-4980-2025-05-16
  17. [17] Lippke, M.; Ohnimus, T.; Frankenberg, F. et al.: Drying and calendering of Lithium Ion battery electrodes: A combined simulation approach. Powder Technology 444 (2024), S. 119984 Open Google Scholar DOI: 10.37544/1436-4980-2025-05-16
  18. [18] Landesfeind, J.; Hattendorff, J.; Ehrl, A. et al.: Tortuosity Determination of Battery Electrodes and Separators by Impedance Spectroscopy. Journal of The Electrochemical Society 163 (2016) 7, A1373-A1387 Open Google Scholar DOI: 10.37544/1436-4980-2025-05-16

Citation

Download RIS Download BibTex

Downloads

Download chapter (PDF)

Notice

This work is protected by copyright and may only be used in accordance with the provisions of the Terms of Use and License Agreement. Any use of the work beyond this is expressly prohibited and will be prosecuted.

Share via email

Media