Strukturdynamisches Verhalten der Hauptspindel im Betrieb/Structural-dynamic behavior of the main spindle during machining – Determining the main spindle’s structural-dynamic properties based on operating conditions

Inhaltsverzeichnis

Bibliographische Infos

Cover der Ausgabe: wt Werkstattstechnik online Jahrgang 115 (2025), Heft 07-08
Open Access Vollzugriff

wt Werkstattstechnik online

Jahrgang 115 (2025), Heft 07-08

Autor:innen:
Verlag
VDI fachmedien, Düsseldorf
Copyrightjahr
2025
ISSN-Online
1436-4980
ISSN-Print
1436-4980

Kapitelinformationen

Open Access Vollzugriff

Jahrgang 115 (2025), Heft 07-08

Strukturdynamisches Verhalten der Hauptspindel im Betrieb/Structural-dynamic behavior of the main spindle during machining – Determining the main spindle’s structural-dynamic properties based on operating conditions

ISSN-Print
1436-4980
ISSN-Online
1436-4980
Kapitelvorschau:

Als zentrale Komponente einer Fräsmaschine bestimmt die Hauptspindel maßgeblich die Genauigkeit sowie die Leistungsgrenzen des Fräsprozesses. Während des Fräsens ist die Hauptspindel zugleich statischen und dynamischen Belastungen ausgesetzt. Variationen der Prozessparameter und Betriebszustände beeinflussen dabei die strukturdynamischen Eigenschaften – sowohl statisch als auch dynamisch. Durch eine kontinuierliche Überwachung dieser Eigenschaften lassen sich potenziell spindelschädliche Bearbeitungsoperationen frühzeitig erkennen und vermeiden.

Literaturverzeichnis

  1. [1] United Nations: Paris Agreement. 12.12.2015 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  2. [2] Bundesministerium für Wirtschaft und Klimaschutz: Klimaschutz in Zahlen. Aktuelle Emissionstrends und Klimaschutzmaßnahmen in Deutschland, Berlin, Heidelberg, 2022 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  3. [3] Umweltbundesamt: Finale Daten für 2023. Klimaschädliche Emissionen sanken um zehn Prozent. 15.01.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  4. [4] Heimes, H.; Kampker, A.; Kehrer, M. et al.: Strategien zur Erreichung der Emissionsziele im Nutzfahrzeugsektor, 2023 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  5. [5] O‘Hayre, R.; Cha, S.-W.; Colella, W. et al.: Fuel Cell Fundamentals. Wiley 2016 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  6. [6] El-Shafie, M.: Hydrogen production by water electrolysis technologies: A review. Results in Engineering 20 (2023), S. 101426 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  7. [7] Heimes, H. H.; Kampker, A.; Kehrer, M. et al.: Brennstoffzellensysteme. In: Kampker, A.; Heimes, H. H. (Hrsg.): Elektromobilität. Berlin, Heidelberg: Springer Berlin Heidelberg 2024, S. 153–164 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  8. [8] Verein Deutscher Ingenieure: Entwicklung technischer Produkte und Systeme. VDI 2221. November 2019 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  9. [9] Tjarks, G.: PEM-Elektrolyse-Systeme zur Anwendung in Power-to-Gas Anlagen. Dissertation, Forschungszentrum Jülich, 2017 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  10. [10] Zhang, J.; Zhang, H.; Wu, J. et al.: Techniques for PEM Fuel Cell Testing and Diagnosis. In: Pem Fuel Cell Testing and Diagnosis. Elsevier 2013, S. 81–119 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  11. [11] Wagner, N.: Einsatz der Impedanzspektroskopie in der Brennstoffzellenforschung. tm - Technisches Messen 78 (2011) 1, S. 30–35 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  12. [12] WU, J.; YUAN, X.; WANG, H. et al.: Diagnostic tools in PEM fuel cell research: Part I Electrochemical techniques. International Journal of Hydrogen Energy 33 (2008) 6, S. 1735–1746 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  13. [13] Kampker, A.; Heimes, H.; Kehrer, M. et al.: Produktion von Elektrolyseursystemen, Frankfurt am Main, 2023 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  14. [14] Oh, S.; Lim, D.; Han, Y. et al.: Development of Chemical and Mechanical Acceleration Stress Test Method for PEMFC Polymer Membranes. 2023 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  15. [15] Mohrdieck, C.; Venturi, M.; Breitrück, K.: Mobile Anwendungen. In: Töpler, J.; Lehmann, J. (Hrsg.): Wasserstoff und Brennstoffzelle. Berlin, Heidelberg: Springer Berlin Heidelberg 2017, S. 59–113 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  16. [16] Lu, G.; Yan, Q.; Li, S. et al.: Design and performance study of a kilowatt-class PEMFC stack with metal fiber felts as flow fields. International Journal of Electrochemical Science 19 (2024) 11, S. 100839 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  17. [17] Jaramillo Rodríguez, N. D.; Luxa, A.; Jürgensen, L.: Adaptation and Application of a Polarisation Curve Test Protocol for a Commercial Pem Electrolyser on Cell and Stack Level. Acta Mechanica et Automatica 17 (2023) 3, S. 395–404 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  18. [18] Gul, E.; Baldinelli, G.; Farooqui, A. et al.: AEM-electrolyzer based hydrogen integrated renewable energy system optimisation model for distributed communities. Energy Conversion and Management 285 (2023), S. 117025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  19. [19] Holst, M.; Aschbrenner, S.; Smolinka, T. et al.: Cost forecast for low temperature electrolysis. Technology driven bottom-up prognosis for PEM and alkaline water electrolysis systems. A cost analysis study on behalf of Clean Air Task Force, 2021 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  20. [20] Bernat, R.; Milewski, J.; Dybinski, O. et al.: Review of AEM Electrolysis Research from the Perspective of Developing a Reliable Model. Energies 17 (2024) 20, S. 5030 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  21. [21] Klell, M.; Eichlseder, H.; Trattner, A.: Erzeugung. In: Klell, M.; Eichlseder, H.; Trattner, A. (Hrsg.): Wasserstoff in der Fahrzeugtechnik. Wiesbaden: Springer Fachmedien Wiesbaden 2018, S. 71–108 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  22. [22] Bender, B.; Feldhusen, J.; Krause, D. et al.: Grundlagen technischer Systeme und des methodischen Vorgehens. In: Bender, B.; Göhlich, D. (Hrsg.): Dubbel Taschenbuch für den Maschinenbau 2: Anwendungen. Berlin, Heidelberg: Springer Berlin Heidelberg 2020, S. 3–63 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  23. [23] Gericke, K.; Bender, B.; Pahl, G. et al.: Der Produktentwicklungsprozess. In: Bender, B.; Gericke, K. (Hrsg.): Pahl/Beitz Konstruktionslehre. Berlin, Heidelberg: Springer Berlin Heidelberg 2021, S. 57–93 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  24. [24] Europäische Kommission: Richtlinie 2014/34/EU. Richtlinie 2014/34/EU. 29.3.2014 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  25. [25] Deutsches Institut für Normung: 22734. Wasserstofferzeuger auf Grundlage der Elektrolyse von Wasser. Oktober 2024 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  26. [26] Wartzack, S.: Auswahl- und Bewertungsmethoden. In: Bender, B.; Gericke, K. (Hrsg.): Pahl/Beitz Konstruktionslehre. Berlin, Heidelberg: Springer Berlin Heidelberg 2021, S. 307–334 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  27. [27] Verein Deutscher Ingenieure: VDI 2225. Konstruktionsmethodik. Beuth Verlag 1998 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-6
  28. [1] Statista: Preisentwicklung für Lithiumcarbonat in den Jahren 2012 bis 2024. Stand: 2025. Internet: de.statista.com/statistik/daten/studie/1323981/umfrage/preisentwicklung-fuer-lithiumcarbonat/. Zugriff am 24.07.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-19
  29. [2] Sawicki, M.; Shaw, L. L.: Advances and challenges of sodium ion batteries as post lithium ion batteries. RSC Advances 65 (2015) 5, pp. 53129–53154 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-19
  30. [3] Wang, Y.; Ou, R.; Yang, J. et al.: The safety aspect of sodium ion batteries for practical applications. Journal of Energy Chemistry 95 (2024), pp. 407–427 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-19
  31. [4] Feng, X.; Ouyang, M.; Liu, X. et al.: Thermal runaway mechanism of lithium ion battery for electric vehicles: A review. Energy Storage Materials 10 (2018), pp. 246–267 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-19
  32. [5] Hu, P.; Aifantis, K. E.: Sodium‐Ion Batteries. In: Kumar, R.; Aifantis, K.; Hu, P. (Hrsg.): Rechargeable Ion Batteries. Hoboken, New Jersey/ USA: Wiley 2023, pp. 269–298 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-19
  33. [6] Deb, D.; Sai Gautam, G.: Critical overview of polyanionic frameworks as positive electrodes for Na-ion batteries. Journal of Materials Research 37 (2022) 19, pp. 3169–3196 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-19
  34. [7] Yu, Y.: Sodium-ion batteries. Energy storage materials and technologies. Weinheim: Wiley-VCH 2022 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-19
  35. [8] Xie, M.; Wu, F.; Huang, Y.: Sodium-Ion Batteries. Berlin: De Gruyter 2022 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-19
  36. [9] Moon, H.; Innocenti, A.; Liu, H. et al.: Bio-Waste-Derived Hard Carbon Anodes Through a Sustainable and Cost-Effective Synthesis Process for Sodium-Ion Batteries. ChemSusChem 16 (2023) 1, e202201713 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-19
  37. [10] Velumani, D.; Bansal, A.: Thermal Behavior of Lithium- and Sodium-Ion Batteries: A Review on Heat Generation, Battery Degradation, Thermal Runway – Perspective and Future Directions. Energy & Fuels 36 (2022) 23, pp. 14000–14029 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-19
  38. [11] Liu, K.; Liu, Y.; Lin, D. et al.: Materials for lithium-ion battery safety. Science advances 4 (2018) 6, eaas9820 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-19
  39. [12] Yang, C.; Xin, S.; Mai, L. et al.: Materials Design for High‐Safety Sodium‐Ion Battery. Advanced Energy Materials 11 (2021) 2, doi.org/10.1002/aenm.202000974 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-19
  40. [13] Wang, Y.; Feng, X.; Huang, W. et al.: Challenges and Opportunities to Mitigate the Catastrophic Thermal Runaway of High‐Energy Batteries. Advanced Energy Materials 13 (2023) 15, doi.org/10.1002/aenm.202203841 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-19
  41. [14] Bates, A. M.; Preger, Y.; Torres-Castro, L. et al.: Are solid-state batteries safer than lithium-ion batteries? Joule 6 (2022) 4, pp. 742–755 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-19
  42. [15] Wu, X.; Song, K.; Zhang, X. et al.: Safety Issues in Lithium Ion Batteries: Materials and Cell Design. Frontiers in Energy Research 7 (2019), doi.org/10.3389/fenrg.2019.00065 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-19
  43. [16] Mei, W.; Cheng, Z.; Wang, L. et al.: Thermal hazard comparison and assessment of Li-ion battery and Na-ion battery. Journal of Energy Chemistry 102 (2025), pp. 18–26 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-19
  44. [17] Zakharchenko, T. K.; Nikiforov, D. I.; Serdyukov, G. D. et al.: Thermal Runaway of Na‐Ion Batteries with Na 3 V 2 O 2 (PO 4 ) 2 F Cathodes. Batteries & Supercaps 8 (2025) 2, doi.org/10.1002/batt.202400386 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-19
  45. [18] Yue, Y.; Jia, Z.; Li, Y. et al.: Thermal runaway hazards comparison between sodium-ion and lithium-ion batteries using accelerating rate calorimetry. Process Safety and Environmental Protection 189 (2024), pp. 61–70 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-19
  46. [19] Robinson, J. B.; Finegan, D. P.; Heenan, T. M. M. et al.: Microstructural Analysis of the Effects of Thermal Runaway on Li-Ion and Na-Ion Battery Electrodes. Journal of Electrochemical Energy Conversion and Storage 15 (2018) 1, doi.org/10.1115/1.4038518 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-19
  47. [20] Li, Z.; Cheng, Z.; Yu, Y. et al.: Thermal runaway comparison and assessment between sodium-ion and lithium-ion batteries. Process Safety and Environmental Protection 193 (2025), pp. 842–855 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-19
  48. [21] Abbott, K. C.; Buston, J. E.; Gill, J. et al.: Comprehensive gas analysis of a 21700 Li(Ni0.8Co0.1Mn0.1O2) cell using mass spectrometry. Journal of Power Sources 539 (2022), #231585 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-19
  49. [22] Schöberl, J.; Ank, M.; Schreiber, M. et al.: Thermal runaway propagation in automotive lithium-ion batteries with NMC-811 and LFP cathodes: Safety requirements and impact on system integration. eTransportation 19 (2024), # 100305, doi.org/10.1016/j.etran.2023.100305 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-19
  50. [23] Ohneseit, S.; Finster, P.; Floras, C. et al.: Thermal and Mechanical Safety Assessment of Type 21700 Lithium-Ion Batteries with NMC, NCA and LFP Cathodes–Investigation of Cell Abuse by Means of Accelerating Rate Calorimetry (ARC). Batteries 9 (2023) 5, #237 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-19
  51. [1] König, A.; Nicoletti, L.; Schröder, D. et al.: An Overview of Parameter and Cost for Battery Electric Vehicles. World Electric Vehicle Journal 12 (2021) 1, S. 21 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  52. [2] Suttakul, P.; Wongsapai, W.; Fongsamootr, T. et al.: Total cost of ownership of internal combustion engine and electric vehicles: A real-world comparison for the case of Thailand. Energy Reports 8 (2022), S. 545–553 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  53. [3] Paarmann, S.; Schreiber, M.; Chahbaz, A. et al.: Short‐Term Tests, Long‐Term Predictions – Accelerating Ageing Characterisation of Lithium‐Ion Batteries. Batteries & Supercaps 7 (2024) 11 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  54. [4] Menye, J. S.; Camara, M.-B.; Dakyo, B.: Lithium Battery Degradation and Failure Mechanisms: A State-of-the-Art Review. Energies 18 (2025) 2, S. 342 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  55. [5] Clerici, D.; Martelli, S.; Mocera, F. et al.: Mechanical characterization of lithium-ion batteries with different chemistries and formats. Journal of Energy Storage 84 (2024), S. 110899 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  56. [6] Popp, H.; Koller, M.; Jahn, M. et al.: Mechanical methods for state determination of Lithium-Ion secondary batteries: A review. Journal of Energy Storage 32 (2020), S. 101859 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  57. [7] Ponomareva, A.: Battery Management System (BMS): Effective Ways to Measure State-of-Charge and State-of-Health. Medium (2021) Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  58. [8] Hu, X.; Feng, F.; Liu, K. et al.: State estimation for advanced battery management: Key challenges and future trends. Renewable and Sustainable Energy Reviews 114 (2019), S. 109334 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  59. [9] S, V.; Che, H. S.; Selvaraj, J. et al.: State of Health (SoH) estimation methods for second life lithium-ion battery—Review and challenges. Applied Energy 369 (2024), S. 123542 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  60. [10] Han, X.; Lu, L.; Zheng, Y. et al.: A review on the key issues of the lithium ion battery degradation among the whole life cycle. eTransportation 1 (2019), S. 100005 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  61. [11] Zhuo, M.; Offer, G.; Marinescu, M.: Degradation model of high-nickel positive electrodes: Effects of loss of active material and cyclable lithium on capacity fade. Journal of Power Sources 556 (2023), S. 232461 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  62. [12] Birkl, C. R.; Roberts, M. R.; McTurk, E. et al.: Degradation diagnostics for lithium ion cells. Journal of Power Sources 341 (2017), S. 373–386 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  63. [13] Lin, X.; Khosravinia, K.; Hu, X. et al.: Lithium Plating Mechanism, Detection, and Mitigation in Lithium-Ion Batteries. Progress in Energy and Combustion Science 87 (2021), S. 100953 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  64. [14] Adenusi, H.; Chass, G. A.; Passerini, S. et al.: Lithium Batteries and the Solid Electrolyte Interphase (SEI)—Progress and Outlook. Advanced Energy Materials 13 (2023) 10 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  65. [15] Su, L.; Xu, Y.; Dong, Z.: State‐of‐health estimation of lithium‐ion batteries: A comprehensive literature review from cell to pack levels. Energy Conversion and Economics 5 (2024) 4, S. 224–242 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  66. [16] Gervillié-Mouravieff, C.; Bao, W.; Steingart, D. A. et al.: Non-destructive characterization techniques for battery performance and life-cycle assessment. Nature Reviews Electrical Engineering 1 (2024) 8, S. 547–558 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  67. [17] Orcioni, S.; Buccolini, L.; Ricci, A. et al.: Lithium-ion Battery Electrothermal Model, Parameter Estimation, and Simulation Environment. Energies 10 (2017) 3, S. 375 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  68. [18] Pozzato, G.; Allam, A.; Pulvirenti, L. et al.: Analysis and key findings from real-world electric vehicle field data. Joule 7 (2023) 9, S. 2035–2053 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  69. [19] Yuan, Q.; Hao, W.; Su, H. et al.: Investigation on Range Anxiety and Safety Buffer of Battery Electric Vehicle Drivers. Journal of Advanced Transportation 2018 (2018), S. 1–11 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  70. [20] Zhao, J.; Feng, X.; Tran, M.-K. et al.: Battery safety: Fault diagnosis from laboratory to real world. Journal of Power Sources 598 (2024), S. 234111 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  71. [21] Wang, S.; Ren, D.; Xu, C. et al.: Lithium plating induced volume expansion overshoot of lithium-ion batteries: Experimental analysis and modeling. Journal of Power Sources 593 (2024), S. 233946 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  72. [22] Louli, A. J.; Ellis, L. D.; Dahn, J. R.: Operando Pressure Measurements Reveal Solid Electrolyte Interphase Growth to Rank Li-Ion Cell Performance. Joule 3 (2019) 3, S. 745–761 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  73. [23] Proff, H.; Bowman, K.; Robinson, R. et al.: 2024 Global Automotive Consumer Study. Key Findings: Global Focus Countries (2024), S. 1–26 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  74. [24] Deutsche Automobil Treuhand GmbH: DAT Report 025 | Kurzbericht. 2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  75. [25] Sieg, J.; Schmid, A. U.; Rau, L. et al.: Fast-charging capability of lithium-ion cells: Influence of electrode aging and electrolyte consumption. Applied Energy 305 (2022), S. 117747 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  76. [26] Aviloo GmbH: Erstmalige Messung der Batteriedegradation in Abhängigkeit zum Schnellladeanteil. 29.03.2023 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  77. [27] Hackmann, M.; Knörzer, H.; Peuffer, J. et al.: Battery aging in practice: Analysis of over 7,000 vehicles provide deep insights into battery life and vehicle residual value (2024) Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-26
  78. [1] IEEE Transportation Electrification Conference and Expo (ITEC). 2012 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-34
  79. [2] Roca-Puigròs, M.; Marmy, C.; Wäger, P. et al.: Modeling the transition toward a zero emission car fleet: Integrating electrification, shared mobility, and automation. Transportation Research Part D: Transport and Environment 115 (2023), S. 103576 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-34
  80. [3] Tober, W.: Praxisbericht Elektromobilität und Verbrennungsmotor. Analyse elektrifizierter Pkw-Antriebskonzepte. Wiesbaden: Springer 2016 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-34
  81. [4] Philipp Keller; Tim Wicke: Verkaufszahlen von Elektroautos: Vorübergehende Flaute oder anhaltende Trendumkehr? Stand: 24.10.2024. Internet: https://www.isi.fraunhofer.de/de/blog/themen/batterie-update/elektroautos-verkaufszahlen-hybrid-flaute-deutschland-europa.html. Zugriff am 29.03.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-34
  82. [5] Palmer, C.: The Drive for Electric Motor Innovation. Engineering 8 (2022), S. 9–11 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-34
  83. [6] Haas, A.; Hackmann, W.: Process for Manufacturing Stator Wave Windings for Electric Traction Motors. MTZ worldwide 83 (2022) 5, S. 62–65 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-34
  84. [7] o.V.: New Energy Vehicle Hairpin Motor With Huge Market Growth Space and Policy Advantages. Stand: 09.12.2022. Internet: https://en.cnhonest.com/news/234.html. Zugriff am 09.12.2022 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-34
  85. [8] Global Hairpin Stator Market Growth 2022-2028, Intelligence Market Report, London, UK, 2022 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-34
  86. [9] Hans-Martin Fischer: Spannungsklassen in der Elektromobilität. Frankfurt am Main: ZVEI 2013 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-34
  87. [10] El Hadraoui, H.; Zegrari, M.; Chebak, A. et al.: A Multi-Criteria Analysis and Trends of Electric Motors for Electric Vehicles. World Electric Vehicle Journal 13 (2022) 4, S. 65 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-34
  88. [11] Binder, A.: Elektrische Maschinen und Antriebe. Grundlagen, Betriebsverhalten. Berlin, Heidelberg: Springer 2017 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-34
  89. [12] Gundabattini, E.; Kuppan, R.; Solomon, D. G. et al.: A review on methods of finding losses and cooling methods to increase efficiency of electric machines. Ain Shams Engineering Journal 12 (2021) 1, S. 497–505 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-34
  90. [13] Bailoni, M.; Nategh, S.; Gaussens, B. et al.: A Study on Insulation Components of High Voltage Electrical Machines Used in Electric Vehicles. IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society, Brussels, Belgium, 2022, S. 1–6 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-34
  91. [14] Sihvo, V.; Nerg, J.; Pyrhonen, J.: Insulation System and Thermal Design of a Hermetically Sealed Turbo-Generator Operating in a Small-Power CHP Plant. 2007 International Conference on Clean Electrical Power, Capri, Italy, 2007, S. 45–50 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-34
  92. [15] Mancinelli, P.; Stagnitta, S.; Cavallini, A.: Qualification of Hairpin Motors Insulation for Automotive Applications. IEEE Transactions on Industry Applications 53 (2017) 3, S. 3110–3118 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-34
  93. [16] Kampker, I. A.; Dorn, B.; Brans, F. et al.: Stator design for flexible manufacturing in hairpin technology, Newcastle, UK, 2022, pp. 6–11 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-34
  94. [17] Fleischer, J.; Hausmann, L.; Wirth, F.: Production-oriented design of electric traction drives with hairpin winding, Enschede, Niederlande, 2021, pp. 169–174 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-34
  95. [18] Born, H. C.; Schaffrath, M.; Tege, D. et al.: Analysis of the Influence of Various Bending Parameters on the Resulting Electrical Properties of Bent Hairpins. 2023 13th International Electric Drives Production Conference (EDPC), Regensburg, Germany, 2023, S. 1–8 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-34
  96. [19] Hanisch, L. V.; Dietrich, T.-H.; Henke, M.: Analysis of Partial Discharges and Failure Mechanism in Electrical Machines with Hairpin Winding. 2021 IEEE 13th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED), Dallas, TX, USA, 2021, S. 1–7 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-34
  97. [20] Madonna, V.; Giangrande, P.; Zhao, W. et al.: Insulation Capacitance as Diagnostic Marker for Thermally Aged, Low Voltage Electrical Machines. 2019 22nd International Conference on Electrical Machines and Systems (ICEMS), Harbin, China, 2019, S. 1–5 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-34
  98. [21] Mancinelli, P.; Stagnitta, S.; Cavallini, A.: Lifetime analysis of an automotive electrical motor with hairpin wound stator. 2016 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), Toronto, ON, Canada, 2016, S. 877–880 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-34
  99. [22] He, C.; Tenbohlen, S.; Beltle, M.: Ageing Analysis of Hairpin Windings in Inverter-Fed Motor Under PWM Voltage. Energies 18 (2025) 6, S. 1376 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-34
  100. [1] Brecher, C.; Weck, M.: Werkzeugmaschinen, Fertigungssysteme. Berlin: Springer Vieweg 2017 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-45
  101. [2] Ersoy, M.; Gies, S.: Fahrwerkhandbuch. Wiesbaden: Springer Fachmedien 2017 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-45
  102. [3] Runge, W.; Gaedke, A.; Heger, M. et al.: Elektrisch lenken. ATZextra 15 (2010) 2, S. 68–75 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-45
  103. [4] Robert Bosch GmbH: Elektrolenkung mit achsparalleler Servoeinheit. Internet: https://www.bosch-mobility.com/de/loesungen/lenkung/elektrolenkung-mit-achsparalleler-servoeinheit/. Zugriff am 17.05.2023 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-45
  104. [5] DMGMori: DMX 60 U. Hochleistungs- und präzises Universal-Fräszentrum für Werkstücke bis zu D630 x 450 mm und 300 kg. Internet: https://de.dmgmori.com/produkte/maschinen/fraesen/5-achs-fraesen/dmx-u/dmx-60-u. Zugriff am 08.05.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-45
  105. [6] August Steinmeyer GmbH & Co.KG: Schmierung von KGT. Stand: 10.04.2025. Internet: https://www.steinmeyer.com/de/technik/schmierung-und-abstreifer/. Zugriff am 10.04.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-45
  106. [7] Fleischer, J.; Schopp, M.; Broos, A. et al.: Datenbasis für lastabhängige Prozesseingriffe*. wt Werkstattstechnik online 97 (2007) 7-8, S. 491–497 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-45
  107. [8] Forstmann, J.: Kugelgewindetriebe im Einsatz an Kunststoffspritzgießmaschinen. , Disseration Universität Duisburg, Essen, 2010 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-45
  108. [9] Spohrer, A.: Steigerung der Ressourceneffizienz und Verfügbarkeit von Kugelgewindetrieben durch adaptive Schmierung. Dissertation Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-45
  109. [10] Klein, W. H.: Zustandsüberwachung von Rollen-Profilschienenführungen und Kugelgewindetrieben. Aachen: Apprimus-Verl. 2011 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-45
  110. [11] Münzing, T.: Auslegung von Kugelgewindetrieben bei oszillierenden Bewegungen und dynamischer Belastung. Dissertation, Universität Stuttgart Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-45
  111. [12] Shannon, C. E.: Communication in the Presence of Noise. Proceedings of the IRE 37 (1949) 1, S. 10–21 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-45
  112. [13] VDI: Richtlinie VDI 3832. Körperschallmessungen zur Zustandsbeurteilung von Wälzlagern in Maschinen und Anlagen (2013) Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-45
  113. [14] Helwig, N. J.: Zustandsbewertung industrieller Prozesse mittels multivariater Sensordatenanalyse am Beispiel hydraulischer und elektromechanischer Antriebssysteme, 2018 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-45
  114. [1] Altintas, Y.; Brecher, C.; Weck, M. et al.: Virtual Machine Tool. CIRP Annals 54 (2005) 2, S. 115–138 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  115. [2] Quintana, G.; Ciurana, J.: Chatter in machining processes: A review. International Journal of Machine Tools and Manufacture 51 (2011) 5, S. 363–376 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  116. [3] Navarro-Devia, J.; Chen, Y.; Dao, D. et al.: Chatter detection in milling processes—a review on signal processing and condition classification. The International Journal of Advanced Manufacturing Technology 125 (2023) 9-10, S. 3943–3980 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  117. [4] Brecher, C.; Chavan, P.; Epple, A.: Investigations on the limitations of rapid experimental determination of stability boundaries during milling. Mechanics & Industry 18 (2017) 6, S. 608 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  118. [5] Ji, Y.; Wang, X.; Liu, Z. et al.: Early milling chatter identification by improved empirical mode decomposition and multi-indicator synthetic evaluation. Journal of Sound and Vibration 433 (2018), S. 138–159 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  119. [6] Chen, Y.; Li, H.; Hou, L. et al.: Feature extraction using dominant frequency bands and time-frequency image analysis for chatter detection in milling. Precision Engineering 56 (2019), S. 235–245 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  120. [7] Tran, M. Q.; Liu, M. K.: Chatter Identification in End Milling Process Based on Cutting Force Signal Processing. IOP Conference Series: Materials Science and Engineering 654 (2019) 1, S. 12001 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  121. [8] Schmitz, T.; Smith, S.: Machining Dynamics. Cham: Springer International Publishing 2019 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  122. [9] Liu, X.; Wang, Z.; Li, M. et al.: Feature extraction of milling chatter based on optimized variational mode decomposition and multi-scale permutation entropy. The International Journal of Advanced Manufacturing Technology 114 (2021) 9-10, S. 2849–2862 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  123. [10] Tran, M.; Liu, M.; Tran, Q.: Analysis of Milling Chatter Vibration Based on Force Signal in Time Domain. In: Sattler, K.-U.; Nguyen, D. C.; Vu, N. P. et al. (Hrsg.): Advances in Engineering Research and Application. Cham: Springer International Publishing 2021, S. 192–199 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  124. [11] Zhao, Y.; Adjallah, K.; Sava, A. et al.: MaxEnt feature-based reliability model method for real-time detection of early chatter in high-speed milling. ISA transactions 113 (2021), pp. 39–51 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  125. [12] Chen, Y.; Li, H.; Hou, L. et al.: Chatter detection for milling using novel p-leader multifractal features. Journal of Intelligent Manufacturing 33 (2022) 1, S. 121–135 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  126. [13] Hauptfleischová, B.; Novotný, L.; Falta, J. et al.: In-Process Chatter Detection in Milling: Comparison of the Robustness of Selected Entropy Methods. Journal of Manufacturing and Materials Processing 6 (2022) 5, S. 125 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  127. [14] Perrelli, M.; Cosco, F.; Gagliardi, F. et al.: In-Process Chatter Detection Using Signal Analysis in Frequency and Time-Frequency Domain. Machines 10 (2022) 1, S. 24 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  128. [15] Wang, Y.; Zhang, M.; Tang, X. et al.: A kMap optimized VMD-SVM model for milling chatter detection with an industrial robot. Journal of Intelligent Manufacturing 33 (2022) 5, S. 1483–1502 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  129. [16] Xu, X.; Zhou, T.; Wan, L. et al.: Detection of modulated chatter using moving average difference spectrum analysis. Journal of Sound and Vibration 517 (2022), S. 116568 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  130. [17] Zheng, Q.; Chen, G.; Jiao, A.: Chatter detection in milling process based on the combination of wavelet packet transform and PSO-SVM. The International Journal of Advanced Manufacturing Technology 120 (2022) 1-2, S. 1237–1251 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  131. [18] Unver, H.; Sener, B.: A novel transfer learning framework for chatter detection using convolutional neural networks. Journal of Intelligent Manufacturing 34 (2023) 3, S. 1105–1124 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  132. [19] Zhang, P.; Gao, D.; Hong, D. et al.: Improving generalisation and accuracy of on-line milling chatter detection via a novel hybrid deep convolutional neural network. Mechanical Systems and Signal Processing 193 (2023), S. 110241 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  133. [20] Brecher, C.; Chavan, P.; Epple, A.: Efficient determination of stability lobe diagrams by in-process varying of spindle speed and cutting depth. Advances in Manufacturing 6 (2018) 3, S. 272–279 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  134. [21] Garrett, S. L.: The Simple Harmonic Oscillator. In: Garrett, S. L. (Hrsg.): Understanding Acoustics. Cham: Springer International Publishing 2020, S. 59–131 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  135. [22] Brecher, C.; Chavan, P.; Epple, A.: Investigations on the limitations of rapid experimental determination of stability boundaries during milling. Mechanics & Industry 18 (2017) 6, S. 608 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  136. [23] Brecher, C.; Klimaschka, R.; Neus, S.: Effiziente Ermittlung dynamischer Prozessgrenzen/Efficient determination of dynamic process limits. wt Werkstattstechnik online 114 (2024) 05, S. 220–229 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  137. [24] Reinhart, G.; Milberg, J.; Trucks, V.: Rechnergestützte Beurteilung von Getriebestrukturen in Werkzeugmaschinen. Berlin, Heidelberg: Springer Berlin Heidelberg 1996 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  138. [25] Simonyan, K.; Zisserman, A.: Very Deep Convolutional Networks for Large-Scale Image Recognition, 2014 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  139. [26] Brecher, C.; Weck, M.: Werkzeugmaschinen, Fertigungssysteme. Berlin, Heidelberg: Springer Vieweg 2017 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  140. [27] Bosetti, P.; Leonesio, M.; Parenti, P.: On Development of an Optimal Control System for Real-time Process Optimization on Milling Machine Tools. Procedia CIRP 12 (2013), S. 31–36 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-53
  141. [1] Abele, E.; Altintas, Y.; Brecher, C.: Machine tool spindle units. CIRP Annals 59 (2010) 2, pp. 781–802 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-63
  142. [2] Eckel, H.-M.: Kinematische Analyse von Spindellagern unter statischen und dynamischen Kräften. Aachen: Apprimus Verlag 2019 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-63
  143. [3] Möhring, H.-C.; Wiederkehr, P.; Erkorkmaz, K. et al.: Self-optimizing machining systems. CIRP Annals 69 (2020) 2, pp. 740–763 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-63
  144. [4] Brecher, C.; Eckel, H.-M.; Motschke, T. et al.: Estimation of the virtual workpiece quality by the use of a spindle-integrated process force measurement. CIRP Annals 68 (2019) 1, pp. 381–384 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-63
  145. [5] Brecher, C.; Eckel, H.-M.; Fey, M. et al.: Verfahren zur Erfassung einer axialen Verlängerung einer rotierenden Welle relativ zu einem Gehäuse. Patent. Internet: depatisnet.dpma.de/DepatisNet/depatisnet?action=bibdat&docid=WO002021098978A1. Zugriff am 28.07.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-63
  146. [6] Chavan, P. S.: Substructuring methods for efficient prediction of spindle-holder-tool assembly dynamics. Dissertation, RWTH Aachen University, 2023 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-63
  147. [7] Brecher, C.; Weck, M.: Werkzeugmaschinen Fertigungssysteme 2. Heidelberg: Springer-Verlag 2017 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-63
  148. [8] Schmitz, T.; Betters, E.; Budak, E. et al.: Review and status of tool tip frequency response function prediction using receptance coupling. Precision Engineering 79 (2023), pp. 60–77 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-63
  149. [9] Falker, J.: Analyse des Betriebsverhaltens von Hochgeschwindigkeits-Wälzlagern unter radialen Lasten. Dissertation, RWTH Aachen University, 2019 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-63
  150. [10] Cao, Y.; Altintas, Y.: A General Method for the Modeling of Spindle-Bearing Systems. Journal of Mechanical Design 126 (2004) 6, pp. 1089–1104 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-63
  151. [11] Mesys AG: MESYS Shaft Calculation. User Manual. Internet: www.mesys.ch/manual/mesys_shaft_calculation.html. Zugriff am 28.07.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-63
  152. [12] Lunze, J.: Regelungstechnik 2. Mehrgrößensysteme, Digitale Regelung. Berlin, Heidelberg: Springer-Verlag 2016 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-63
  153. [13] Polóni, T.; Kolmanovsky, I.; Rohaľ-Ilkiv, B.: Simple Input Disturbance Observer-Based Control: Case Studies. Journal of Dynamic Systems, Measurement, and Control 140 (2018) 1, doi.org/10.1115/1.4037298 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-63
  154. [1] Schuh, G.; Zeller, V.; Stich, V.: Digitalisierungs- und Informationsmanagement. Berlin: Springer 2022 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-70
  155. [2] Brüggemann, H.; Bremer, P.: Grundlagen Qualitätsmanagement. Von den Werkzeugen über Methoden zum TQM. Wiesbaden: Springer Vieweg 2020 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-70
  156. [3] Verein Deutscher Ingenieure e.V.: VDI/VDE 2206 - Entwicklung mechatronischer und cyber-physischer Systeme. Berlin: Beuth Verlag GmbH 2021 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-70
  157. [4] Mayer-Bachmann, R.: Integratives Anforderungsmanagement. Konzept und Anforderungsmodell am Beispiel der Fahrzeugentwicklung. Universitätsverlag Karlsruhe 2007 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-70
  158. [5] Bender, B.; Gericke, K.: Pahl/Beitz Konstruktionslehre. Berlin: Springer 2021 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-70
  159. [6] Mistler, M.: Entwicklung eines Vorgehenskonzeptes zum modellbasierten agilen Anforderungsmanagement (Requirements Engineering und Requirements Management) für Organisationen – REMOt, 2021 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-70
  160. [7] Schäuffele, J.; Zurawka, T.: Automotive Software Engineering. Wiesbaden: Springer Fachmedien 2016 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-70
  161. [8] Ackermann, M.: Mobility-as-a-Service. The Convergence of Automotive and Mobility Industries. Cham: Springer International Publishing; Imprint Springer 2021 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-70
  162. [9] Eigner, M.: System Lifecycle Management. Berlin: Springer 2021 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-70
  163. [10] Pischinger, S.; Seiffert, U.: Vieweg Handbuch Kraftfahrzeugtechnik. Wiesbaden: Springer Fachmedien 2021 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-70
  164. [11] Schlüter, N.: Generic Systems Engineering. Ein methodischer Ansatz zur Komplexitätsbewältigung. Berlin: Springer Vieweg 2023 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-70
  165. [12] Löckel, K.: Systems Engineering - Ganzheitlicher Ansatz mit großem Potenzial. In: ATZproduktion 2018, S. 18–23 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-70
  166. [13] Haberfellner, R.; Weck, O. L. de; Fricke, E. et al.: Systems Engineering. Fundamentals and Applications. Cham: Birkhäuser 2019 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-70
  167. [14] Hellenbrand, D.: Transdisziplinäre Planung und Synchronisation mechatronischer Produktentwicklungsprozesse. München: Dr. Hut 2013 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-70
  168. [15] Cadet, M.; Schulte, T.; Dickopf, T. et al.: Modellbasierte Entwicklung cybertronischer Systeme in der frühen Phase des Entwicklungsprozesses – Ein Vergleich mit der klassischen Produktentwicklung. In: Stuttgarter Symposium für Produktentwicklung 2017, S. 1–10 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-70
  169. [16] Gerhardt, F.: Framework zur Einführung des Systems Engineering auf Basis von PLM/ALM Lösungen in Enterprise Architekturen. In: ProduktDaten Journal 2016, S. 48–52 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-70
  170. [17] Deuter, A.; Otte, A.; Ebert, M. et al.: Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. In: 4th International Conference on System-Integrated Intelligence 2018, S. 107–113 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-70
  171. [1] Tschirner, C.: Rahmenwerk zur Integration des modellbasierten Systems Engineering in die Produktentstehung mechatronischer Systeme. Dissertation, Universität Paderborn, 2016 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  172. [2] Fresemann, C.; Stark, R.; Sauer, C. et al.: Lücken und Herausforderungen bei der praktischen Umsetzung des Model-Based Systems Engineering. Konstruktion (2019) 06, S. 81–83, doi. org/10.37544/0720-5953-2019-06-81 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  173. [3] Thommes, K.; Iseke, A.; Schneider, M.: Digitales und prädiktives Kompetenzmanagement. Heidelberg: Springer Vieweg 2024 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  174. [4] Incose: Incose Systems Engineering Handbook. Hoboken, New Jersey/ USA: Wiley 2023 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  175. [5] Verein Deutscher Ingenieure (VDI): VDI/VDE 2206 Entwicklung mechatronischer und cyber-physischer Systeme. Düsseldorf: VDI-Verlag 2021 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  176. [6] Schlüter, N.: Generic Systems Engineering. Heidelberg: Springer Vieweg 2023 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  177. [7] Albers, A.; Dumitrescu, R.; Gausemeier, J. et al. (Hrsg.): Strategie Advanced Systems Engineering – Leitinitiative zur Zukunft des Engineering und Innovationsstandorts Deutschland. Stand: 2022. Internet: www.advanced-systems-engineering.de/wp-content/uploads/ASE_Strategie.pdf. Zugriff am 08.07.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  178. [8] Rusch, F. R.; Willems, W.; Demke, N. et al.: Linking product development’s and society’s view on sustainability to enhance the contextual derivation and validation of requirements. IFAC-PapersOnLine 58 (2024) 19, pp. 1198–1203 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  179. [9] Schneider, B.; Schüle, S.; Kürümlüoglu, M. et al..: Advanced Systems Engineering unternehmensindividuell konfigurieren und einführen – Advanced Systems Engineering Assessment. WT Werkstattstechnik 114 (2024) 6, S. 259–267. Internet: www.werkstattstechnik.de. Düsseldorf: VDI Fachmedien Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  180. [10] Douglass, B. P.: Agile Systems Engineering. Amsterdam: Elsevier Inc. 2016 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  181. [11] Rusch, F. R.; Demke, N.; Willems, W. et al.: Context-based Derivation of Holistic Sustainability Requirements in the Early Phase of Product Development. Procedia CIRP 122 (2024), pp. 306–311 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  182. [12] Baughey, K.: Functional and Logical Structures: A Systems Engineering Approach. SAE Technical Paper (2011) 2011–01–0517, doi.org/10.4271/2011–01–0517 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  183. [13] Hoffmann, H.-P.: Systems Engineering Best Practices with the Rational Solution for Systems and Software Engineering. Somers NY: Deskbook Release 4.1 2013 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  184. [14] Péraire, C.; Edwards, M.; Fernandes, A. et al.: The IBM Rational Unified Process for System z. Stand: 2007. Internet: www.redbooks.ibm.com/redbooks/pdfs/sg247362.pdf. Zugriff am 08.07.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  185. [15] Voirin, J.-L.: Model-based System and Architecture Engineering with the Arcadia Method. London: ISTE Press – Elsevier 2017 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  186. [16] Salehi, V.; Florian, G.; Taha, J.: Implementation of Systems Modeling Language (SysML) in Consideration of the CONSENS Approach. DS 92: Proceedings of the DESIGN 2018 15th International Design Conference, 2018, pp. 2987–2998 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  187. [17] Pearce, P.; Hause, M.: ISO-15288: OOSEM and Model-Based Submarine Design. Stand: 2012. Internet: www.omg.org/sysml/Pearce_Hause_ISO-15288_OOSEM_and_Model-Based_Submarine_Design_SETE_APCOSE_20121.pdf. Zugriff am 08.07.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  188. [18] London, B.: A Model-Based Systems Engineering Framework for Concept Development. Cambridge, MA: Massachusetts Institute of Technology 2012 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  189. [19] Robinson, K.; Tramoundans, D.; Harvey, D. et al.: Demonstrating Model-Based Systems Engineering. Systems Engineering / Test & Evaluation Conference, Adelaide, 2010. Internet: www.shoalgroup.com/wp-content/uploads/2017/06/Robinson-et-al-2010-Demonstrating-Model-Based-Systems-Engineering-for-Specifying-Complex-Capability-SETE-2010.pdf. Zugriff am 08.07.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  190. [20] Estefan, J.: Survey of Model-Based Systems Engineering (MBSE) Methodologies. Incose MBSE Initiative, Pasadena, CA, 2008. Internet: https://www.omg.org/sysml/MBSE_Methodology_Survey_RevB.pdf. Zugriff am 08.07.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  191. [21] Incose: Incose Systems Engineering Competency Framework. Incose Technical Product Reference: Incose-TP-2018–002–01.0. Stand: 2018. Internet: www.incose.org/docs/default-source/professional-development-portal/isecf.pdf?sfvrsn=dad06bc7_4.Zugriff am 08.07.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  192. [22] Presland, I.; Whitcomb, C.; Zipes, L. (eds).: ECF Annex D: Incose Systems Engineering Competency Framework. Systems Engineering Competency Assessment Guide. Hoboken, New Jersey/ USA: John Wiley & Sons Inc. 2023 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  193. [23] Sheard, S.: Twelve Systems Engineering Roles. Systems Engineering Practices & Tools 6 (1996) 1, pp. 478–485 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  194. [24] Sheard, S.: The Value of Twelve Systems Engineering Roles. Systems Engineering Practices & Tools 6 (1996) 1, pp. 894–902 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  195. [25] Gräßler, I.; Oleff, C.; Hentze, J.: Role Model for Systems Engineering Application. Proceedings of the Design Society: International Conference on Engineering Design, 2019, pp. 1265–1274, doi.org/10.1017/dsi.2019.132 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  196. [26] Gräßler, I.; Thiele, H.; Grewe, B. et al.: Responsibility Assignment in Systems Engineering. Proceedings of the Design Society 2 (2022) 1, pp. 1875–1884, doi.org/10.1017/pds.2022.190 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  197. [27] Hage, H.: Rahmenwerk zur automatisierten Verifikation eines systemorientierten Produktentstehungsprozesses in der Automobilentwicklung. Dissertation, Helmut-Schmidt-Universität Hamburg, 2024 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-77
  198. [1] Königs, M.; Brecher, C.: Process-parallel virtual quality evaluation for metal cutting in series production. Procedia Manufacturing (2018) 26:1087–1093. doi:10.1016/j.promfg.2018.07.145 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-88
  199. [2] Fertig, A.; Weigold, M.; Chen, Y.: Machine Learning based quality prediction for milling processes using internal machine tool data. Advances in Industrial and Manufacturing Engineering 4:100074. (2022) doi:10.1016/j.aime.2022.100074 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-88
  200. [3] Wellmann, F.: Datengetriebene, kontextadaptive Produktivitätssteigerung von NC-Zerspanprozessen, 1. Aufl. Apprimus Wissenschaftsverlag, Aachen (2019) Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-88
  201. [4] Bilgili, D.; Kecibas, G.; Besirova, C.; Chehrehzad, M.R.; Burun, G.; Pehlivan, T.; Uresin, U.; Emekli, E.; Lazoglu, I.: Tool flank wear prediction using high-frequency machine data from industrial edge device. Procedia CIRP 118:483–488. (2023) doi:10.1016/j.procir.2023.06.083 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-88
  202. [5] Butler, Q.; Ziada, Y.; Stephenson, D.; Andrew Gadsden, S.: Condition Monitoring of Machine Tool Feed Drives: A Review. J. Manuf. Sci. Eng 144 (10) (2022). doi:10.1115/1.4054516 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-88
  203. [6] Yamada Y, Kakinuma Y (2016) Sensorless cutting force estimation for full-closed controlled ball-screw-driven stage. Int J Adv Manuf Technol 87(9-12):3337–3348. doi:10.1007/s00170-016-8710-5 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-88
  204. [7] Aslan, D.; Altintas, Y.: Prediction of Cutting Forces in Five-Axis Milling Using Feed Drive Current Measurements. IEEE/ASME Trans. Mechatron. 23 (2018) 2, S. 833–844. doi:10.1109/TMECH.2018.2804859 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-88
  205. [8] Saraie, H.; Sakahira, M.; Ibaraki, S.; Matsubara, A.; Kakino, Y.; Fujishima, M.: 326 Monitoring and Adaptive Control of Cutting Forces Based on Spindle Motor and Servo Motor Currents in Machining Centers. LEM21 2003 (0) S. 555–560. doi:10.1299/jsmelem.2003.555 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-88
  206. [9] Mostaghimi, H.; Park, CI.; Kang, G.; Park, S.S.; Lee, D. Y.: Reconstruction of cutting forces through fusion of accelerometer and spindle current signals. Journal of Manufacturing Processes 68:990–1003, (2021) doi:10.1016/j.jmapro.2021.06.007 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-88
  207. [10] Fey, M.; Epple, A.; Kehne, S.; Brecher, C.: Verfahren zur Bestimmung der Achslast auf Linear- und Rundachsen G01L 1/04, (2016) Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-88
  208. [11] Hochreiter S, Schmidhuber J (1997) Long short-term memory. Neural Computation 9(8):1735–1780. doi:10.1162/neco.1997.9.8.1735 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-88
  209. [12] Pankaj Malhotra, Lovekesh Vig, Gautam Shroff, Puneet Agarwal: Long short term memory networks for anomaly detection in time series. Proceedings 2015 (89), S. 89–94 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-88
  210. [13] Denkena, B.; Bergmann, B.; Stoppel, D.: (Hrsg) Reconstruction of Process Forces in a Five-Axis Milling Center with a LSTM Neural Network in Comparison to a Model-Based Approach. Springer, Cham, 2023 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-88
  211. [14] Li, B.; Liu, T.; Liao, J.; Feng, C.; Yao, L.; Zhang, J.: Non-invasive milling force monitoring through spindle vibration with LSTM and DNN in CNC machine tools. Measurement 210:112554. doi:10.1016/j.measurement.2023.112554, 2023) Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-88
  212. [15] Aswani, A.; Noam, S.; Parmar, N.; Uszkoreit, J.; Jones, L.; Aidan, N.; Kaiser, G. L.; Polosukhin, I.: Attention is all you need. Advances in neural information processing systems, 2017 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-88
  213. [16] Li, Shiyang, Xiaoyong Jin, Yao Xuan, Xiyou Zhou, Wenhu Chen, Yu-Xiang Wang, and Xifeng Yan: Enhancing the locality and breaking the memory bottleneck of transformer on time series forecasting. Advances in neural information processing systems 32:1–11 (2019) Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-88
  214. [17] Zerveas, G.; Jayaraman, S.; Patel, D.; Bhamidipaty, A.; Eickhoff, C.: A Transformer-based Framework for Multivariate Time Series Representation Learning (2020) Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-88
  215. [18] Li, Z.; Rao, Z.; Pan, L.; Wang, P.; Xu, Z.: Ti-MAE: Self-Supervised Masked Time Series Autoencoders (2023) Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-88
  216. [19] Cheng, M.; Liu, Q.; Liu, Z.; Zhang, H.; Zhang, R.; Chen, E.: TimeMAE: Self-Supervised Representations of Time Series with Decoupled Masked Autoencoders (2023) Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-88
  217. [1] Hönig, H.; Lorenz, B.: Low-Cost-Digitalisierung in der Produktion. Erste Schritte zur Vernetzung von Produktionsteilnehmern in KMU. Zeitschrift für wirtschaftlichen Fabrikbetrieb 112 (2017) 12, S. 895–898 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-94
  218. [2] Lanza, G., Rühl, J.; Peters, S.: Bewertung von Stückzahl und Variantenflexibilität in der Produktion. Produktionskosten und Risiken abhängig von Varianten und Stückzahlen. Zeitschrift für wirtschaftlichen Fabrikbetrieb 104 (2009) 11, S. 1039–1044 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-94
  219. [3] Westkämper, E., Bullinger; H.-J., Horváth, P.; Zahn, E.: Montageplanung – effizient und marktgerecht. Berlin: Springer-Verlag 2013 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-94
  220. [4] McCausland, L.: Engaging a Deskless Workforce. A white paper for communications professionals. Stand: 2020. Internet: www.shsmd.org/system/files/media/file/2020/04/Whitepaper%20-%20Engaging%20a%20Deskless%20Workforce%20%20-%20Lexi%20McCausland.pdf. Zugriff am 01.08.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-94
  221. [5] Quinyx: State of the Frontline Workforce 2024. Stand: 2024. Internet: www.quinyx.com/hubfs/Quinyx-State-of-the-Frontline-Workforce-Studie-2024.pdf. Zugriff am 31.07.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-94
  222. [6] Henke, J.: Eine Methodik zur Steigerung der Wertschöpfung in der manuellen Montage komplexer Systeme. Dissertation, Universität Stuttgart, 2015 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-94
  223. [7] Institut für Mittelstandsforschung IfM Bonn: KMU-Definition des IfM Bonn. Stand: 2025. Internet: www.ifm-bonn.org/definitionen-/kmu-definition-des-ifm-bonn. Zugriff am 31.07.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-94
  224. [8] Operations1: Homepage. Stand: 2025. Internet: operations1.com/de. Zugriff am 31.07.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-94
  225. [9] Testify: Homepage. Stand: 2025. Internet: www.testify.io/. Zugriff am 31.07.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-94
  226. [10] VKS: VKS. Werkerassistenzsystem. Stand: 2025. vksapp.com/de/werkerassistenzsystem, Zugriff am 31.07.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-94
  227. [11] SightProc GmbH: Werkerassistenzsystem. Digitale Werkerassistenz für Ihre Fertigungsprozesse. Effizienz und Qualität neu definiert. Internet: www.sightproc.de/. Zugriff am 31.07.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-94
  228. [12] Lindner, D.; Leyh, C.: Organizations in Transformation: Agility as Consequence or Prerequisite of Digitization? In: Abramowicz, W.; Paschke, A. (eds): Business Information Systems. BIS 2018. Lecture Notes in Business Information Processing 320. Cham: Springer, doi.org/10.1007/978–3–319–93931–5_7 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-94
  229. [13] Lindner, D.; Leyh, C.: Digitalisierung von KMU – Fragestellungen, Handlungsempfehlungen sowie Implikationen für IT-Organisation und IT-Servicemanagement. HMD Praxis der Wirtschaftsinformatik 56 (2019) 2, S. 402–418 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-94
  230. [14] Oberländer, M.; Bipp, T.: Do digital competencies and social support boost work engagement during the COVID-19 pandemic? Computers in human behavior 130 (2022), #107172 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-94
  231. [15] Prümper, J., Hartmannsgruber, K.; Frese, M.: KFZA – Kurzfragebogen zur Arbeitsanalyse. Zeitschrift für Arbeits-und Organisationspsychologie (1995) 39, S. 125–131 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-94
  232. [16] Schaufeli, W., Salanova, M., Gonzalez-Romá, V. et al.: The measurement of engagement and burnout: A confirmative analytic approach. Journal of Happiness Studies 3 (2002) 1, pp. 71–92 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-94
  233. [17] Hanebeck, J., Käppler, M., Lorenz, M. et al.: Entwicklung einer adaptiven Mensch-Maschine-Schnittstelle zur Unterstützung in der manuellen Montage. Smarte Technologien und Augmented Reality in der Arbeitswelt (2023), S. 19–21, doi.org/10.21934/baua:bericht20231027 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-94
  234. [18] Vue.js Organization: Vue.js. The Progressive JavaScript Framework. Stand: 2025. Internet: vuejs.org/. Zugriff am 31.07.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-94
  235. [19] Bootstrap: Bootstrap. Build fast, responsive sites with Bootstrap, 2025. Internet: getbootstrap.com/. Zugriff am 31.07.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-94
  236. [20] Prümper, J.; Anft, M.: ISONORM 9241/10. Beurteilung von Software auf Grundlage der Internationalen Ergonomie-Norm ISO 9241/10. Stand: 1993. Internet:www.torstenstapelkamp.de/wp-content/uploads/2017/08/Fragebogen_ISONORM_9241_10.pdf. Zugriff am 01.08.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-94
  237. [21] Guest, G.; Bunce, A.; Johnson, L.: How Many Interviews Are Enough? Field Methods 18 (2006) 1, pp. 59–82 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-94
  238. [1] Bang, K.; Markeset, T.: Impact of globalization on model of competition and companies’ competitive situation. In: Frick, J.; Laugen, B. T. (eds.): Advances in Production Management Systems. Value Networks: Innovation, Technologies, and Management. APMS 2011. IFIP AICT 384. Heidelberg. Springer-Verlag 2012, pp. 276–286 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-102
  239. [2] Pallant, J.; Sands, S; Karpen, I.: Product customization: a profile of consumer demand. Journal of Retailing and Consumer Services 54 (2020), #102030 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-102
  240. [3] Xiang, J.; Kong, D.; Zhang, F.: Labor cost, robots, and product quality. China Economic Review Volume 90, (2025), #102373 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-102
  241. [4] Sun, Q.; Gao, D.; Chen, X.; Sun, J.; Huang, N.; Gao, F.: A collaborative robotic screw assembly system using 6-PUS parallel mechanism. ASME 2023 International Design Engineering Technical Conferences and Computers and Information in Engineering (2023) pp. 179–186, doi.org/10.1115/DETC2023–114479 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-102
  242. [5] Liau, Y.; Ryu, K.: Task allocation in human-robot collaboration (HRC) based on task characteristics and agent capability for mold assembly. Procedia Manufacturing 51 (2020), pp. 179–186 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-102
  243. [6] Kötter, D.; Wiedon, G.; Meierkord, D. et al.: Development of an augmented reality user interface for collaborative robotics in quality inspection for manufacturing. 5th International Conference on Control and Robotics (ICCR), 2023, pp. 107–112 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-102
  244. [7] Ögren, P.; Sprague, C.: Behavior Trees in Robot Control Systems. Annual Review of Control, Robotics, and Autonomous Systems (2022), pp. 81–107, doi.org/10.48550/arXiv.2203.13083 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-102
  245. [8] Colledanchise, M.; Ögren, P.: Behavior Trees in Robotics and AI: An Introduction. CRC Press, doi.org/10.48550/arXiv.1709.00084 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-102
  246. [9] Liau, Y.; Ryu, K.: Status Recognition Using Pre-Trained YOLOv5 for Sustainable Human-Robot Collaboration (HRC) System in Mold Assembly. Sustainability 21 (2021) 13, #12044 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-102
  247. [10] Fukuda K. et al. Assembly Motion Recognition Framework Using Only Images. IEEE/SICE International Symposium on System Integration (SII) (2020), pp. 1242–1247 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-102
  248. [11] Mujahid, A. et al.: Real-Time Hand Gesture Recognition Based on Deep Learning YOLOv3 Model. Applied Sciences 11 (2021) 9, #4164 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-102
  249. [12] Kaczmarek, W. et al.: Industrial Robot Control by Means of Gestures and Voice Commands in Off-Line and On-Line Mode. Sensors 20 (2020) 21, #6358 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-102
  250. [13] Zhao, S. et al.: Assembly state detection based on deep learning and object matching. IEEE 18th International Conference on Automation Science and Engineering (CASE) (2022), pp. 1695–1700 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-102
  251. [14] Neto, P. et al.: Gesture-based human-robot interaction for human assistance in manufacturing. The International Journal on Advanced Manufacturing Technology 101 (2019) 1–4, pp. 119–135 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-102
  252. [15] Intel RealSense: D435i camera. Product description. Date: 2024. Internet: www.intelrealsense.com/depth-camera-d435i/. Accessed: 22.07.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-102
  253. [16] Polycam Learn: Homepage. Date: 2024. Internet: poly.cam/. Accessed: 22.07.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-102
  254. [17] Blender: Software description. Date: 2024. Internet: www.blender.org/about/. Accessed: 22.07.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-102
  255. [18] NVIDIA Isaac Sim. Framework description. Date: 2024. Internet: developer.nvidia.com/isaac/sim . Accessed: 22.07.2025 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-102
  256. [19] Trinh, M. et al.: Safe and Flexible Planning of Collaborative Assembly Processes Using Behavior Trees and Computer Vision. Intelligent Human Systems Integration (IHSI) 69 (2023), pp. 869–879 Google Scholar öffnen DOI: 10.37544/1436-4980-2025-07-08-102

Zitation

Download RIS Download BibTex

Downloads

Download Kapitel (PDF)

Hinweis

Dieses Werk ist urheberrechtlich geschützt und darf nur nach den Vorgaben der Nutzungs- und Lizenzvereinbarung genutzt werden. Jede darüber hinaus gehende Nutzung des Werkes ist ausdrücklich untersagt und wird verfolgt.

Per E-Mail teilen

Medien